[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Need help in emergency for the fpga image
From: |
Gabriel Morel |
Subject: |
Re: [Discuss-gnuradio] Need help in emergency for the fpga image |
Date: |
Wed, 05 Jan 2011 14:32:58 -0500 |
----- Original Message -----
From: "Nick Foster" <address@hidden>
To: "Gabriel Morel" <address@hidden>
Sent: Tuesday, January 04, 2011 1:48 PM
Subject: Re: [Discuss-gnuradio] Need help in emergency for the fpga image
I asked you a bunch of questions you didn't answer the last time you
posted. I can't help you unless you give me more details. Can you answer
these questions for me?
1. Are you planning on using the older raw socket interface or UHD to
communicate with your USRP2?
I use the raw ethernet version.
2. Are you using the original SD card that came with your USRP2?
yes I'm using a SD card that came with my USRP2
3. Does re-loading the original downloaded FPGA bin image onto the same
SD card make it work for you?
Yes
4. What specific firmware file (including full file name) are you
loading onto the SD card?
I'm using the WBX daughter board with the fpga bin file
u2_rev3-20100603.bin
and the firmware
txrx_wbx_raw_eth_20100608.bin
It is working when both file are loaded together
5. Are you using "make bin" or "make -f Makefile.udp bin" to compile
your image?
No, I created a project with the FPGA xc3s200fg456-5 in ISE 12.1 and I
added all the files of all differents
makefile of all folder of the principal makefile in
fpga/usrp2/top/u2_rev3. I implemented the top module and I
generated the programming file by double clicking on the command in the
design tab.
6. Are you using the master branch or the ise12 branch of the Git
repository?
I think i used the master branch. I downloaded all the files in
repository fpga.git and used the u2_rev3.v top in fpga/usrp2/top/u2_rev3.
--n
On Tue, 2011-01-04 at 13:29 -0500, Gabriel Morel wrote:
Hello everyone, I must find a way to compile the FPGA project for the
USRP2 to continue my Masters. I use ISE 12.1
and the top project u2_rev3 in
the repository git://ettus.sourcerepo.com/ettus/fpga.git using all
the files in different makefile.
The compilation works well and I get the bin file of 842Kb. But during
the test, only one of the lights glow
and the computer does not see the radio. Is there someone who
can reproduce this bug and help me find
an answer?
Gabriel
_______________________________________________
Discuss-gnuradio mailing list
address@hidden
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
- [Discuss-gnuradio] Need help in emergency for the fpga image, Gabriel Morel, 2011/01/04
- Re: [Discuss-gnuradio] Need help in emergency for the fpga image, Matthias Wilhelm, 2011/01/05
- Message not available
- Re: [Discuss-gnuradio] Need help in emergency for the fpga image,
Gabriel Morel <=
- Re: [Discuss-gnuradio] Need help in emergency for the fpga image, Nick Foster, 2011/01/05
- Re: [Discuss-gnuradio] Need help in emergency for the fpga image, Gabriel Morel, 2011/01/05
- Re: [Discuss-gnuradio] Need help in emergency for the fpga image, Josh Blum, 2011/01/05
- Re: [Discuss-gnuradio] Need help in emergency for the fpga image, Josh Blum, 2011/01/05
- Re: [Discuss-gnuradio] Need help in emergency for the fpga image, Gabriel Morel, 2011/01/05
- Re: [Discuss-gnuradio] Need help in emergency for the fpga image, Gabriel Morel, 2011/01/12