Re: [Linphone-users] Compilation without speex

[Simon Morlat]

Hello,

I've never seen this bug. Looks like a libtool bug.
Try with another version of libtool and run ./autogen.sh within linphone's 
source to update build scripts.

Simon

Le Jeudi 20 Octobre 2005 07:57, Kushal Dalal a écrit :
> Hello,
>
> Dont consider previous one, actually it shows this error at the
> installation time.
>
> ''''''''''''''''''''''''''''''''''''''''''''''''''
> make[1]: Leaving directory
> `/home/kushaldalal/docs/SIP/linphone/new/linphone-1.1.0/exosip'
> Making install in coreapi
> make[1]: Entering directory
> `/home/kushaldalal/docs/SIP/linphone/new/linphone-1.1.0/coreapi'
> make[2]: Entering directory
> `/home/kushaldalal/docs/SIP/linphone/new/linphone-1.1.0/coreapi'
> test -z "/usr/lib" || mkdir -p -- . "/armbuild/usr/lib"
>  /bin/sh ../libtool --mode=install /usr/bin/install -c  'liblinphone.la'
> '/armbuild/usr/lib/liblinphone.la'
> libtool: install: warning: relinking `liblinphone.la'
> (cd /home/kushaldalal/docs/SIP/linphone/new/linphone-1.1.0/coreapi;
> /bin/sh ../libtool  --mode=relink armv4l-unknown-linux-gcc -Wall -Werror
> -DENABLE_TRACE -DG_LOG_DOMAIN="LinphoneCore" -DINET6 -D_ORTP_SOURCE -02
> -fno-exceptions -I../support -o liblinphone.la -rpath /usr/lib
> -version-info 2:0:1 linphonecore.lo exevents.lo misc.lo arts.lo enum.lo
> sdphandler.lo presence.lo proxy.lo friend.lo authentication.lo
> lpconfig.lo chat.lo ../mediastreamer/libmediastreamer.la
> ../exosip/libeXosip.la -ldl -inst-prefix-dir /armbuild)
> mv: can't stat source liblinphone.so.1.1.0
> libtool: install: error: relink `liblinphone.la' with the above command
> before installing it
> make[2]: *** [install-libLTLIBRARIES] Error 1
> make[2]: Leaving directory
> `/home/kushaldalal/docs/SIP/linphone/new/linphone-1.1.0/coreapi'
> make[1]: *** [install-am] Error 2
> make[1]: Leaving directory
> `/home/kushaldalal/docs/SIP/linphone/new/linphone-1.1.0/coreapi'
> make: *** [install-recursive] Error 1
> '''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
>''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
>''''''''''''''''''
>
> Kushal Dalal
> Embedded Engineer
> eInfochips Limited.
> Email: address@hidden
>
> Kushal Dalal wrote:
> > Hello,
> >
> > Thanks again. It solved my compilation problem.
> > But at time of installation it shows following error.
> >
> > '''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
> >'''''''''''''''''''''''''''' Making all in console
> > make[2]: Entering directory
> > `/home/kushaldalal/docs/SIP/linphone/new/linphone-1.1.0/console'
> > /bin/sh ../libtool --mode=link armv4l-unknown-linux-gcc -Wall -Werror
> > -DENABLE_TRACE -D_ORTP_SOURCE  -O2 -fno-exceptions -I../support
> > ../oRTP/src/libortp.la -L/armbuild/usr/lib -lspeex -lm
> > -L/armbuild/usr/lib -losipparser2 -losip2  -o linphonec  linphonec.o
> > commands.o ../coreapi/liblinphone.la -ldl
> > armv4l-unknown-linux-gcc -Wall -Werror -DENABLE_TRACE -D_ORTP_SOURCE
> > -O2 -fno-exceptions -I../support -o .libs/linphonec linphonec.o
> > commands.o  ../oRTP/src/.libs/libortp.so -L/armbuild/usr/lib -lspeex
> > -lm -losipparser2 -losip2 ../coreapi/.libs/liblinphone.so -ldl
> > armv4l-unknown-linux-gcc: ../coreapi/.libs/liblinphone.so: No such
> > file or directory
> > make[2]: *** [linphonec] Error 1
> > make[2]: Leaving directory
> > `/home/kushaldalal/docs/SIP/linphone/new/linphone-1.1.0/console'
> > make[1]: *** [all-recursive] Error 1
> > make[1]: Leaving directory
> > `/home/kushaldalal/docs/SIP/linphone/new/linphone-1.1.0'
> > make: *** [all] Error 2
> > '''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
> >''''''''''''''''''''''''''''''''''''''''' please help me to solve it.
> >
> > Thanks
> > -Kushal
> >
> >Kushal Dalal
> >Embedded Engineer
> >eInfochips Limited.
> >Email: address@hidden
> >
> > Simon Morlat wrote:
> >>I think I already see that with arm-gcc-2.95: just turn off optimisation
> >>(remove -02 in the gsmlib/Makefile) and it works.
> >>
> >>Simon
> >>
> >>Le Mercredi 19 Octobre 2005 13:28, Kushal Dalal a écrit :
> >>>Hello,
> >>>
> >>>Thanks. I am able to compile Speex-1.0.5 with my toolchain.
> >>>Previously I was trying Speex-1.1.6. It's ok as it is enough.
> >>>Now while compiling linphone as mentioned in README.arm,
> >>>it gives following error.
> >>>I have pasted that part..
> >>>
> >>>""""""""""""""""""
> >>>source='code.c' object='code.lo' libtool=yes \
> >>>depfile='.deps/code.Plo' tmpdepfile='.deps/code.TPlo' \
> >>>depmode=gcc /bin/sh ../depcomp \
> >>>/bin/sh ../libtool --mode=compile armv4l-unknown-linux-gcc
> >>>-DHAVE_CONFIG_H -I. -I. -I..   -O2 -fno-exceptions -w -O2
> >>>-fno-exceptions -I../support -c -o code.lo code.c
> >>> armv4l-unknown-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -O2
> >>>-fno-exceptions -w -O2 -fno-exceptions -I../support -c code.c
> >>>-Wp,-MD,.deps/code.TPlo  -fPIC -DPIC -o .libs/code.o
> >>>/tmp/ccM7d2bX.s: Assembler messages:
> >>>/tmp/ccM7d2bX.s:96: Error: Can not represent OFFSET_IMM8 relocation in
> >>>this object file format (1)
> >>>/tmp/ccM7d2bX.s:98: Error: Can not represent OFFSET_IMM8 relocation in
> >>>this object file format (1)
> >>>make: *** [code.lo] Error 1
> >>>"""""""""""""""""""""""""""""""""""""""""""""
> >>>Can I compile without GSM codec as I don't need it?
> >>>Or how to solve above problem?
> >>>
> >>>Thanks in advance.
> >>>-Kushal
> >>>
> >>>Kushal Dalal
> >>>Embedded Engineer
> >>>eInfochips Limited.
> >>>Email: address@hidden
> >>>
> >>>Simon Morlat wrote:
> >>>>Hello,
> >>>>
> >>>>The speex dependency is mandatory.
> >>>>However it is quite easy to cross compile speex on arm:
> >>>>
> >>>>taken from my README.arm in linphone's tree:
> >>>>
> >>>>Cross compiling speex for ARM:
> >>>>********************************
> >>>>First you need to remove ogg headers from your build system to avoid a
> >>>>dirty conflict between
> >>>>your build machine binaries and the arm binaries. They are usually in a
> >>>>libogg-dev package (rpm or deb).
> >>>>Then:
> >>>>./configure --prefix=/usr --host=arm-linux --with-gnu-ld
> >>>> --disable-static --enable-fixed-point --enable-arm-asm
> >>>>make
> >>>>make install DESTDIR=$ARM_INSTALL_TREE
> >>>>make install DESTDIR='pwd'/armbuild
> >>>>
> >>>>Simon
> >>>>
> >>>>Le Mardi 18 Octobre 2005 15:17, Kushal Dalal a écrit :
> >>>>>Hello,
> >>>>>
> >>>>>I am cross compiling linphonec-1.1.0  for ARM - MIZI Embedded Linux
> >>>>>platform.(for Samsung S3C2410 board.)
> >>>>>I am using cross compilaton tool chain by MIZI.
> >>>>>I would like to remove speex depedancy for the package.
> >>>>>I tried "--with-speex=no" and "--without-speex" while running
> >>>>> configure script.
> >>>>>But it is not working. I think there is a bug in that script at speex
> >>>>>part. What could be the solution?
> >>>>>Even I am not able to cross compile Speex with my tool chain !!..
> >>>>>
> >>>>>Thanks in advance.
> >>>>>
> >>>>>-Kushal Dalal
> >>>>
> >>>>Disclaimer: This e-mail and any attachment is for authorized use by the
> >>>>intended recipients only. It may contain proprietary material,
> >>>>confidential information and/or be subject to legal privilege of
> >>>>eInfochips Ltd. If you have received this message in error, please
> >>>> notify the originator immediately. If you are not the intended
> >>>> recipient, you are notified that you are strictly Prohibited from
> >>>> retaining, using, copying, altering or disclosing the contents of this
> >>>> message.
> >>
> >>Disclaimer: This e-mail and any attachment is for authorized use by the
> >> intended recipients only. It may contain proprietary material,
> >> confidential information and/or be subject to legal privilege of
> >> eInfochips Ltd. If you have received this message in error, please
> >> notify the originator immediately. If you are not the intended
> >> recipient, you are notified that you are strictly Prohibited from
> >> retaining, using, copying, altering or disclosing the contents of this
> >> message.