[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Beagleboard
From: |
Philip Balister |
Subject: |
Re: [Discuss-gnuradio] Beagleboard |
Date: |
Fri, 1 Aug 2008 13:40:08 -0400 |
On Fri, Aug 1, 2008 at 12:04 PM, Eric Cottrell <address@hidden> wrote:
> Hello,
>
> There was some interest on this list earlier about the Beagleboard, a small
> OMAP3 based board. I just got one from Digi-key and it is small!
> http://beagleboard.org/
>
> Besides the GNURadio aspects this may be a good board for ham radio digital
> modem applications like the old TI DSP Evaluation Board that TAPR used.
We have built gnu radio for the beagle board and simple stuff (dial
tone) does work (for some sw builds).
My list of gnu radio + beagle things to do:
1) Get ASoC sound working.
2) Work out USB sound configuration until 1.
3) Need to use libusb-0.1x. USRP transfer speed test works, but kernel
dumps when closing usb interface.
4) figure out how to run make check. Currently, individual tests run
with manual intervention.
5) Develop and test a NEON filter implementation.
Installing GNU Radio, install the Angstrom images, type "opkg install
gnuradio" :) If you have any questions I am on irc.freenode.net in
#beagle and #gnuradio.
Philip
- [Discuss-gnuradio] Beagleboard, Eric Cottrell, 2008/08/01
- Re: [Discuss-gnuradio] Beagleboard,
Philip Balister <=
- Re: [Discuss-gnuradio] Beagleboard, Eric Brombaugh, 2008/08/01
- Re: [Discuss-gnuradio] Beagleboard, Philip Balister, 2008/08/01
- Re: [Discuss-gnuradio] Beagleboard, Eric Brombaugh, 2008/08/01
- Re: [Discuss-gnuradio] Beagleboard, Philip Balister, 2008/08/02
- Re: [Discuss-gnuradio] Beagleboard, Eric A. Cottrell, 2008/08/03
- Re: [Discuss-gnuradio] Beagleboard, Nikhil Adnani, 2008/08/04
- Re: [Discuss-gnuradio] Beagleboard, Philip Balister, 2008/08/05