RE: [Bayonne-devel] About the method of acquiring caller ID

[Julien Chavanton]

Did you try the analog line on a phone with a callerid display
Just to be sure the callerid is provided on the line.

Julien

-----Original Message-----
From: address@hidden
[mailto:address@hidden
g] On Behalf Of Tomoya Yoshida
Sent: April 13, 2005 4:30 AM
To: address@hidden
Subject: [Bayonne-devel] About the method of acquiring caller ID

Hi all 

Please teach the method of acquiring the caller ID at inbound. 

I am using the "D41JCT-LS" board. 
The line is an analog network of Japan.

Middleware uses bayonne. 
The following sample scripts were made, 
and the acquisition of the caller ID at inbound was 
executed actually.
----------------------------------------------------------------
<test.scr>
 answer.intercom

    slog.info "1 %session.callerid
    slog.info "2 %session.calledid
    slog.info "3 %pstn.clid
    slog.info "4 %pstn.dnid

 exit
----------------------------------------------------------------
However, all information becomes "UNKNOWN" as for the result.

Are another some settings necessary to acquire caller ID?
    For instance, "/etc/bayonne.conf", "/etc/bayonne.sched", 
    and "/usr/dialogic/cfg/dialogic.cfg", etc.

Please teach the setting method by all means 
when succeeding in the acquisition of caller ID comes.

There is no thing that it is not possible to acquire it 
because it is a line in Japan.

Please my best regards. 



_______________________________________________
Bayonne-devel mailing list
address@hidden
http://lists.gnu.org/mailman/listinfo/bayonne-devel