bug-xboard
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Bug-XBoard] Gpsshogi don't work


From: Sam Daille
Subject: Re: [Bug-XBoard] Gpsshogi don't work
Date: Fri, 12 Jul 2019 12:38:22 +0200

I had the 4.8.0-2 version of Xboard, and I must have installed it with a sudo apt-get install command. Maybe I could try to change the line -uxiAdapter for the basic one (as the uc2wb don't work) ?

My last trials : gtockfish run on the command line, and it works perfectly with Polyglot.on xboard (as sjaakii).

gpshogi run on the command line, but then as I said when I enter usi it just reply usi and so on, without any indications. I had forgotten to ,tell you, but in the /usr/games/ there is, with gpsshogi, a gpsviewer and a gpsusi - can it disturb the uc2wb ?

(I didn't try yet to open shokidoki with ./shokidoki-x64 after re-installing it, I'll do this this weekend... And maybe I'll try to compile Bonanza too.)



Le ven. 12 juil. 2019 à 10:52, <address@hidden> a écrit :
I still have one question: which version of XBoard are you using (in Help
-> About)? I have been looking at the installation script of UCI2WB,
because it puzzled me that your setting for -uxiAdapter originally was an
empty string, even though you had installed UCI2WB. (So that hand-editing
of .xboardrc was needed.)

It turned out the install script of UCI2WB indeed is flawed (it sets the
-uxiAdapter in the user settings of 'root' instead of yours, because the
install will be done through the 'sudo' command). But that should not have
mattered, as any recent XBoard should already have been pre-configured to
use UCI2WB as -uxiAdapter, (through the accompanying master settings file
xboard.conf, which should be in /etc, /etc/xboard or /usr/local/etc
depending on how you installed XBoard), even if you have not installed
UCI2WB at all.

Op Do, 11 juli, 2019 2:25 pm schreef Sam Daille:
> I'll try all this, but I wonder if I had the same problem with another
> interface like tagua ?
>
> Le jeu. 11 juil. 2019 à 13:57, <address@hidden> a écrit :
>
>
>> Oh, I was a bit wrong in my previous message. It appears I actually did
>>  compile Bonanza on Ubuntu 10.04. And the required command is
>>
>> make gcc
>>
>> not just "make". And you should make sure you take the latest snapshot
>> of the 'test' branch of the repository, not the 'main' branch, which is
>> initially displayed. (The latter holds the original Bonanza source I
>> used as a starting point.)
>>
>> I just pushed a new commit to that 'test' branch, as although compiling
>>  worked on Ubuntu 10.04, it no longer did on Ubuntu 18.10. This was due
>> to the required libraries being mentioned near the start of the compile
>> command, rather than at the end. After I changed that it also compiles
>> on Ubuntu 18.10. It does give a few bogus warnings in the file csa.c
>> (which
>> contains code that would not be executed if you use it as an XBoard
>> engine). Just ignore those.
>>
>> Op Do, 11 juli, 2019 11:34 am schreef Sam Daille:
>>
>>> I have forgotten one thing : if you can explain me how to compil
>>> Bonanza
>>> using the files on your website, it will be nice of you. At first
>>> sight, it seems complicated to me...
>>>
>>> Le jeu. 11 juil. 2019 à 11:06, Sam Daille <address@hidden> a
>>> écrit
>>> :
>>>
>>>
>>>
>>>> I made few trials and I discovered :
>>>>
>>>>
>>>>
>>>> * that shokidoki certainly had a compilation problem : when I
>>>> entered it in the prompt command, it's unknown, unlike gpshsogi (my
>>>> ubuntu is xenial, 16, which is far from 10) ;
>>>>
>>>>
>>>> * that gpsshogi can't be opened step by step as you suggested (when
>>>> I
>>>> put usi, it says usi, and so on) ;
>>>>
>>>> * that sjaakii don't work when I change the lines in .xboardrc (so
>>>> maybe I did a wrong thing ; the other engines don't work, but I
>>>> expected it) ;
>>>>
>>>> * that (which may explain my problems) polyglot wasn't installed on
>>>> my computer...
>>>>
>>>> So I'm going to try again with polyglot installed, and I'll say if
>>>> it works (I hope).
>>>>
>>>> Le mer. 10 juil. 2019 à 10:02, <address@hidden> a écrit :
>>>>
>>>>
>>>>
>>>>> Op Wo, 10 juli, 2019 8:27 am schreef Sam Daille:
>>>>>
>>>>>
>>>>>> Thanks, I misunderstood the UCI/USI problem, now it's clearer.
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> I installed uci2wb (and sjaakii and shokidoki), but the problem
>>>>>>  remains
>>>>> :
>>>>>
>>>>>
>>>>>> when I changed the lines -adapterCommand -uxiAdapter on my
>>>>>> .xboardrc
>>>>>>
>>>>>>
>>>>> (by
>>>>>
>>>>>
>>>>>> the prompt command or in hand), gpshsogi or shokidoki don't
>>>>>> work (but
>>>>>> sjakii work without this change, and it plays better than
>>>>>> gnushogi
>>>>> indeed
>>>>>> ^_^).
>>>>>>
>>>>>>
>>>>>
>>>>> OK, one thing at the time...
>>>>>
>>>>>
>>>>>
>>>>> It is strange that Shokidoki doesn't work; this is not a USI
>>>>> engine, so the adapter commands should not matter for it, and you
>>>>> should be able to run it simply by "xboard -fcp shokidoki" from
>>>>> the command line (if the
>>>>> shokidoki binary is installed in a directory that is in your path,
>>>>>  like /usr/local/bin/), or "xboard -fcp ./shokidoki" if it is in
>>>>> the current directory. Like sjaakii.
>>>>>
>>>>> Shokidoki is closed source, so I only distribute the binary,
>>>>> which I compiled on my own Linux VM. Problem might be that this
>>>>> was an Ubuntu 10.04 machine, and that this is now so outdated that
>>>>> binaries from there so not work anymore on recent Ubuntus. Perhaps
>>>>> you could try to run it from the command line directly (i.e.
>>>>> wiythout XBoard), through "./shokidoki", and then type
>>>>>
>>>>>
>>>>>
>>>>> xboard protover 2
>>>>>
>>>>> to see if and how it responds?
>>>>>
>>>>>
>>>>> For GPS Shogi the same problem could apply. So the first step
>>>>> here would also be to try to run it from the command line, thoughe
>>>>> the command "gpsshogi". (Or perhaps "./gpsshogi", depending on
>>>>> where it was installed. I will assume in the following that the
>>>>> required command is simply "gpsshogi".) If it starts you should
>>>>> type the line
>>>>>
>>>>>
>>>>> usi
>>>>>
>>>>> to it, and see if it responds by printing some "option name ..."
>>>>> lines followed by "usiok". And after that type "isready", to
>>>>> which it should respond with "readyok".
>>>>>
>>>>> If this works the next step would be to test it in combination
>>>>> with UCI2WB, through the command "uci2wb -s gpsshogi .", and type
>>>>>
>>>>>
>>>>>
>>>>> xboard protover 2
>>>>>
>>>>> This should make it print a number of 'feature' lines ending with
>>>>>  "feature
>>>>> done=1". Typing
>>>>>
>>>>> post memory 64 new variant shogi level 40 5 0 time 10000 go
>>>>>
>>>>> to it should set it thinking, and finally print a move.
>>>>>
>>>>> If this does work the problem must be in the interaction with
>>>>> XBoard.
>>>>> To
>>>>> fiugure that out, first change the -uxiAdapter in the .xboardrc
>>>>> file to
>>>>>
>>>>> -uxiAdapter {uci2wb debug -%variant "%fcp" "%fd"}
>>>>>
>>>>>
>>>>>
>>>>> and start XBoard with the command
>>>>>
>>>>> xboard -variant shogi -fcp gpsshogi -fUSI -debug
>>>>>
>>>>> The inclusion of the extra 'debug' options should make UCI2WB
>>>>> report everything it does to XBoard, and make XBoard save all
>>>>> communication with UCI2WB on a file xboard.debug in the current
>>>>> directory. If things get stuck, just quit XBoard and attach that
>>>>> file to the e-mail so I can see what is going on.
>>>>>
>>>>>>
>>>>>>
>>>>>> I noticed that in the .xboardrc there wasn't first an
>>>>>> -uxiAdapter
>>>>>> line, so maybe this line is useless ? Or maybe there is another
>>>>>> problem in the settings ?
>>>>>
>>>>> The -uxiAdapter setting specifies which command XBoard should
>>>>> issue for an engine that was accompanied by the option -fUSI /
>>>>> -sUSI. Where
>>>>> words starting with '%' refer to the value of the XBoard option
>>>>> with the corresponding name. XBoard has no hard-coded default for
>>>>> this, so if it was not set to a value in the master settings file,
>>>>> it will be defined as empty string, and the -fUSI/-sUSI option
>>>>> (and USI/UCCI
>>>>> checkbox in the menu dialog, which add that option) would not
>>>>> work. This was originally
>>>>> the case, as the .xboardrc you mailed me contained
>>>>>
>>>>> -adapterCommand 'polyglot -noini -ec "%fcp" -ed "%fd" -uci
>>>>> NalimovCache=%defaultCacheSizeEGTB -pg ShowTbHits=true'
>>>>> -uxiAdapter ""
>>>>>
>>>>>
>>>>>
>>>>> which has it as an empty string. From the point-of-view of Ubuntu
>>>>>  package distribution that makes sense, as when you have not
>>>>> installed UCI2WB yet
>>>>> it could not work anyway. Ideally installing of UCI2WB would
>>>>> automatically set the -uxiAdapter in XBoard's settings to use it
>>>>> (as
>>>>> in theory there could be other USI adapters that you could have
>>>>> installed instead). The UCI2WB install procedure might not be
>>>>> smart enough to do that, though. This is why I wrote you should
>>>>> check it first.
>>>>>
>>>>> You can see that originally the -adapterCommand (used for engines
>>>>>  that specify -fUCI) originally was set to use Polyglot, which is
>>>>> a Chess-only
>>>>> adapter for UCI (and should also be installed as a separate Ubuntu
>>>>>  package before the -fUCI option can work). UCI2WB should be able
>>>>> to do the job as well, though, but there is no harm in having both
>>>>> UCI2WB
>>>>> and Polyglot on your system, so there isn't really any need to
>>>>> change -adapterCommand as
>>>>> long as you have Polyglot installed. This pertains to the problem
>>>>> of running Stockfish.
>>>>>
>>>>>>
>>>>>> I joined you a copy of my .xboardrc, it may help.
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> Le mar. 9 juil. 2019 à 17:43, <address@hidden> a écrit
>>>>>> :
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>> Neither Stockfish nor GPS Shogi support XBoard protocol; they
>>>>>>> can only be used on XBoard with the aid of an adapter.
>>>>>>> Stockfish
>>>>>>> communicates in UCI, and GPS Shogi in USI. The UCI2WB adapter
>>>>>>> can handle both these protocols. So to use these engines you
>>>>>>> have to
>>>>>>>
>>>>>>>
>>>>>>> 1) install uci2wb on your computer,
>>>>>>> 2) make sure xboard is configured to use UCI2WB as adapter
>>>>>>> rather than Polyglot, 3) use the -fUCI or -fUSI options when
>>>>>>> starting XBoard from the command line, (e.g. "xboard -fcp
>>>>>>> stockfish -fUCI"), or tick the UCI or USI/UCCI
>>>>>>> checkbox when you embed the engine through the Load Engine
>>>>>>> dialog.
>>>>>>>
>>>>>>>
>>>>>>> To make sure step (2) is realized you could open the
>>>>>>> .xboardrc
>>>>>>> file (where the user settings for XBoard are saved) in your
>>>>>>> home directory with a text editor, and look at the value of
>>>>>>> the -adapterCommand and -uxiAdapter. The value for these should
>>>>>>> be
>>>>>>>
>>>>>>> -adapterCommand {uci2wb "%fcp" "%fd"}
>>>>>>> -uxiAdapter {uci2wb -%variant "%fcp" "%fd"}
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Only if this would not work there would be a genuine problem.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Note that GNUshogi is so buggy that it plays like total crap,
>>>>>>> and can randomly decide to overlook even mate in 1. There are
>>>>>>> a number of engines that are able to play decent Shogi on
>>>>>>> XBoard without
>>>>>>> adapter, though; in order of increasing strength these are
>>>>>>> Sjaak
>>>>>>> II, CrazyWa,
>>>>>>> Shokidoki and
>>>>>>> Bonanza (the XBoard version in my on-line repository
>>>>>>> http://hgm.nubati.net/cgi-bin/gitweb.cgi ). I am not sure the
>>>>>>> latter would be weaker than GPS Shogi.
>>>>>>>
>>>>>>> Op Di, 9 juli, 2019 5:09 pm schreef Sam Daille:
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>> Hello.
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> I'm on Ubuntu Xenial and I installed Xboard to play chess
>>>>>>>> and shogi, but :
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> * Gpsshogi don't work (it never plays) when I open Xboard
>>>>>>>> with it (-variant shogi -fcp gpsshogi)
>>>>>>>>
>>>>>>>> * Stockfish don't work when I open xboard with it (-fcp
>>>>>>>> stockfish), it don't want to play and exit when I try to
>>>>>>>> force it to move now, but this bug is well-known :
>>>>>>>> http://savannah.gnu.org/bugs/?56024
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> I tried to limit the reflexion time and to change the size
>>>>>>>> of the board, but no way.
>>>>>>>>
>>>>>>>> Do you have some ideas to suggest to me ? I'm ready to try
>>>>>>>> anything (because Gnushogi on Xshogi is really to weak for
>>>>>>>> me...)
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> Thanks a lot.
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> Sam
>>>>>>>> _______________________________________________
>>>>>>>> Bug-XBoard mailing list
>>>>>>>> address@hidden
>>>>>>>> https://lists.gnu.org/mailman/listinfo/bug-xboard
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>>
>>>
>>
>>
>>
>



reply via email to

[Prev in Thread] Current Thread [Next in Thread]