----- Original Message -----
From: "Nick Foster" <address@hidden>
To: "Gabriel Morel" <address@hidden>
Sent: Tuesday, January 04, 2011 1:48 PM
Subject: Re: [Discuss-gnuradio] Need help in emergency for the fpga image
>I asked you a bunch of questions you didn't answer the last time you
> posted. I can't help you unless you give me more details. Can you
> answer
> these questions for me?
>
> 1. Are you planning on using the older raw socket interface or UHD to
> communicate with your USRP2?
I use the raw ethernet version.
> 2. Are you using the original SD card that came with your USRP2?
yes I'm using a SD card that came with my USRP2
> 3. Does re-loading the original downloaded FPGA bin image onto the same
> SD card make it work for you?
Yes
> 4. What specific firmware file (including full file name) are you
> loading onto the SD card?
I'm using the WBX daughter board with the fpga bin file
u2_rev3-20100603.bin
and the firmware
txrx_wbx_raw_eth_20100608.bin
It is working when both file are loaded together
> 5. Are you using "make bin" or "make -f Makefile.udp bin" to compile
> your image?
No, I created a project with the FPGA xc3s200fg456-5 in ISE 12.1 and
I
added all the files of all differents
makefile of all folder of the principal makefile in
fpga/usrp2/top/u2_rev3. I implemented the top module and I
generated the programming file by double clicking on the command in
the
design tab.
> 6. Are you using the master branch or the ise12 branch of the Git
> repository?
I think i used the master branch. I downloaded all the files in
repository fpga.git and used the u2_rev3.v top in fpga/usrp2/top/u2_rev3.
> --n
>
> On Tue, 2011-01-04 at 13:29 -0500, Gabriel Morel wrote:
>> Hello everyone, I must find a way to compile the FPGA project for the
>> USRP2 to continue my Masters. I use ISE 12.1
>> and the top project u2_rev3 in
>> the repository git://ettus.sourcerepo.com/ettus/fpga.git using all
>> the files in different makefile.
>> The compilation works well and I get the bin file of 842Kb. But during
>> the test, only one of the lights glow
>> and the computer does not see the radio. Is there someone who
>> can reproduce this bug and help me find
>> an answer?
>>
>> Gabriel
>> _______________________________________________
>> Discuss-gnuradio mailing list
>> address@hidden
>> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>
>
_______________________________________________
Discuss-gnuradio mailing list
address@hidden
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio