RE: [Dvdrtools-users] Re: creating an iso from bz2 file 3.5 GB ( Solved partially )

[Vijay Kumar]

HI,

a) I could create an iso of greater than 3.5 GB after upgrading to dvdrtools
0.2.1 

b) I am still unable to write it on to a dvd , below is the command which I
gave. : 
   dvdrecord -v -dao dev=0,0,0 speed=4 /root/bin/sh/half_backup.iso  >>   
    root/bin/sh/half_backup.log 2>&1

This gave the following error : 

scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.24
dvdrecord: Warning: using inofficial version of libscg (bero-0.5a
'@(#)scsitransp.c     1.81 01/04/20 Copyright 1988,1995,2000 J. Schilling').
dvdrtools v0.2.1
...........
Based on:
Cdrecord 1.11a15 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
TOC Type: 1 = CD-ROM
Using libscg version 'bero-0.5a'
atapi: 1
Device type    : Removable CD-ROM
Version        : 2
Response Format: 2
Capabilities   :
Vendor_info    : 'SONY    '
Identifikation : 'DVD RW DRU-510A '
Revision       : '1.0c'
Device seems to be: Generic mmc2 DVD.
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags   : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 4718592 = 4608 KB
FIFO size      : 4194304 = 4096 KB
Track 01: data  1831 MB
Total size:     2103 MB (208:23.89) = 937792 sectors
Lout start:     2103 MB (208:25/67) = 937792 sectors
Current Secsize: 2048
  ATIP start of lead in:  -150 (00:00/00)
Disk type:    unknown dye (reserved id code)
Manuf. index: -1
Manufacturer: unknown (not in table)
Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 1360704

Waiting for reader process to fill input buffer ... input buffer ready.
trackno=0
BURN-Free is ON.
Performing OPC...
Sending CUE sheet...
Starting new track at sector: 937958
@01T001831
dvdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB:  2A 00 00 0E 4F E6 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 12 00 00 00 00 2C 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x2C Qual 0x00 (command sequence error) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.002s timeout 200s
Sense Bytes: 70 00 00 00 00 00 00 12 00 00 00 00 00 00 00 00 00 00

write track data: error after 0 bytes
Writing  time:   10.793s
Fixating...
Fixating time:    0.002s
dvdrecord: fifo had 64 puts and 1 gets.
dvdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.


Nothing is written on the dvd and I am unable to poin to anyspecific error. 
I have changed the dvd and also tried with -udf option, looks like this
option is not available in the new build as of now. ( Maybe I am wrong ) 

Please let me know how can I write this iso of greater than 2 GB ? 

Regards,
Vijay Kumar