Re: [Dvdrtools-users] Pioneer DVR-104 Problems

[Felix Maibaum]

Am Montag, 10. März 2003 02:29 schrieb Mike McLean:
> Hi,
>
> I've been having problems getting my Pioneer DVR-104 drive to work with
> dvdrecord.  I have DMA disabled as suggested and I get the following:
>
> bird media # dvdrecord dev=0,1,0 -v -pad -eject -dao speed=2

why do you use -pad? are you trying to burn cdda to a DVD?

> dvdrecord: Input/output error. send opc: scsi sendcmd: no error
> CDB:  54 01 00 00 00 00 00 00 00 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 70 00 03 00 00 00 00 0E 00 00 00 00 73 03 00 00
> Sense Key: 0x3 Medium Error, Segment 0
> Sense Code: 0x73 Qual 0x03 (power calibration area error) Fru 0x0
> Sense flags: Blk 0 (not valid)
> cmd finished after 10.145s timeout 200s
> dvdrecord: OPC failed.
> dvdrecord: fifo had 64 puts and 0 gets.
> dvdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.

Sounds like a media problem. have you tried different media? Have you tried a 
newer firmware? maybe the media type is newer than the firmware table?
also try specifying -force.

other than that and really making sure that hdparm -r0 -d0 is set, I don't 
have much advice for you.

bye

Felix