qemu-arm
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PULL 03/19] hw/sensor: Add IC_DEVICE_ID to ISL voltage regulators


From: Cédric Le Goater
Subject: [PULL 03/19] hw/sensor: Add IC_DEVICE_ID to ISL voltage regulators
Date: Wed, 13 Jul 2022 09:52:39 +0200

From: Peter Delevoryas <pdel@fb.com>

This commit adds a passthrough for PMBUS_IC_DEVICE_ID to allow Renesas
voltage regulators to return the integrated circuit device ID if they
would like to.

The behavior is very device specific, so it hasn't been added to the
general PMBUS model. Additionally, if the device ID hasn't been set,
then the voltage regulator will respond with the error byte value.  The
guest error message will change slightly for IC_DEVICE_ID with this
commit.

Signed-off-by: Peter Delevoryas <pdel@fb.com>
Reviewed-by: Titus Rwantare <titusr@google.com>
Message-Id: <20220701000626.77395-3-me@pjd.dev>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
---
 include/hw/sensor/isl_pmbus_vr.h |  5 +++++
 hw/sensor/isl_pmbus_vr.c         | 12 ++++++++++++
 2 files changed, 17 insertions(+)

diff --git a/include/hw/sensor/isl_pmbus_vr.h b/include/hw/sensor/isl_pmbus_vr.h
index 3e47ff7e48d8..aa2c2767df90 100644
--- a/include/hw/sensor/isl_pmbus_vr.h
+++ b/include/hw/sensor/isl_pmbus_vr.h
@@ -12,12 +12,17 @@
 #include "hw/i2c/pmbus_device.h"
 #include "qom/object.h"
 
+#define TYPE_ISL69259   "isl69259"
 #define TYPE_ISL69260   "isl69260"
 #define TYPE_RAA228000  "raa228000"
 #define TYPE_RAA229004  "raa229004"
+#define ISL_MAX_IC_DEVICE_ID_LEN 16
 
 struct ISLState {
     PMBusDevice parent;
+
+    uint8_t ic_device_id[ISL_MAX_IC_DEVICE_ID_LEN];
+    uint8_t ic_device_id_len;
 };
 
 OBJECT_DECLARE_SIMPLE_TYPE(ISLState, ISL69260)
diff --git a/hw/sensor/isl_pmbus_vr.c b/hw/sensor/isl_pmbus_vr.c
index e11e0288840d..799ea9d89edb 100644
--- a/hw/sensor/isl_pmbus_vr.c
+++ b/hw/sensor/isl_pmbus_vr.c
@@ -15,6 +15,18 @@
 
 static uint8_t isl_pmbus_vr_read_byte(PMBusDevice *pmdev)
 {
+    ISLState *s = ISL69260(pmdev);
+
+    switch (pmdev->code) {
+    case PMBUS_IC_DEVICE_ID:
+        if (!s->ic_device_id_len) {
+            break;
+        }
+        pmbus_send(pmdev, s->ic_device_id, s->ic_device_id_len);
+        pmbus_idle(pmdev);
+        return 0;
+    }
+
     qemu_log_mask(LOG_GUEST_ERROR,
                   "%s: reading from unsupported register: 0x%02x\n",
                   __func__, pmdev->code);
-- 
2.35.3




reply via email to

[Prev in Thread] Current Thread [Next in Thread]