[Commit-gnuradio] r8349 - usrp2/trunk/firmware/lib

[eb]

Author: eb
Date: 2008-05-09 16:29:43 -0600 (Fri, 09 May 2008)
New Revision: 8349

Modified:
   usrp2/trunk/firmware/lib/db_basic.c
   usrp2/trunk/firmware/lib/db_init.c
Log:
finds daughterboard

Modified: usrp2/trunk/firmware/lib/db_basic.c
===================================================================
--- usrp2/trunk/firmware/lib/db_basic.c 2008-05-09 21:31:14 UTC (rev 8348)
+++ usrp2/trunk/firmware/lib/db_basic.c 2008-05-09 22:29:43 UTC (rev 8349)
@@ -49,6 +49,7 @@
   //.base.atr_tx_delay =       0,
   //.base.atr_rx_delay =       0,
 
+  .base.init = db_basic_init,
   .base.set_freq = db_basic_set_freq,
   .base.set_gain = db_basic_set_gain,
   .base.set_tx_enable = db_basic_set_tx_enable,
@@ -74,6 +75,7 @@
   //.base.atr_tx_delay =       0,
   //.base.atr_rx_delay =       0,
 
+  .base.init = db_basic_init,
   .base.set_freq = db_basic_set_freq,
   .base.set_gain = db_basic_set_gain,
   .base.set_tx_enable = db_basic_set_tx_enable,
@@ -99,6 +101,7 @@
   //.base.atr_tx_delay =       0,
   //.base.atr_rx_delay =       0,
 
+  .base.init = db_basic_init,
   .base.set_freq = db_basic_set_freq,
   .base.set_gain = db_basic_set_gain,
   .base.set_tx_enable = db_basic_set_tx_enable,
@@ -124,6 +127,7 @@
   //.base.atr_tx_delay =       0,
   //.base.atr_rx_delay =       0,
 
+  .base.init = db_basic_init,
   .base.set_freq = db_basic_set_freq,
   .base.set_gain = db_basic_set_gain,
   .base.set_tx_enable = db_basic_set_tx_enable,

Modified: usrp2/trunk/firmware/lib/db_init.c
===================================================================
--- usrp2/trunk/firmware/lib/db_init.c  2008-05-09 21:31:14 UTC (rev 8348)
+++ usrp2/trunk/firmware/lib/db_init.c  2008-05-09 22:29:43 UTC (rev 8349)
@@ -79,6 +79,9 @@
   unsigned char buf[DB_EEPROM_CLEN];
 
   usrp_dbeeprom_status_t s = read_raw_dboard_eeprom (buf, i2c_addr);
+
+  //printf("\nread_raw_dboard_eeprom: %d\n", s);
+
   switch (s){
   default:
   case UDBE_NO_EEPROM:
@@ -148,10 +151,12 @@
 {
 
   tx_dboard = lookup_dboard(I2C_ADDR_TX_A, &db_basic_tx, "Tx");
+  //printf("db_init: tx dbid = 0x%x\n", tx_dboard->dbid);
   set_gpio_mode(GPIO_TX_BANK, tx_dboard);
   tx_dboard->init(tx_dboard);
 
   rx_dboard = lookup_dboard(I2C_ADDR_RX_A, &db_basic_rx, "Rx");
+  //printf("db_init: rx dbid = 0x%x\n", rx_dboard->dbid);
   set_gpio_mode(GPIO_RX_BANK, rx_dboard);
   rx_dboard->init(rx_dboard);
 }