AW: AW: AW: [Paparazzi-devel] GCS problems

[Roman Nikitin]

Hi everyone, 

finally I had got my system working yesterday and today in the morning.
After I done some adjustments for IRs and proved it, it was working correct.
After I decided to make a brake and came back to do further work on my
autopilot, I just powered the system and have not changed anything more and
now it does not work. I mean Data link, Server and GCS lines are running
without errors but I cannot see the map and command buttons at all. It is
mysticism. 

Yesterday I had the same problem. One time it worked, another time not. But
yesterday I just repowered the system and the problem gone. Today such trick
does not work. 

Have somebody some problems? Or may be exist some order I need to follow for
the system start and shut off. For example I do it as follows: I connect the
modem first, then power the ap board, and after that make execute. To turn
off the system I do as follows: stop all running processes in GCS,
disconnect the power from ap board and finally disconnect the modem usb
connection. And it worked yesterday and today in the morning.

I did it couple of times today and after a half an hour brake I cannot get
the system working. Had anybody such problems? If "yes" then what do I do
wrong?

Thank you.

Regards, 

ROman

-----Ursprüngliche Nachricht-----
Von: address@hidden
[mailto:address@hidden Im Auftrag
von Gareth Roberts
Gesendet: Dienstag, 6. Juli 2010 23:17
An: address@hidden
Betreff: Re: AW: AW: [Paparazzi-devel] GCS problems

Do you definitely have bidirectional communication then?  Have you checked
all the hardware connections are 100% between the paparazzi and the xbee?  
Maybe worth checking with a multimeter or something?
--G

On 6 Jul 2010, at 21:38, Roman Nikitin wrote:

> 
> Gareth, 
> 
>> Which session are you launching in GCS?  Flight-USB address@hidden
> Yes, I do. 
> 
>> Are  there no errors in the paparazzi centre?
> No errors. Data link, Server and GCS are running.
> 
>> Have you tried launching the "Messages" tool to see if there is anything
> sporadically coming in?
> Yes, I did. No messages are to see. 
> 
> It is strange, that the light on the modem for "data in" is not blinking
at
> all. But it do blinking when it is connected to the X-CTU. As I can see
the
> modem send the data does not receive any back. 
> 
> Ideas?
> 
> Roman
> 
> -----Ursprüngliche Nachricht-----
> Von: address@hidden
> [mailto:address@hidden Im
Auftrag
> von Gareth Roberts
> Gesendet: Dienstag, 6. Juli 2010 20:51
> An: address@hidden
> Betreff: Re: AW: [Paparazzi-devel] Modem communication problems
> 
> That's a good start.
> Which session are you launching in GCS?  Flight-USB address@hidden
> Are  there no errors in the paparazzi centre?
> Have you tried launching the "Messages" tool to see if there is anything
> sporadically coming in?
> 
> --G
> On 6 Jul 2010, at 20:30, Roman Nikitin wrote:
> 
>> I proved the communication between the modems with help of the X-CTU
>> software. It is definitely working by now. The "data in" led is also
fine.
>> So the problem is somewhere in GCS.
>> 
> 
> 
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel


_______________________________________________
Paparazzi-devel mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/paparazzi-devel