[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
aliasing with X310 BasicRX (higher order Nyquist zone) ?
From: |
address@hidden |
Subject: |
aliasing with X310 BasicRX (higher order Nyquist zone) ? |
Date: |
Mon, 20 Jul 2020 11:37:05 +0000 |
I'd like to analyze a higher Nyquist zone with a X310 fitted with a BasicRX:
trying to listen at 143.5 MHz (GRAVES), I can transpose by 100 MHz but am still
far from the ~8 MS/s sampling I can use on the Gb Ethernet interface. Since the
signal is only in the third Nyquist zone, I'd like to tell the BasicRX/DDC *not*
to anti-alias (CIC filter ?) the received signal. It tried playing with the
Bandwidth parameter of the USRP Sink but no improvement there.
Is there a way to alias on purpose the signal with X310+BasicRX ?
Thanks, JM
--
JM Friedt, FEMTO-ST Time & Frequency/SENSeOR, 26 rue de l'Epitaphe,
25000 Besancon, France
- Home Radio Astronomy Installation Guide, Glen Langston, 2020/07/05
- Message not available
- aliasing with X310 BasicRX (higher order Nyquist zone) ?,
address@hidden <=
- Re: aliasing with X310 BasicRX (higher order Nyquist zone) ?, Marcus D. Leech, 2020/07/20
- Re: aliasing with X310 BasicRX (higher order Nyquist zone) ?, address@hidden, 2020/07/20
- Re: aliasing with X310 BasicRX (higher order Nyquist zone) ?, Marcus D. Leech, 2020/07/20
- Re: aliasing with X310 BasicRX (higher order Nyquist zone) ?, Brian Padalino, 2020/07/20
- Re: aliasing with X310 BasicRX (higher order Nyquist zone) ?, Marcus D. Leech, 2020/07/20
- Re: aliasing with X310 BasicRX (higher order Nyquist zone) ?, address@hidden, 2020/07/20
- Re: aliasing with X310 BasicRX (higher order Nyquist zone) ?, Marcus D. Leech, 2020/07/20