[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [avr-gcc-list] power on mega 103
From: |
nurdin |
Subject: |
Re: [avr-gcc-list] power on mega 103 |
Date: |
Fri, 23 Jan 2004 20:22:57 +0700 |
the parallel programer that i mean is value added isp dongle :)
----- Original Message -----
From: "nurdin" <address@hidden>
To: <address@hidden>; "Peter Bosscha" <address@hidden>
Sent: Friday, January 23, 2004 4:09 PM
Subject: Re: [avr-gcc-list] power on mega 103
> but btw i use parallel programer,can i use parallel programer for
mega103?or
> serial programer is the only way to program it?
>
> thanx alot to all gurus :)
>
> Rakhmat Nurdin
>
> ----- Original Message -----
> From: "Peter Bosscha" <address@hidden>
> To: <address@hidden>; <address@hidden>
> Sent: Friday, January 23, 2004 1:59 PM
> Subject: Re: [avr-gcc-list] power on mega 103
>
>
> > Hi,
> >
> > PEN does not need to be connected.
> > Please note that to program you need to connect RXD0 and TXD0 (NOT mosi
> > & miso), ATMEL caught me the first time too..
> >
> > Regards
> > Peter
> >
> > >>> "nurdin" <address@hidden> 23/01/2004 08:52:55 >>>
> > im using value added isp dongle. i've connected:
> > -sck, mosi,miso,rst
> > -two pairs of vcc - gnd
> > -avcc - agnd
> > -xtal1 & xtal2
> > -PEN to vcc (set high)
> >
> > is there something left?
> > thanx for all your responses.
> > regards,
> >
> > Rakhmat Nurdin
> >
> > ----- Original Message -----
> > From: "Joerg Wunsch" <address@hidden>
> > To: <address@hidden>
> > Sent: Wednesday, January 21, 2004 12:29 PM
> > Subject: Re: [avr-gcc-list] power on mega 103
> >
> >
> > > As "nurdin" <address@hidden> wrote:
> > >
> > > >it is said that the power is not connected. beside two
> > > >pair vcc-gnd, should i connect avcc and agnd in programming mode?
> > >
> > > Of course, otherwise you risk the device to break.
> > >
> > > However, I somehow don't think that's your actual problem.
> > > --
> > > J"org Wunsch Unix support engineer
> > > address@hidden
> > http://www.interface-systems.de/~j/
> > >
> > >
> >
> >
> >
> > _______________________________________________
> > avr-gcc-list mailing list
> > address@hidden
> > http://www.avr1.org/mailman/listinfo/avr-gcc-list
> >
> > --
> > This message has been scanned for viruses and
> > dangerous content by MailScanner, and is
> > believed to be clean.
> > MailScanner thanks transtec Computers for their support.
>
- Re: [avr-gcc-list] fdevopen() uses calloc?, (continued)
- Re: [avr-gcc-list] fdevopen() uses calloc?, E. Weddington, 2004/01/21
- Re: [avr-gcc-list] fdevopen() uses calloc?, J.C. Wren, 2004/01/21
- Re: [avr-gcc-list] fdevopen() uses calloc?, Joerg Wunsch, 2004/01/21
- Re: [avr-gcc-list] fdevopen() uses calloc?, Rod Moffitt, 2004/01/22
- Re: [avr-gcc-list] Why no pgm_read_long() / pgm_read_long_far()?, E. Weddington, 2004/01/21
Re: [avr-gcc-list] power on mega 103, nurdin, 2004/01/23
Re: [avr-gcc-list] power on mega 103, Peter Bosscha, 2004/01/23
Re: [avr-gcc-list] power on mega 103, nurdin, 2004/01/23
Re: [avr-gcc-list] power on mega 103,
nurdin <=
Re: [avr-gcc-list] power on mega 103, nurdin, 2004/01/24
- [avr-gcc-list] local labels in gcc assembler, Michal Vanka, 2004/01/25
- RE: [avr-gcc-list] local labels in gcc assembler, Marc Wetzel, 2004/01/25
- Re: [avr-gcc-list] local labels in gcc assembler, Bruce D. Lightner, 2004/01/25
- Message not available
- Re: [avr-gcc-list] local labels in gcc assembler, Clemens Buchacher, 2004/01/29
- Re: [avr-gcc-list] local labels in gcc assembler, Erik Christiansen, 2004/01/29
- Re: [avr-gcc-list] local labels in gcc assembler, Clemens Buchacher, 2004/01/30