[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Gnuradio 3.8 on a Raspberry pi 4 B?
From: |
Harald Fritzsche (DD0VS) |
Subject: |
Re: Gnuradio 3.8 on a Raspberry pi 4 B? |
Date: |
Mon, 25 May 2020 23:41:35 +0200 |
Hello Barry,
i confirm that with that description on
https://wiki.gnuradio.org/index.php/InstallingGRFromSource_on_Raspberry_Pi
gnuradio was able to build following the instructions "From SOurce" in
about 100minutes on a rPI 4 (2GB).
I do not know, what was going wrong beginning of this year ...
During writing test are running. 130/243 passed.
My b200mini was runing with the newly build libuhd.
make install i will do later.
vy73
Harald
DD0VS
Am Mon, 25 May 2020 11:27:36 -0500
schrieb Barry Duggan <address@hidden>:
> Hi Glen,
>
> I have done several installs of GR 3.8 on my rPi 3B+. Here is the
> procedure:
> https://wiki.gnuradio.org/index.php/InstallingGRFromSource_on_Raspberry_Pi
>
> I don't have a rPi 4 yet, but am interested to know if that procedure
> fails on it. I am using 2020-02-13-raspbian-buster-full. Do not skip
> any steps! It takes about 4 hours.
>
> Regards,
- Re: Gnuradio 3.8 on a Raspberry pi 4 B?, (continued)
- Re: Gnuradio 3.8 on a Raspberry pi 4 B?, Kyeong Su Shin, 2020/05/29
- Re: Gnuradio 3.8 on a Raspberry pi 4 B?, Glen Langston, 2020/05/29
- Re: Gnuradio 3.8 on a Raspberry pi 4 B?, address@hidden, 2020/05/29
- Re: Gnuradio 3.8 on a Raspberry pi 4 B?, Ron Economos, 2020/05/29
- Re: Gnuradio 3.8 on a Raspberry pi 4 B?, Gwenhael Goavec-Merou, 2020/05/30
Gnuradio 3.8 on embedded [ARM] systems, address@hidden, 2020/05/26
Re: Gnuradio 3.8 on a Raspberry pi 4 B?, Barry Duggan, 2020/05/25
Re: Gnuradio 3.8 on a Raspberry pi 4 B?,
Harald Fritzsche (DD0VS) <=