[Dvdrtools-users] Can't write with LG DVD-RW drive

[Nico]

Hi,

I have an LG GMA 4020b DVD-RW drive that is reported as DVD-RAM.

I can format my disks, but whenever I run a normal burning session I get 
the following error:

#dvdrecord -v -dev=0,0,0 -speed=1 -dao dvd.iso
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.24
dvdrtools v0.1.3
Portions (c) 2002-2003 Ark Linux <address@hidden>
Based on:
Cdrecord 1.11a15 (i586-ark-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.5'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   :
Vendor_info    : 'HL-DT-ST'
Identifikation : 'DVDRAM GMA-4020B'
Revision       : 'A107'
Device seems to be: Generic mmc2 DVD.
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags   : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1409024 = 1376 KB
FIFO size      : 4194304 = 4096 KB
Track 01: data  104 MB
Total size:     120 MB (11:56.58) = 53744 sectors
Lout start:     120 MB (11:58/44) = 53744 sectors
Current Secsize: 2048
 ATIP start of lead in:  -150 (00:00/00)
Disk type:    unknown
Manuf. index: -1
Manufacturer: unknown (not in table)
Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 2244752
Starting to write CD/DVD at speed 1 in write mode for single session.
Last chance to quit, starting real write in 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
trackno=0
BURN-Free is ON.
Performing OPC...
Sending CUE sheet...
Starting new track at sector: 53910
^MTrack 01:   0 of 104 MB written.dvdrecord: Input/output error. 
write_g1: scsi sendcmd: no error
CDB:  2A 00 00 00 D2 96 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 10 2A 00 00 0D 21 02 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x02 (logical block address out of range) [No 
matching qualifier] Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.003s timeout 200s
Sense Bytes: 70 00 00 00 00 00 00 10 00 00 00 0D 00 00 00 00 00 00

write track data: error after 0 bytes
Writing  time:    5.040s
Fixating...
Fixating time:    0.006s
dvdrecord: fifo had 64 puts and 1 gets.
dvdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.


My kernel is custom a 2.4.20 with ide-scsi and support for scsi cdrom 
and scsi-generic.

How can I solve it?  
Thanks very much,
                       Nico