[Commit-gnuradio] r8527 - usrp2/trunk/fpga/top/u2_core

[matt]

Author: matt
Date: 2008-05-28 18:39:37 -0600 (Wed, 28 May 2008)
New Revision: 8527

Modified:
   usrp2/trunk/fpga/top/u2_core/u2_core.v
Log:
debug line changes


Modified: usrp2/trunk/fpga/top/u2_core/u2_core.v
===================================================================
--- usrp2/trunk/fpga/top/u2_core/u2_core.v      2008-05-29 00:35:10 UTC (rev 
8526)
+++ usrp2/trunk/fpga/top/u2_core/u2_core.v      2008-05-29 00:39:37 UTC (rev 
8527)
@@ -146,7 +146,8 @@
    wire [31:0]         debug_gpio_0, debug_gpio_1;
    wire [31:0]         atr_lines;
 
-   wire [31:0]         debug_rx, debug_mac0, debug_mac1, debug_txc, 
debug_serdes0, debug_serdes1, debug_serdes2;
+   wire [31:0]         debug_rx, debug_mac0, debug_mac1, debug_txc, 
debug_serdes0, debug_serdes1, debug_serdes2,
+               debug_rx_dsp;
    // 
///////////////////////////////////////////////////////////////////////////////////////////////
    // Wishbone Single Master INTERCON
    parameter   dw = 32;  // Data bus width
@@ -524,7 +525,8 @@
      (.clk(dsp_clk),.rst(dsp_rst),
       .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data),
       .adc_a(adc_a),.adc_ovf_a(adc_ovf_a),.adc_b(adc_b),.adc_ovf_b(adc_ovf_b),
-      .sample(sample_rx), .run(run_rx_d1), .strobe(strobe_rx) );
+      .sample(sample_rx), .run(run_rx_d1), .strobe(strobe_rx),
+      .debug(debug_rx_dsp) );
 
    tx_control #(.FIFOSIZE(10)) tx_control
      (.clk(dsp_clk), .rst(dsp_rst),
@@ -625,7 +627,7 @@
    assign      debug_clk[1] = dsp_clk; 
    
    assign      debug = {{strobe_rx,adc_ovf_a,adc_a},{run_rx,adc_ovf_b,adc_b}}; 
-   assign      debug_gpio_0 = sample_rx;
+   assign      debug_gpio_0 = 32'b0;
    assign      debug_gpio_1 = 32'b0; 
    
 endmodule // u2_core