|
From: | Jean-Christophe DUBOIS |
Subject: | Re: Qemu and ARM secure state. |
Date: | Tue, 9 Nov 2021 20:06:35 +0100 |
User-agent: | Mozilla/5.0 (X11; Linux x86_64; rv:91.0) Gecko/20100101 Thunderbird/91.1.2 |
On Mon, 8 Nov 2021 at 22:09, Jean-Christophe DUBOIS <jcd@tribudubois.net> wrote:OK, so one problem seems to be that PSCI-via-SMC is enabled on i.MX6UL when there is no built in PSCI related function on this processor. According the Linux DTS, i.MX7 (solo and dual) processors have a somewhat PSCI related "entry-method" (https://github.com/torvalds/linux/blob/master/arch/arm/boot/dts/imx7s.dtsi). But it is not clear to me how this is used and this seems a bit strange as "entry-method" seems to be mostly used on arm64 and there is no other PSCI related information in the i.MX7 DTS files.Yeah, PSCI was an interface introduced mostly with aarch64. In the 32-bit world bringing up multiple CPUs was complete anarchy -- the way the kernel told the secure firmware that it should start up a secondary core was entirely determined by the firmware, and the kernel had to have board-specific code to do this. (For the 32-bit imx boards I think this is in arch/arm/mach-imx/src.c.) For aarch64 we had a clean slate and took the opportunity to insist that all boards did it the same way, ie using PSCI. (There are other useful things PSCI allows, but standardising secondary boot is the one that matters for this discussion.) So if a platform's firmware implements PSCI, all the dts file has to do is say so, and then there's no need for board-specific "start secondary CPUs" code. PSCI does define an aarch32 interface, but there are a lot of legacy older boards (and new flavours of boards in long-standing design families) which still do things the old way in aarch32 land. Typically the top-level "PSCI is available" node is added by the firmware. (QEMU will do this too when it's emulating PSCI firmware) -- if the board code enables the psci-conduit it will add an appropriate psci node in the hw/arm/boot.c code.)As a matter of fact previous quad or dual i.MX6 were not supporting PSCI. Instead they were using a proprietary method through the internal SRC device (and i.MX7 also has a similar internal SRC device). But let's assume Linux on i.mx7 is actually using PSCI to handle processors. Thinking about it, I guess this might be u-boot that sets an EL3 monitor software that is able to handle PSCI requests for the Linux kernel. If this is the case, it make sense that Qemu emulates the PSCI services normally provided by u-boot to be able to boot linux directly (without booting a real u-boot prior to linux). All is well and nice.Yes, that's the way it works. The EL3 firmware is supposed to provide PSCI. For aarch64 the kernel is never entered in EL3 -- it will always run at EL2 or EL1. (This is unlike aarch32, where in some cases you might run the kernel in secure-SVC, although even there starting the kernel in NS-SVC or NS-Hyp is more common.)But then if I want to boot and test the u-boot binary (or any trusted OS for the matter) on a Qemu emulated i.MX7 (to later boot an hypervisor or an OS), it would be rather strange that any PSCI related service requested by the hypervisor/OS would be handled by Qemu directly and not by the u-boot code (or any other EL3 code) running on the processor.Exactly. This is why the board code is supposed to set things up so that if we are starting the guest code in EL1 or EL2 then we enable the PSCI-via-SMC support, and if we're starting the guest code in EL3 then we do not.How is it supposed to work? How can I tell Qemu (dynamically?) if I want it to provide (or not) the PSCI services (and more generally SMC/HVC services).If you want PSCI via SMC or HVC, then set the psci-conduit property on the CPUs to QEMU_PSCI_CONDUIT_SMC or QEMU_PSCI_CONDUIT_HVC. If you do not want QEMU to provide PSCI, then leave psci-conduit at its default (which is QEMU_PSCI_CONDUIT_DISABLED). How can I tell it that I want to handle all SMC/EL3 servicesby myself even if the "psci-conduit" is already set to SMC in Qemu?It's the imx7 code that's setting psci-conduit, so it should not do that if it doesn't want that (and also should either start or not start the secondary cpus powered off, depending on what the hardware-to-firmware interface is supposed to be.) This is a bit awkward, because the boards we initially wanted PSCI for (notably virt) don't have an SoC object, so the code creating CPUs is in the same source file as the code that knows whether it's booting a kernel directly or not, and so it just open-codes the decision logic. With the imx, the CPU creation is in the source code for the SoC object which is abstracted away from the board model code. So we'd need to sort out how to plumb that information into the SoC object (or have the SoC object's code that creates the CPUs call some function to find out).
Thanks Peter,
So basically the Qemu i.MX7 processor code needs to set psci-conduit to SMC because we want to be able to boot the Linux kernel directly (without u-boot) with Qemu emulating the PSCI services when an SMC instruction is triggered.
As I see it we also need a way to disable this Qemu PSCI emulation in case we want to boot an EL3 software (u-boot, optee or other).
We could certainly pass a command line option to explicitly tell
Qemu to disable the PCSI emulation. But this would be a bit
cumbersome as the board level code would then need to call to the
SOC code to disable the psci setting on all cores.
So I am wondering if we could be more "clever" solution and have things sorted out automatically. I would like to suggest 2 solutions;
Is any of these proposals reasonable in your point of view? This would apply for any (ARM) target and this seems generic enough.
Thanks
JC
-- PMM
[Prev in Thread] | Current Thread | [Next in Thread] |