[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH v4 19/45] Get rid of RNG200 timer
From: |
Peter Maydell |
Subject: |
Re: [PATCH v4 19/45] Get rid of RNG200 timer |
Date: |
Mon, 15 Jan 2024 14:33:06 +0000 |
On Fri, 8 Dec 2023 at 02:34, Sergey Kambalin <serg.oker@gmail.com> wrote:
>
> Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
The commit message doesn't seem to match the changes here.
> ---
> hw/arm/bcm2838_peripherals.c | 14 +++++
> hw/arm/raspi4b.c | 1 -
> hw/misc/bcm2838_rng200.c | 78 ++++++++++++++++------------
> include/hw/arm/bcm2838_peripherals.h | 2 +
> include/hw/misc/bcm2838_rng200.h | 4 +-
> 5 files changed, 63 insertions(+), 36 deletions(-)
>
> diff --git a/hw/arm/bcm2838_peripherals.c b/hw/arm/bcm2838_peripherals.c
> index ee06214715..7c489c8e8a 100644
> --- a/hw/arm/bcm2838_peripherals.c
> +++ b/hw/arm/bcm2838_peripherals.c
> @@ -34,6 +34,9 @@ static void bcm2838_peripherals_init(Object *obj)
> bc->peri_low_size);
> sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->peri_low_mr);
>
> + /* Random Number Generator */
> + object_initialize_child(obj, "rng200", &s->rng200, TYPE_BCM2838_RNG200);
> +
> /* PCIe Host Bridge */
> object_initialize_child(obj, "pcie-host", &s->pcie_host,
> TYPE_BCM2838_PCIE_HOST);
> @@ -85,6 +88,17 @@ static void bcm2838_peripherals_realize(DeviceState *dev,
> Error **errp)
> BCM2838_VC_PERI_LOW_BASE,
> &s->peri_low_mr_alias, 1);
>
> + /* Random Number Generator */
> + if (!sysbus_realize(SYS_BUS_DEVICE(&s->rng200), errp)) {
> + return;
> + }
> + memory_region_add_subregion(
> + &s_base->peri_mr, RNG_OFFSET,
> + sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->rng200), 0));
> + sysbus_connect_irq(SYS_BUS_DEVICE(&s->rng200), 0,
> + qdev_get_gpio_in_named(DEVICE(&s_base->ic), BCM2835_IC_GPU_IRQ,
> + INTERRUPT_RNG));
> +
> /* Extended Mass Media Controller 2 */
> object_property_set_uint(OBJECT(&s->emmc2), "sd-spec-version", 3,
> &error_abort);
> diff --git a/hw/arm/raspi4b.c b/hw/arm/raspi4b.c
> index 2e8474e1c5..7b5385b8dd 100644
> --- a/hw/arm/raspi4b.c
> +++ b/hw/arm/raspi4b.c
> @@ -67,7 +67,6 @@ static void raspi4_modify_dtb(const struct arm_boot_info
> *info, void *fdt)
>
> /* Temporarily disable following devices until they are implemented*/
> const char *to_be_removed_from_dt_as_wa[] = {
> - "brcm,bcm2711-rng200",
> "brcm,bcm2711-thermal",
> "brcm,bcm2711-genet-v5",
> };
These changes above here are all "add the rng200 device to the SoC".
They shouldn't be in the same patch as changes below which seem
to be adding/changing functionality in the device implementation.
I think the changes below (other than the change to
include/hw/arm/bcm2838_peripherals.h) should be in the previous patch(es).
> diff --git a/hw/misc/bcm2838_rng200.c b/hw/misc/bcm2838_rng200.c
> index f91ea0754c..1b334b94d5 100644
> --- a/hw/misc/bcm2838_rng200.c
> +++ b/hw/misc/bcm2838_rng200.c
> @@ -9,6 +9,7 @@
>
> #include "qemu/osdep.h"
> #include "qemu/log.h"
> +#include "qom/object_interfaces.h"
> #include "qapi/error.h"
> #include "hw/qdev-properties.h"
> #include "hw/misc/bcm2838_rng200.h"
> @@ -64,10 +65,7 @@ static const VMStateDescription vmstate_bcm2838_rng200 = {
> .version_id = 1,
> .minimum_version_id = 1,
> .fields = (VMStateField[]) {
> - VMSTATE_UINT32(rbg_period, BCM2838Rng200State),
> VMSTATE_UINT32(rng_fifo_cap, BCM2838Rng200State),
> - VMSTATE_BOOL(use_timer, BCM2838Rng200State),
> -
> VMSTATE_ARRAY(regs, BCM2838Rng200State, N_BCM2838_RNG200_REGS, 0,
> vmstate_info_uint32, uint32_t),
>
thanks
-- PMM
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- Re: [PATCH v4 19/45] Get rid of RNG200 timer,
Peter Maydell <=