Re: [Linphone-users] Strange problem with new linphone

[Simon Morlat]

Hi,

You can use 
nat_address=<ip address of tun0>
firewall_policy=1
or configure the "network" tab of the configuration window directly.
This will force linphone to use the specified network address in SIP and SDP 
messages.


Simon

Le Monday 18 February 2008 18:25:12 kionez, vous avez écrit :
> Hi all, i'm trying to debug a strange behaviour in newest linphone
> releases..
> I have to reach a sip-proxy connected by VPN (so, i have tun0 as network
> device), I can register to sip-proxy (openser), but i can't recieve
> anything.. neither messages nor calls.
>
> I compare many tcpdump and it seems that newest linphone simply ignores
> "contact=" field in config file, using the default ip on eth0, that's
> because in debian stable version, 1.5.1 it use my "contact=" field and i
> can recieve calls and messages..
>
> Here's my tests with debian packages:
>
>  linphone-1.5.1 (debian stable) --> OK
>  linphone-2.0.1 (debian unstable) --> NO
>
> And then i try to build from source:
>
>  linphone-2.0.1 - libosip2-3.0.3 - libeXosip2-3.0.3-3 ---> NO
>  linphone-2.1.1 - libosip2-3.0.3 - libeXosip2-3.0.3-3 ---> NO
>  linphone-2.1.1 - libosip2-3.1.0 - libeXosip2-3.1.0 ---> NO
>
>
> Does someone can help me? I think is a "contact=" problem.. because is
> the only thing i noticed in dumps.
>
> thanks in advance
>
> k.
>
>
> _______________________________________________
> Linphone-users mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/linphone-users