|
From: | Sid Boyce |
Subject: | Re: R: Again on FCDPROPLUS |
Date: | Tue, 28 Apr 2020 12:23:40 +0100 |
User-agent: | Mozilla/5.0 (X11; Linux x86_64; rv:68.0) Gecko/20100101 Thunderbird/68.7.0 |
sudo cp -v ~/Desktop/enzo/99-usb-serial.rules /etc/udev/rules.d/ 73 ... Sid. On 28/04/2020 09:53, Vincenzo Mone wrote:
Hello Barry, Thanks also to you for the help, but the problem is everyone is trying to help me Saying what to do as I know how Linux works. Unfortunately I am a beginner user and do not know anything about Linux. Just starting and following all you suggestions but the problem is I do not understand What to do if some says for example start as administrator as how I saw it is different from windows O.S. BTW I have tried how you suggested me but it did not work maybe because how I said before Did not do correctly the commands. Here is what I've done: I have opened the Terminal and typed gedit which is the editor. Pasted the 4 lines. Closed the file saving it in Enzo which is the folder I see on the Desktop Always in the terminal I have typed: sudo cp -v ~/Desktop/enzo/99-usb-serial.rules but after have inserted the requested password I got the error: cp: missing destination file operand after '/home/enzo/Desktop/enzo/99-usb-serial.rules' Where am I still missing? Finally you said to be sure to set the Device name; mine is "hw:CARD=V20,DEV=0" How to know the Device name? I can just say that it is a Funcube Dongle Pro Plus. Thanks to you and to everyone and please apologise if I am bothering somebody 73 de Enzo IK8OZV EasyLog 5 BetaTester EasyLog PDA BetaTester WinBollet BetaTester D.C.I. CheckPoint Regione Campania Skype: ik8ozv8520 ********************************* ****** GSM +39 328 7110193 ****** ***** SMS +39 328 7110193 ***** *********************************-----Messaggio originale----- Da: Barry Duggan <address@hidden> Inviato: martedì 28 aprile 2020 01:48 A: address@hidden Cc: Discuss Gnuradio <address@hidden> Oggetto: Re: Again on FCDPROPLUS Vincenzo, Here is what you need to do to set up udev rules: In any of your folders (<your folder>), create a file named '99-usb- serial.rules' with the following content: SUBSYSTEMS=="usb" ATTRS{idVendor}=="04d8" ATTRS{idProduct}=="fb31" MODE:="0666" Save the file. Then, in a Terminal screen: cd /etc/udev/rules.d sudo cp -v ~/<your folder>/99-usb-serial.rules . # note the period! sudo udevadm trigger Be sure to set the Device name; mine is "hw:CARD=V20,DEV=0" (without the quotes). If that doesn't work, follow the procedure in https://wiki.gnuradio.org/index.php/Audio_Source#Device_Name starting with "For Linux ALSA users...". Let me know how it works for you. -- Barry Duggan KV4FV On Sun, 26 Apr 2020 18:29:17 +0200, Vincenzo Mone wrote: Hello, Please I have a doubt. Reading on the FCDPROPLUS site I read: Important Don't forget the udev rules: For instance: Udev rules for the Funcube Dongle Pro (0xfb56) and Pro+ (0xfb31) HIDAPI/libusb: SUBSYSTEMS=="usb" ATTRS{idVendor}=="04d8" ATTRS{idProduct}=="fb56" MODE:="0666" SUBSYSTEMS=="usb" ATTRS{idVendor}=="04d8" ATTRS{idProduct}=="fb31" MODE:="0666" HIDAPI/hidraw: KERNEL=="hidraw*", ATTRS{busnum}=="1", ATTRS{idVendor}=="04d8", ATTRS{idProduct}=="fb56", MODE="0666" KERNEL=="hidraw*", ATTRS{busnum}=="1", ATTRS{idVendor}=="04d8", ATTRS{idProduct}=="fb31", MODE="0666 Please what does it means? Maybe I am missing something. Any help? Thanks 73 de Enzo IK8OZV EasyLog 5 BetaTester EasyLog PDA BetaTester WinBollet BetaTester D.C.I. CheckPoint Regione Campania Skype: ik8ozv8520
-- Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support Senior Staff Specialist, Cricket Coach Microsoft Windows Free Zone - Linux used for all Computing Tasks
[Prev in Thread] | Current Thread | [Next in Thread] |