RE: [Bayonne-devel] (D/600 JCT 2E1 120) Feature Pack 1 ?

[Julien Chavanton]

Well I did found documentation about it is merged with FP1.

Intel Dialogic System Release 5.1.1 Feature Pack 2 for Linux

http://resource.intel.com/telecom/support/releases/unix51/linux51fp1/Onl
doc/update/relnotes.pdf


-----Original Message-----
From: David Sugar [mailto:address@hidden 
Sent: January 28, 2005 10:29 AM
To: Julien Chavanton
Cc: address@hidden
Subject: Re: [Bayonne-devel] (D/600 JCT 2E1 120) Feature Pack 1 ?

I am not aware of a 5.0 "sp2" release under gnu/linux, though there is a

6.0 release that supports compact pci cards which is less widely seen.

Julien Chavanton wrote:
> I am wandering witch version of Dialogic System release I should be
> running with (D/600 JCT 2E1 120) ?
> 
> I will try Feature Pack 1 
> 
> But still for springware board we need to use the almost obsolete
> Kernel.
> 
> I learn today that Feature Pack 2 was released in 2004.
> 
> 
> Julien
> 
> 
> -----Original Message-----
> From:
address@hidden
>
[mailto:address@hidden
> g] On Behalf Of David Sugar
> Sent: January 26, 2005 5:56 AM
> To: Ambar Roy
> Cc: address@hidden
> Subject: Re: [Bayonne-devel] E1 CTR4 Prompt / Time slot problem - must
> usecable
> 
> And in the case of bayonne, it simply assigns available voice
resources 
> to digital timeslots as it finds resources, without considering card 
> boundries.  Many dialogic cards have more voice resources than 
> terminations, so one cannot assume in a multi-card configuration that 
> the voice resources are assigned or match exclusivily by card.  For
this
> 
> reason, if you have multiple sc-bus cards, you MUST have the sc-bus 
> cable connected.  If not, you will likely have a few dead ports at the

> start of each card boundry since the voice resource was likely
assigned 
> from the previous card.
> 
> Ambar Roy wrote:
> 
>>Hi Julien,
>> 
>>Do you have only 1 card or multiple cards?
>> 
>>On a multi card setup I have noticed that if the CT Bus cable is
> 
> faulty 
> 
>>or not connected, then the second and subsequent cards sometimes do
> 
> not 
> 
>>play prompts or recognise DTMF. The app works fine!
>> 
>>My experience has been with with R4 PRI API under Windows, but I guess
> 
> 
>>the Linux versions also work in a similar fashion!
>> 
>>Ambar Roy
>>
>>    ----- Original Message -----
>>    *From:* Julien Chavanton
> 
> <mailto:address@hidden>
> 
>>    *To:* Julien Chavanton
> 
> <mailto:address@hidden>
> 
>>    ; address@hidden <mailto:address@hidden>
>>    *Sent:* Wednesday, January 26, 2005 12:01 AM
>>    *Subject:* RE: [Bayonne-devel] E1 CTR4 Prompt / Time slot problem
>>
>>    I still have this problem in London the prompt sometime the prompt
>>    do not play.
>>
>>     
>>
>>    I am wandering if this is Globalcall or D/600 JCT 2E1 120 problem.
>>
>>     
>>
>>    Since bayonne behavior with prompt is quite simple to follow SCSA
> 
> is
> 
>>    made on startup and reuse until the server is restarted so if the
>>    prompt is playing correctly once on a particular channel
>>
>>    It should play next time or al least it wont be SCBus routing
> 
> problem.
> 
>>     
>>
>>    Anyone using D/600 JCT 2E1 120 + SR5SP1 + Globallcall ISDN
> 
> ctr4.prm
> 
>>     
>>
>>    Julien
>>
>>     
>>
>>
> 
>
------------------------------------------------------------------------
> 
>>    *From:*
>>    address@hidden
>>
> 
>
[mailto:address@hidden
> g]
> 
>>    *On Behalf Of *Julien Chavanton
>>    *Sent:* January 21, 2005 10:14 AM
>>    *To:* address@hidden
>>    *Subject:* [Bayonne-devel] E1 CTR4 Prompt / Time slot problem
>>
>>     
>>
>>    I am having strange problem on a server I have set in London.
>>
>>     
>>
>>    Sometime the Bayonne is playing a prompt and I do not hear it on
> 
> the
> 
>>    line.
>>
>>    I do not think it is an SCSA routing problem because we would have
>>    noticed such problem before, but I am not completely sure.
>>
>>    I have activated some debugging and apparently everything looks
> 
> fine.
> 
>>    I have tried Dialogic & Globalcall drivers, same behavior.
>>
>>     
>>
>>    I think this can be caused by the Telco switch "time slot
>>    connection" because sometime I hear a prompt that is not on my
>>    server, the D channel is always
>>
>>    Receiving and sending information correctly.
>>
>>     
>>
>>    This is hard to debug, so I would just like to have feed-back from
>>    people using Bayonne on E1 ctr4 to see if everything is fine for
> 
> them.
> 
>>     
>>
>>    Is there a test application I could use that would play prompt on
> 
> E1
> 
>>    ISDN so I can be sure Bayonne is not the source of the problem?
>>
>>     
>>
>>    Julien
>>
>>     
>>
>>     
>>
>>    I have 2x  DIALOGIC D/600 JCT 2E1 120
>>
>>     
>>
>>    Configured as follow:
>>
>>     
>>
>>    [Genload - All Boards]
>>
>>    LogFile=genload.log
>>
>>    BLTAddress = D8000
>>
>>    Dialog/HD=YES
>>
>>    BusType=SCBus
>>
>>    SCBusClockMaster=AUTOMATIC
>>
>>    SCBusClockMasterSource=AUTOMATIC
>>
>>    PCMEncoding=ALAW
>>
>>    ISABusWidth=16-BIT
>>
>>     
>>
>>    [Genload - ID 2] /* DCB/xxxSC */
>>
>>     
>>
>>    [Genload - PCI ID 0] /* Dual T1/E1 PCI HD */
>>
>>    ParameterFile=ctr4.prm
>>
>>    ParameterFile2=ctr4.prm
>>
>>    ISDNProtocol=ctr4
>>
>>    ISDNProtocol2=ctr4
>>
>>     
>>
>>    [Genload - PCI ID 1] /* Dual T1/E1 PCI HD */
>>
>>    ParameterFile=ctr4.prm
>>
>>    ParameterFile2=ctr4.prm
>>
>>    ISDNProtocol=ctr4
>>
>>    ISDNProtocol2=ctr4
>>
>>
> 
>
------------------------------------------------------------------------
> 
>>    _______________________________________________
>>    Bayonne-devel mailing list
>>    address@hidden
>>    http://lists.gnu.org/mailman/listinfo/bayonne-devel
>>
>>
>>
> 
>
------------------------------------------------------------------------
> 
>>_______________________________________________
>>Bayonne-devel mailing list
>>address@hidden
>>http://lists.gnu.org/mailman/listinfo/bayonne-devel
> 
> 
> 
> _______________________________________________
> Bayonne-devel mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/bayonne-devel
> 
> 
> _______________________________________________
> Bayonne-devel mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/bayonne-devel
>