Hi,
I have received two new USRP2 (rev 4) with a BasicRx DB. I connect the DB,
set the gbit lan so that :
eth1 Link encap:Ethernet HWaddr 00:15:17:e6:86:56
inet addr:192.168.10.1 Bcast:192.168.10.255 Mask:255.255.255.0
inet6 addr: fe80::215:17ff:fee6:8656/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:190 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:27244 (27.2 KB)
Memory:f3000000-f3020000
I connect the USRP2 to the GBIT lan port and try:
ping 192.168.10.2
PING 192.168.10.2 (192.168.10.2) 56(84) bytes of data.
From 192.168.10.1 icmp_seq=2 Destination Host Unreachable
From 192.168.10.1 icmp_seq=3 Destination Host Unreachable
From 192.168.10.1 icmp_seq=4 Destination Host Unreachable
am I missing something ?
(I have also builded UHD and tried uhd_find_devices...result: No UHD Devices
Found )
Any suggestions ?? (same behaviours on both uspr2)
thanks in advance Luca
_______________________________________________
Discuss-gnuradio mailing list
address@hidden
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio