I downloaded the latest version 6.07 and also the latest Qt 3.1.1
evaluation library and did exactly as is told in the README file. That
means, I used ./configure and then edited the Makefile. The project
compiles all the objects, without error messages but does not link them
together. I receive the following error message:
c++ -o electric.app/Contents/MacOS/electric src/cons/conlay.o
src/cons/conlin.o src/cons/conlingtt.o src/cons/conlinprs.o
src/cons/conlinttg.o src/cons/contable.o src/db/aidtable.o src/db/data.o
src/db/dbchange.o src/db/dbcontour.o src/db/dbcontrol.o src/db/dbcreate.o
src/db/dberror.o src/db/dbgeom.o src/db/dblang.o src/db/dblangelk.o
src/db/dblangjava.o src/db/dblangtcl.o src/db/dblibrary.o src/db/dbmath.o
src/db/dbmemory.o src/db/dbmerge.o src/db/dbmult.o src/db/dbnoproto.o
src/db/dbtech.o src/db/dbtechi.o src/db/dbtext.o src/db/dbvars.o
src/drc/drc.o src/drc/drcbatch.o src/drc/drcflat.o src/drc/drcquick.o
src/graph/graphqt.o src/graph/graphqtdlg.o src/graph/graphqtdraw.o
src/graph/graphdraw.o src/graph/moc_graphqt.o src/graph/moc_graphqtdlg.o
src/io/io.o src/io/iobinaryi.o src/io/iobinaryo.o src/io/iocifin.o
src/io/iocifout.o src/io/iocifpars.o src/io/iodefi.o src/io/iodxf.o
src/io/ioecado.o src/io/ioeagleo.o src/io/ioedifi.o src/io/ioedifo.o
src/io/iogdsi.o src/io/iogdso.o src/io/iohpglout.o src/io/iolefi.o
src/io/iolefo.o src/io/iolout.o src/io/iopadso.o src/io/iopsout.o
src/io/iosdfi.o src/io/iosuei.o src/io/iotexti.o src/io/iotexto.o
src/io/iovhdl.o src/misc/compact.o src/misc/compensate.o src/misc/erc.o
src/misc/ercantenna.o src/misc/logeffort.o src/misc/projecttool.o
src/net/netdiff.o src/net/netextract.o src/net/netflat.o src/net/network.o
src/pla/pla.o src/pla/placdecode.o src/pla/placio.o src/pla/placngrid.o
src/pla/placpgrid.o src/pla/placpla.o src/pla/placutils.o
src/pla/planfacets.o src/pla/planopt.o src/pla/planprog1.o
src/pla/planprog2.o src/rout/rout.o src/rout/routauto.o
src/rout/routmaze.o src/rout/routmimic.o src/rout/routriver.o src/sc/sc1.o
src/sc/sc1command.o src/sc/sc1component.o src/sc/sc1connect.o
src/sc/sc1delete.o src/sc/sc1electric.o src/sc/sc1err.o
src/sc/sc1extract.o src/sc/sc1interface.o src/sc/sc1maker.o
src/sc/sc1place.o src/sc/sc1route.o src/sc/sc1sim.o src/sim/sim.o
src/sim/simals.o src/sim/simalscom.o src/sim/simalsflat.o
src/sim/simalsgraph.o src/sim/simalssim.o src/sim/simalsuser.o
src/sim/simfasthenry.o src/sim/simirsim.o src/sim/simmossim.o
src/sim/simpal.o src/sim/simsilos.o src/sim/simsim.o src/sim/simspice.o
src/sim/simspicerun.o src/sim/simtexsim.o src/sim/simverilog.o
src/sim/simwindow.o src/tec/tecart.o src/tec/tecbicmos.o
src/tec/tecbipolar.o src/tec/teccmos.o src/tec/teccmosdodn.o
src/tec/tecefido.o src/tec/tecfpga.o src/tec/tecgem.o src/tec/tecgen.o
src/tec/tecmocmos.o src/tec/tecmocmosold.o src/tec/tecmocmossub.o
src/tec/tecnmos.o src/tec/tecpcb.o src/tec/tecrcmos.o src/tec/tecschem.o
src/tec/tectable.o src/usr/usr.o src/usr/usrarc.o src/usr/usrcheck.o
src/usr/usrcom.o src/usr/usrcomab.o src/usr/usrcomcd.o src/usr/usrcomek.o
src/usr/usrcomln.o src/usr/usrcomoq.o src/usr/usrcomrs.o
src/usr/usrcomtv.o src/usr/usrcomwz.o src/usr/usrctech.o
src/usr/usrdiacom.o src/usr/usrdiaedit.o src/usr/usrdisp.o
src/usr/usreditemacs.o src/usr/usreditpac.o src/usr/usredtecc.o
src/usr/usredtecg.o src/usr/usredtecp.o src/usr/usrgraph.o
src/usr/usrhigh.o src/usr/usrmenu.o src/usr/usrmisc.o src/usr/usrnet.o
src/usr/usrparse.o src/usr/usrstatus.o src/usr/usrterminal.o
src/usr/usrtrack.o src/usr/usrtranslate.o src/usr/usrwindow.o
src/vhdl/vhdl.o src/vhdl/vhdlexpr.o src/vhdl/vhdlnetlisp.o
src/vhdl/vhdlparser.o src/vhdl/vhdlals.o src/vhdl/vhdlquisc.o
src/vhdl/vhdlsemantic.o src/vhdl/vhdlsilos.o -lSM
-lICE -L/usr/X11R6/lib
-L/Users/tecey/QtEval3.1.1//lib -lqui -prebind -framework Carbon -lqt
-lm -lpthread
ld: can't locate file for: -lqui
make: *** [electric.app/Contents/MacOS/electric] Error 1
what is the problem here?
can anybody help me?