[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [avrdude-dev] invalid pin definition - Configured as pin 12, but hig
|
From: |
Hannes Weisbach |
|
Subject: |
Re: [avrdude-dev] invalid pin definition - Configured as pin 12, but highest pin is 11. |
|
Date: |
Mon, 13 Aug 2012 20:20:00 +0200 |
>
> Will somebody update the config file if there was a renumbering of pins? How
> would I know which numbers should I use? My LEDs are connected to pins
> AC[4..7] (#30,32,33,34 on FT2232HL)
>
> Or rather update the limit so that these numbers will be correctly
> interpreted as bits of the two 8 bit ports (AD+AC).
Thanks for the report, I'll have a look. You can ignore the error - it does not
interfere with programming, aside from the LEDs not flashing.
Best regards,
Hannes