|
From: | Felix Ruess |
Subject: | Re: [Paparazzi-devel] Tiltrotor-Project |
Date: | Tue, 7 Jun 2016 20:37:12 +0200 |
Hello everyone,
I did not write for a long time but the project moves on.
I checked the orientation of the IMU and everything is fine. The Engines
spin in the right direction and the ATTITUDE_DIRECT Mode does work as well.
So everything seems fine so far.
The only problem is with the yaw command. It seems a bit slow i comparison
with the roll and pitch command.
In the code motor_mixing.c I found the following lines:
************************************************************************************
/* first calculate the highest priority part of the command:
* - add trim + roll + pitch + thrust for each motor
* - calc max saturation/overflow when yaw command is also added
*/
for (i = 0; i < MOTOR_MIXING_NB_MOTOR; i++) {
motor_mixing.commands[i] = motor_mixing.trim[i] +
motor_mixing.roll_coef[i] * in_cmd[COMMAND_ROLL] +
motor_mixing.pitch_coef[i] * in_cmd[COMMAND_PITCH] +
motor_mixing.thrust_coef[i] * in_cmd[COMMAND_THRUST];
***********************************************************************************
The Yaw command is not added directly to the output. First they calculate
saturation and overflow. I do not really understand why this is done. I do
also not understand the Code which is following these lines. Can anyone
please explain to me what the saturation and overflow calculation prevent?
And will I have a quicker respond to my YAW reaction if I add
"+motor_mixing.yaw_coef[i]*in_cmd[COMMAND_YAW]" to the top line and
uncomment all the other ones behind this peace of code?
Already thanks for the help,
notoriou5
--
View this message in context: http://lists.paparazziuav.org/Tiltrotor-Project-tp17906p18047.html
Sent from the paparazzi-devel mailing list archive at Nabble.com.
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
[Prev in Thread] | Current Thread | [Next in Thread] |