[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [avrdude-dev] Support for Altera Byte Blaster
From: |
Volkmar Dierkes |
Subject: |
Re: [avrdude-dev] Support for Altera Byte Blaster |
Date: |
Sun, 23 Mar 2003 21:21:15 +0100 |
User-agent: |
40tude_Dialog/2.0.3.1 Hamster/2.0.0.1 Hamster/2.0.0.1 |
Joerg,
On Sun, 23 Mar 2003 20:40:40 +0100, Joerg Wunsch wrote:
> As Volkmar Dierkes wrote:
>
>> I tried to integrate this type of programmer to avrdude, but I am
>> not successfull because the Byte Blaster has a special io pin which
>> have to be on low level for the whole time where avrdude is
>> accessing the atmel mcu. I didn't found such a pin definition in
>> avrdude.
>
> "buff" should be possible. It's used by those dongles that have an
> internal buffer/driver chip to enable the driver. Since these driver
> chips have low-active enable pins, i think that's what you want.
>
> And it seems it's another bit that's not documented on top...
Thanks for that information. I tried it, but I got an error because
buff must be one of the pins from the range 2-9. But the Byte
Blaster is expecting this function on pin 14. And additional to pin
14 there is another output possible: pin 16.
Volkmar