qemu-arm
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PATCH 06/16] hw/arm/xlnx-zcu102: Don't enable PSCI conduit when booting


From: Peter Maydell
Subject: [PATCH 06/16] hw/arm/xlnx-zcu102: Don't enable PSCI conduit when booting guest in EL3
Date: Thu, 27 Jan 2022 15:46:29 +0000

Change the Xilinx ZynqMP-based board xlnx-zcu102 to use the new
boot.c functionality to allow us to enable psci-conduit only if
the guest is being booted in EL1 or EL2, so that if the user runs
guest EL3 firmware code our PSCI emulation doesn't get in its
way.

To do this we stop setting the psci-conduit property on the CPU
objects in the SoC code, and instead set the psci_conduit field in
the arm_boot_info struct to tell the common boot loader code that
we'd like PSCI if the guest is starting at an EL that it makes
sense with.

Note that this means that EL3 guest code will have no way
to power on secondary cores, because we don't model any
kind of power controller that does that on this SoC.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
Again, if anybody knows the real-hardware EL3 behaviour for
CPUs that would be great.
---
 hw/arm/xlnx-zcu102.c |  1 +
 hw/arm/xlnx-zynqmp.c | 13 ++++++++-----
 2 files changed, 9 insertions(+), 5 deletions(-)

diff --git a/hw/arm/xlnx-zcu102.c b/hw/arm/xlnx-zcu102.c
index 45eb19ab3b7..4c84bb932aa 100644
--- a/hw/arm/xlnx-zcu102.c
+++ b/hw/arm/xlnx-zcu102.c
@@ -236,6 +236,7 @@ static void xlnx_zcu102_init(MachineState *machine)
     s->binfo.ram_size = ram_size;
     s->binfo.loader_start = 0;
     s->binfo.modify_dtb = zcu102_modify_dtb;
+    s->binfo.psci_conduit = QEMU_PSCI_CONDUIT_SMC;
     arm_load_kernel(s->soc.boot_cpu_ptr, machine, &s->binfo);
 }
 
diff --git a/hw/arm/xlnx-zynqmp.c b/hw/arm/xlnx-zynqmp.c
index 1c52a575aad..17305fe7b76 100644
--- a/hw/arm/xlnx-zynqmp.c
+++ b/hw/arm/xlnx-zynqmp.c
@@ -215,7 +215,10 @@ static void xlnx_zynqmp_create_rpu(MachineState *ms, 
XlnxZynqMPState *s,
 
         name = object_get_canonical_path_component(OBJECT(&s->rpu_cpu[i]));
         if (strcmp(name, boot_cpu)) {
-            /* Secondary CPUs start in PSCI powered-down state */
+            /*
+             * Secondary CPUs start in powered-down state.
+             * TODO: check this is what EL3 firmware expects.
+             */
             object_property_set_bool(OBJECT(&s->rpu_cpu[i]),
                                      "start-powered-off", true, &error_abort);
         } else {
@@ -435,12 +438,12 @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error 
**errp)
     for (i = 0; i < num_apus; i++) {
         const char *name;
 
-        object_property_set_int(OBJECT(&s->apu_cpu[i]), "psci-conduit",
-                                QEMU_PSCI_CONDUIT_SMC, &error_abort);
-
         name = object_get_canonical_path_component(OBJECT(&s->apu_cpu[i]));
         if (strcmp(name, boot_cpu)) {
-            /* Secondary CPUs start in PSCI powered-down state */
+            /*
+             * Secondary CPUs start in powered-down state.
+             * TODO: check this is what EL3 firmware expects.
+             */
             object_property_set_bool(OBJECT(&s->apu_cpu[i]),
                                      "start-powered-off", true, &error_abort);
         } else {
-- 
2.25.1




reply via email to

[Prev in Thread] Current Thread [Next in Thread]