[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [avrdude-dev] AVR910 with firmware 3.2 - two problems
From: |
Jan-Hinnerk Reichert |
Subject: |
Re: [avrdude-dev] AVR910 with firmware 3.2 - two problems |
Date: |
Sat, 17 Apr 2004 21:48:13 +0200 |
User-agent: |
KMail/1.5.4 |
On Thursday 25 March 2004 12:35, Thomas Fischl wrote:
> I've built an avr910 programmer based on AT90S2313 with firmware
> version 3.2. I used the description from
> http://www.mikrocontroller-projekte.de/. With AVRDUDE there are two
> problems:
> 1. the single-byte 'y' command to clear the LED in
> avr910_write_setup. This was discussed earlier on the list, but the
> current CVS version still has this problem.
I have just commited a patch I had supposed in a post on February
16th.
> 2. write memory command fails after the first page is written to
> the device. the programmer needs the address before the pagedata
> are written: setaddress ('A'), load page data ('c'/'C'), setaddress
> ('A'), write page ('m'). It seems that AvrProg and UISP also use
> this sequence for programming the flash.
Ups, I always thought that avrdude behaves like this. I will have a
closer look at this.
Cheers
Jan-Hinnerk
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- Re: [avrdude-dev] AVR910 with firmware 3.2 - two problems,
Jan-Hinnerk Reichert <=