|
From: | Clark Pope |
Subject: | RE: [Discuss-gnuradio] How to get ready for the USRP2 |
Date: | Wed, 16 Jan 2008 09:42:17 -0500 |
Does the Webpack ISE work or is a full ISE install required? Thanks, Clark > Date: Tue, 15 Jan 2008 16:38:36 -0800 > From: address@hidden > To: address@hidden > Subject: [Discuss-gnuradio] How to get ready for the USRP2 > > > > For those who plan to get a USRP2 when they are ready, here are some > steps you can do to make sure you and your computer are ready. > > 1 Make sure your computer has Gigabit ethernet, preferably built into > the mainboard or on the PCI Express bus. If your primary network > connection is that same ethernet port, you may want to get an additional > PCI Express Gigabit ethernet board. > > > 2 Get and/or build Microblaze-gcc cross compilers from here: > > http://www.petalogix.com/news_events/petalinux_public_release > > > 3 If you plan to do your own FPGA development, download and install > the latest ISE tools from Xilinx. If you have trouble, here are some tips: > > http://gnuradio.org/trac/wiki/ISEonFC6 > > > 4 Again, if you plan to do your own FPGA development, download and > install Icarus Verilog and GTKWave. You will need a recent snapshot of > both. > > > 5 Check out the USRP2 repository > > svn co http://gnuradio.org/svn/usrp2/trunk usrp2 > > 6 Explore the code. > > Matt > > > > _______________________________________________ > Discuss-gnuradio mailing list > address@hidden > http://lists.gnu.org/mailman/listinfo/discuss-gnuradio Watch “Cause Effect,” a show about real people making a real difference. Learn more |
[Prev in Thread] | Current Thread | [Next in Thread] |