[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH 4/6] target/mips: MXU: Add handlers for logic in
From: |
Stefan Markovic |
Subject: |
Re: [Qemu-devel] [PATCH 4/6] target/mips: MXU: Add handlers for logic instructions |
Date: |
Tue, 18 Dec 2018 14:39:48 +0000 |
On 17.12.18. 21:04, Aleksandar Markovic wrote:
> From: Aleksandar Markovic <address@hidden>
>
> Add translation handlers for logic MXU instructions.
>
> Signed-off-by: Aleksandar Markovic <address@hidden>
> ---
> target/mips/translate.c | 182 +++++++++++++++++++++++++++++++++++++---
> 1 file changed, 170 insertions(+), 12 deletions(-)
Reviewed-by: Stefan Markovic <address@hidden>
> diff --git a/target/mips/translate.c b/target/mips/translate.c
> index e3a5a73e59..c74a831a17 100644
> --- a/target/mips/translate.c
> +++ b/target/mips/translate.c
> @@ -24649,6 +24649,172 @@ static void gen_mxu_s32ldd_s32lddr(DisasContext
> *ctx)
> }
>
>
> +/*
> + * MXU instruction category: logic
> + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> + *
> + * S32NOR S32AND S32OR S32XOR
> + */
> +
> +/*
> + * S32NOR XRa, XRb, XRc
> + * Update XRa with the result of logical bitwise 'nor' operation
> + * applied to the content of XRb and XRc.
> + *
> + * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
> + * +-----------+---------+-----+-------+-------+-------+-----------+
> + * | SPECIAL2 |0 0 0 0 0| opc | XRc | XRb | XRa |MXU__POOL16|
> + * +-----------+---------+-----+-------+-------+-------+-----------+
> + */
> +static void gen_mxu_S32NOR(DisasContext *ctx)
> +{
> + uint32_t pad, XRc, XRb, XRa;
> +
> + pad = extract32(ctx->opcode, 21, 5);
> + XRc = extract32(ctx->opcode, 14, 4);
> + XRb = extract32(ctx->opcode, 10, 4);
> + XRa = extract32(ctx->opcode, 6, 4);
> +
> + if (unlikely(pad != 0)) {
> + /* opcode padding incorrect -> do nothing */
> + } else if (unlikely(XRa == 0)) {
> + /* destination is zero register -> do nothing */
> + } else if (unlikely((XRb == 0) && (XRc == 0))) {
> + /* both operands zero registers -> just set destination to all 1s */
> + tcg_gen_movi_i32(mxu_gpr[XRa - 1], 0xFFFFFFFF);
> + } else if (unlikely(XRb == 0)) {
> + /* XRb zero register -> just set destination to the negation of XRc
> */
> + tcg_gen_not_i32(mxu_gpr[XRa - 1], mxu_gpr[XRc - 1]);
> + } else if (unlikely(XRc == 0)) {
> + /* XRa zero register -> just set destination to the negation of XRb
> */
> + tcg_gen_not_i32(mxu_gpr[XRa - 1], mxu_gpr[XRb - 1]);
> + } else if (unlikely(XRb == XRc)) {
> + /* both operands same -> just set destination to the negation of XRb
> */
> + tcg_gen_not_i32(mxu_gpr[XRa - 1], mxu_gpr[XRb - 1]);
> + } else {
> + /* the most general case */
> + tcg_gen_nor_i32(mxu_gpr[XRa - 1], mxu_gpr[XRb - 1], mxu_gpr[XRc -
> 1]);
> + }
> +}
> +
> +/*
> + * S32AND XRa, XRb, XRc
> + * Update XRa with the result of logical bitwise 'and' operation
> + * applied to the content of XRb and XRc.
> + *
> + * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
> + * +-----------+---------+-----+-------+-------+-------+-----------+
> + * | SPECIAL2 |0 0 0 0 0| opc | XRc | XRb | XRa |MXU__POOL16|
> + * +-----------+---------+-----+-------+-------+-------+-----------+
> + */
> +static void gen_mxu_S32AND(DisasContext *ctx)
> +{
> + uint32_t pad, XRc, XRb, XRa;
> +
> + pad = extract32(ctx->opcode, 21, 5);
> + XRc = extract32(ctx->opcode, 14, 4);
> + XRb = extract32(ctx->opcode, 10, 4);
> + XRa = extract32(ctx->opcode, 6, 4);
> +
> + if (unlikely(pad != 0)) {
> + /* opcode padding incorrect -> do nothing */
> + } else if (unlikely(XRa == 0)) {
> + /* destination is zero register -> do nothing */
> + } else if (unlikely((XRb == 0) || (XRc == 0))) {
> + /* one of operands zero register -> just set destination to all 0s */
> + tcg_gen_movi_i32(mxu_gpr[XRa - 1], 0);
> + } else if (unlikely(XRb == XRc)) {
> + /* both operands same -> just set destination to one of them */
> + tcg_gen_mov_i32(mxu_gpr[XRa - 1], mxu_gpr[XRb - 1]);
> + } else {
> + /* the most general case */
> + tcg_gen_and_i32(mxu_gpr[XRa - 1], mxu_gpr[XRb - 1], mxu_gpr[XRc -
> 1]);
> + }
> +}
> +
> +/*
> + * S32OR XRa, XRb, XRc
> + * Update XRa with the result of logical bitwise 'or' operation
> + * applied to the content of XRb and XRc.
> + *
> + * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
> + * +-----------+---------+-----+-------+-------+-------+-----------+
> + * | SPECIAL2 |0 0 0 0 0| opc | XRc | XRb | XRa |MXU__POOL16|
> + * +-----------+---------+--+--+-------+-------+-------+-----------+
> + */
> +static void gen_mxu_S32OR(DisasContext *ctx)
> +{
> + uint32_t pad, XRc, XRb, XRa;
> +
> + pad = extract32(ctx->opcode, 21, 5);
> + XRc = extract32(ctx->opcode, 14, 4);
> + XRb = extract32(ctx->opcode, 10, 4);
> + XRa = extract32(ctx->opcode, 6, 4);
> +
> + if (unlikely(pad != 0)) {
> + /* opcode padding incorrect -> do nothing */
> + } else if (unlikely(XRa == 0)) {
> + /* destination is zero register -> do nothing */
> + } else if (unlikely((XRb == 0) && (XRc == 0))) {
> + /* both operands zero registers -> just set destination to all 0s */
> + tcg_gen_movi_i32(mxu_gpr[XRa - 1], 0);
> + } else if (unlikely(XRb == 0)) {
> + /* XRb zero register -> just set destination to the content of XRc */
> + tcg_gen_mov_i32(mxu_gpr[XRa - 1], mxu_gpr[XRc - 1]);
> + } else if (unlikely(XRc == 0)) {
> + /* XRc zero register -> just set destination to the content of XRb */
> + tcg_gen_mov_i32(mxu_gpr[XRa - 1], mxu_gpr[XRb - 1]);
> + } else if (unlikely(XRb == XRc)) {
> + /* both operands same -> just set destination to the content of XRb
> */
> + tcg_gen_mov_i32(mxu_gpr[XRa - 1], mxu_gpr[XRb - 1]);
> + } else {
> + /* the most general case */
> + tcg_gen_or_i32(mxu_gpr[XRa - 1], mxu_gpr[XRb - 1], mxu_gpr[XRc - 1]);
> + }
> +}
> +
> +/*
> + * S32XOR XRa, XRb, XRc
> + * Update XRa with the result of logical bitwise 'xor' operation
> + * applied to the content of XRb and XRc.
> + *
> + * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
> + * +-----------+---------+-----+-------+-------+-------+-----------+
> + * | SPECIAL2 |0 0 0 0 0| opc | XRc | XRb | XRa |MXU__POOL16|
> + * +-----------+---------+-----+-------+-------+-------+-----------+
> + */
> +static void gen_mxu_S32XOR(DisasContext *ctx)
> +{
> + uint32_t pad, XRc, XRb, XRa;
> +
> + pad = extract32(ctx->opcode, 21, 5);
> + XRc = extract32(ctx->opcode, 14, 4);
> + XRb = extract32(ctx->opcode, 10, 4);
> + XRa = extract32(ctx->opcode, 6, 4);
> +
> + if (unlikely(pad != 0)) {
> + /* opcode padding incorrect -> do nothing */
> + } else if (unlikely(XRa == 0)) {
> + /* destination is zero register -> do nothing */
> + } else if (unlikely((XRb == 0) && (XRc == 0))) {
> + /* both operands zero registers -> just set destination to all 0s */
> + tcg_gen_movi_i32(mxu_gpr[XRa - 1], 0);
> + } else if (unlikely(XRb == 0)) {
> + /* XRb zero register -> just set destination to the content of XRc */
> + tcg_gen_mov_i32(mxu_gpr[XRa - 1], mxu_gpr[XRc - 1]);
> + } else if (unlikely(XRc == 0)) {
> + /* XRc zero register -> just set destination to the content of XRb */
> + tcg_gen_mov_i32(mxu_gpr[XRa - 1], mxu_gpr[XRb - 1]);
> + } else if (unlikely(XRb == XRc)) {
> + /* both operands same -> just set destination to all 0s */
> + tcg_gen_movi_i32(mxu_gpr[XRa - 1], 0);
> + } else {
> + /* the most general case */
> + tcg_gen_xor_i32(mxu_gpr[XRa - 1], mxu_gpr[XRb - 1], mxu_gpr[XRc -
> 1]);
> + }
> +}
> +
> +
> /*
> * Decoding engine for MXU
> * =======================
> @@ -25334,24 +25500,16 @@ static void decode_opc_mxu__pool16(CPUMIPSState
> *env, DisasContext *ctx)
> generate_exception_end(ctx, EXCP_RI);
> break;
> case OPC_MXU_S32NOR:
> - /* TODO: Implement emulation of S32NOR instruction. */
> - MIPS_INVAL("OPC_MXU_S32NOR");
> - generate_exception_end(ctx, EXCP_RI);
> + gen_mxu_S32NOR(ctx);
> break;
> case OPC_MXU_S32AND:
> - /* TODO: Implement emulation of S32AND instruction. */
> - MIPS_INVAL("OPC_MXU_S32AND");
> - generate_exception_end(ctx, EXCP_RI);
> + gen_mxu_S32AND(ctx);
> break;
> case OPC_MXU_S32OR:
> - /* TODO: Implement emulation of S32OR instruction. */
> - MIPS_INVAL("OPC_MXU_S32OR");
> - generate_exception_end(ctx, EXCP_RI);
> + gen_mxu_S32OR(ctx);
> break;
> case OPC_MXU_S32XOR:
> - /* TODO: Implement emulation of S32XOR instruction. */
> - MIPS_INVAL("OPC_MXU_S32XOR");
> - generate_exception_end(ctx, EXCP_RI);
> + gen_mxu_S32XOR(ctx);
> break;
> case OPC_MXU_S32LUI:
> /* TODO: Implement emulation of S32LUI instruction. */
- [Qemu-devel] [PATCH 0/6] target/mips: Amend MXU support, Aleksandar Markovic, 2018/12/17
- [Qemu-devel] [PATCH 3/6] target/mips: MXU: Improve textual description, Aleksandar Markovic, 2018/12/17
- [Qemu-devel] [PATCH 6/6] target/mips: MXU: Add handlers for an align instruction, Aleksandar Markovic, 2018/12/17
- [Qemu-devel] [PATCH 4/6] target/mips: MXU: Add handlers for logic instructions, Aleksandar Markovic, 2018/12/17
- Re: [Qemu-devel] [PATCH 4/6] target/mips: MXU: Add handlers for logic instructions,
Stefan Markovic <=
- [Qemu-devel] [PATCH 2/6] target/mips: MXU: Add generic naming for optn2 constants, Aleksandar Markovic, 2018/12/17
- [Qemu-devel] [PATCH 1/6] target/mips: MXU: Add missing opcodes/decoding for LX* instructions, Aleksandar Markovic, 2018/12/17
- Re: [Qemu-devel] [PATCH 1/6] target/mips: MXU: Add missing opcodes/decoding for LX* instructions, Stefan Markovic, 2018/12/18
- Re: [Qemu-devel] [PATCH 1/6] target/mips: MXU: Add missing opcodes/decoding for LX* instructions, Janeczek, Craig, 2018/12/27
- Re: [Qemu-devel] [PATCH 1/6] target/mips: MXU: Add missing opcodes/decoding for LX* instructions, Aleksandar Markovic, 2018/12/27
- Re: [Qemu-devel] [PATCH 1/6] target/mips: MXU: Add missing opcodes/decoding for LX* instructions, Janeczek, Craig, 2018/12/27
- Re: [Qemu-devel] [PATCH 1/6] target/mips: MXU: Add missing opcodes/decoding for LX* instructions, Aleksandar Markovic, 2018/12/27
- Re: [Qemu-devel] [PATCH 1/6] target/mips: MXU: Add missing opcodes/decoding for LX* instructions, Janeczek, Craig, 2018/12/27
- Re: [Qemu-devel] [PATCH 1/6] target/mips: MXU: Add missing opcodes/decoding for LX* instructions, Aleksandar Markovic, 2018/12/27
[Qemu-devel] [PATCH 5/6] target/mips: MXU: Add handlers for max/min instructions, Aleksandar Markovic, 2018/12/17