[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Auto T/R Switching with Inband code
From: |
Ketan Mandke |
Subject: |
Re: [Discuss-gnuradio] Auto T/R Switching with Inband code |
Date: |
Fri, 18 Jul 2008 17:26:58 -0500 |
After doing some further testing, it seems that using
"inband_2rxhb_2tx.rbf" allowed us to properly do automatic t/r
switching (even with the use of just one channel). We could not get
this functionality working correctly with "inband_1rxhb_1tx.rbf".
Maybe this rbf was not rebuilt after applying whatever fixes George
was referring to? Anyway, thanks a lot for your help.
On Thu, Jul 17, 2008 at 3:45 PM, George Nychis <address@hidden> wrote:
>
>
> Ketan Mandke wrote:
>>
>> Eric & George,
>>
>> Thanks for quick responses. I also wanted to verify that I am using
>> the correct rbf. Since I am only using a single transmit/receive
>> channel, I have been using "inband_1rxhb_1tx.rbf". Is this ok, or
>> should I be using "inband_2rxhb_2tx.rbf"?
>>
>
> No problem.
>
> inband_1rxhb_1tx.rbf is the correct RBF for a single TX/RX chain. The RFX
> follows the same naming conventions as the standard firmwares.
>
> - George
>
--
Ketan Mandke