[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
R: Again on FCDPROPLUS
From: |
Vincenzo Mone |
Subject: |
R: Again on FCDPROPLUS |
Date: |
Tue, 28 Apr 2020 10:53:58 +0200 |
Hello Barry,
Thanks also to you for the help, but the problem is everyone is trying to
help me
Saying what to do as I know how Linux works.
Unfortunately I am a beginner user and do not know anything about Linux.
Just starting and following all you suggestions but the problem is I do not
understand
What to do if some says for example start as administrator as how I saw it
is different from windows O.S.
BTW I have tried how you suggested me but it did not work maybe because how
I said before
Did not do correctly the commands.
Here is what I've done:
I have opened the Terminal and typed gedit which is the editor.
Pasted the 4 lines.
Closed the file saving it in Enzo which is the folder I see on the Desktop
Always in the terminal I have typed:
sudo cp -v ~/Desktop/enzo/99-usb-serial.rules
but after have inserted the requested password I got the error:
cp: missing destination file operand after
'/home/enzo/Desktop/enzo/99-usb-serial.rules'
Where am I still missing?
Finally you said to be sure to set the Device name; mine is
"hw:CARD=V20,DEV=0"
How to know the Device name?
I can just say that it is a Funcube Dongle Pro Plus.
Thanks to you and to everyone and please apologise if I am bothering
somebody
73 de Enzo IK8OZV
EasyLog 5 BetaTester
EasyLog PDA BetaTester
WinBollet BetaTester
D.C.I. CheckPoint Regione Campania
Skype: ik8ozv8520
*********************************
****** GSM +39 328 7110193 ******
***** SMS +39 328 7110193 *****
*********************************
> -----Messaggio originale-----
> Da: Barry Duggan <address@hidden>
> Inviato: martedì 28 aprile 2020 01:48
> A: address@hidden
> Cc: Discuss Gnuradio <address@hidden>
> Oggetto: Re: Again on FCDPROPLUS
>
> Vincenzo,
>
> Here is what you need to do to set up udev rules:
>
> In any of your folders (<your folder>), create a file named '99-usb-
> serial.rules' with the following content:
>
> SUBSYSTEMS=="usb" ATTRS{idVendor}=="04d8" ATTRS{idProduct}=="fb31"
> MODE:="0666"
>
> Save the file. Then, in a Terminal screen:
>
> cd /etc/udev/rules.d
> sudo cp -v ~/<your folder>/99-usb-serial.rules . # note the
> period!
> sudo udevadm trigger
>
> Be sure to set the Device name; mine is "hw:CARD=V20,DEV=0" (without the
> quotes). If that doesn't work, follow the procedure in
> https://wiki.gnuradio.org/index.php/Audio_Source#Device_Name starting
> with "For Linux ALSA users...".
>
> Let me know how it works for you.
> --
> Barry Duggan KV4FV
>
> On Sun, 26 Apr 2020 18:29:17 +0200, Vincenzo Mone wrote:
>
> Hello,
>
> Please I have a doubt.
>
> Reading on the FCDPROPLUS site I read:
>
> Important
> Don't forget the udev rules: For instance:
>
> Udev rules for the Funcube Dongle Pro (0xfb56) and Pro+ (0xfb31)
>
> HIDAPI/libusb:
>
> SUBSYSTEMS=="usb" ATTRS{idVendor}=="04d8" ATTRS{idProduct}=="fb56"
> MODE:="0666" SUBSYSTEMS=="usb" ATTRS{idVendor}=="04d8"
> ATTRS{idProduct}=="fb31" MODE:="0666"
>
> HIDAPI/hidraw:
>
> KERNEL=="hidraw*", ATTRS{busnum}=="1", ATTRS{idVendor}=="04d8",
> ATTRS{idProduct}=="fb56", MODE="0666" KERNEL=="hidraw*",
> ATTRS{busnum}=="1", ATTRS{idVendor}=="04d8",
> ATTRS{idProduct}=="fb31",
> MODE="0666
>
> Please what does it means?
>
> Maybe I am missing something.
>
> Any help?
>
> Thanks
>
> 73 de Enzo IK8OZV
> EasyLog 5 BetaTester
> EasyLog PDA BetaTester
> WinBollet BetaTester
> D.C.I. CheckPoint Regione Campania
> Skype: ik8ozv8520