[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Auto T/R Switching with Inband code
From: |
Ketan Mandke |
Subject: |
Re: [Discuss-gnuradio] Auto T/R Switching with Inband code |
Date: |
Thu, 17 Jul 2008 15:42:31 -0500 |
Eric & George,
Thanks for quick responses. I also wanted to verify that I am using
the correct rbf. Since I am only using a single transmit/receive
channel, I have been using "inband_1rxhb_1tx.rbf". Is this ok, or
should I be using "inband_2rxhb_2tx.rbf"?
On Thu, Jul 17, 2008 at 3:32 PM, George Nychis <address@hidden> wrote:
>
>
> Eric Blossom wrote:
>
>> Hi Ketan!
>>
>> I can't think of any reason that auto t/r shouldn't work with the
>> inband code... unless some control signal that it needs wasn't
>> connected to the master_control module in the inband case.
>>
>
> Hi Ketan,
>
> I'm not sure which RBF you're using from us. I'd suggest the latest one in
> the trunk. Older ones we had made some modifications to master control.
> But the latest, we did not touch it at all, so there is no chance this
> might happen.
>
> - George
>
--
Ketan Mandke