[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Dvdrtools-users] using nec nd1100a
From: |
Jason Moxham |
Subject: |
[Dvdrtools-users] using nec nd1100a |
Date: |
Sat, 3 May 2003 16:32:22 +0100 |
User-agent: |
KMail/1.5.1 |
using a nec nd1100a dvd+rw/+r rewriter I can write/rewrite and blank cd's but
when it comes to doing the same operations for dvd's I get the following
errors
System is linux slackware 9.0 , with ricoh dvd+rw disk
Trying to blank a dvd+rw
address@hidden:~# dvdrecord -v dev=0,0,0 blank=fast
dvdrtools v0.1.4
Portions (c) 2002-2003 Ark Linux <address@hidden>
Based on:
Cdrecord 1.11a15 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.24
Using libscg version 'bero-0.5a'
dvdrecord: Warning: using inofficial version of libscg (bero-0.5a
'@(#)scsitransp.c 1.81 01/04/20 Copyright 1988,1995,2000 J. Schilling').
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : '_NEC '
Identifikation : 'DVD+RW ND-1100A '
Revision : '1.A0'
Device seems to be: Generic mmc2 DVD-ROM.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
Drive buf size : 1605632 = 1568 KB
Current Secsize: 2048
ATIP start of lead in: -150 (00:00/00)
Disk type: unknown dye (reserved id code)
Manuf. index: -1
Manufacturer: unknown (not in table)
Starting to write CD/DVD at speed 4 in write mode for single session.
Last chance to quit, starting real write in 0 seconds. Operation starts.
Performing OPC...
Blanking PMA, TOC, pregap
dvdrecord: Input/output error. blank unit: scsi sendcmd: no error
CDB: A1 01 00 00 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 30 05 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.001s timeout 9600s
dvdrecord: Cannot blank disk, aborting.
address@hidden:~#
what does this mean ? , and how do I correct it ?
trying to write an iso on a dvd+rw
address@hidden:~# dvdrecord -v dev=0,0,0 /cd.iso
dvdrtools v0.1.4
Portions (c) 2002-2003 Ark Linux <address@hidden>
Based on:
Cdrecord 1.11a15 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.24
Using libscg version 'bero-0.5a'
dvdrecord: Warning: using inofficial version of libscg (bero-0.5a
'@(#)scsitransp.c 1.81 01/04/20 Copyright 1988,1995,2000 J. Schilling').
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : '_NEC '
Identifikation : 'DVD+RW ND-1100A '
Revision : '1.A0'
Device seems to be: Generic mmc2 DVD-ROM.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
Drive buf size : 1605632 = 1568 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 701 MB
Total size: 805 MB (79:46.80) = 359010 sectors
Lout start: 805 MB (79:48/60) = 359010 sectors
Current Secsize: 2048
Trying to clear drive status.
dvdrecord: Drive needs to reload the media to return to proper status.
ATIP start of lead in: -150 (00:00/00)
Disk type: unknown dye (reserved id code)
Manuf. index: -1
Manufacturer: unknown (not in table)
dvdrecord: WARNING: Data may not fit on standard 74min disk.
Starting to write CD/DVD at speed 4 in write mode for single session.
Last chance to quit, starting real write in 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is OFF.
Performing OPC...
dvdrecord: Input/output error. read track info: scsi sendcmd: no error
CDB: 52 01 00 00 00 FF 00 00 1C 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 C0
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
Sense flags: Blk 0 (not valid) error refers to command part, bit ptr 0 (not
valid) field ptr 0
cmd finished after 0.089s timeout 240s
Writing time: 8.406s
Fixating...
Fixating time: 0.001s
dvdrecord: fifo had 64 puts and 0 gets.
dvdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
address@hidden:~#
again what does this mean , and how do I correct it ?
Thanks
Jason Moxham
address@hidden
- [Dvdrtools-users] using nec nd1100a,
Jason Moxham <=