RE: [Linphone-users] URGENT help

[Karthikeyan S]

Hi,

Thanx for ur directions again. However i made sure more than once for
choosing lo as the interface. Still i get the same crash. Following is the
debug report as u asked for-


Script started on Thu Jun 13 09:58:28 2002
 ]0;address@hidden: /home/ngnsip/address@hidden Linphone]# ls
gdb linphone
GNU gdb 5.0rh-5 Red Hat Linux 7.1
Copyright 2001 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain
conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB.  Type "show warranty" for details.
This GDB was configured as "i386-redhat-linux"...
(gdb) r
Starting program: /usr/local/bin/linphone
[New Thread 1024 (LWP 29940)]
L3 -1023942529- <osipua.c: 59> info: Starting osip stack and osipua layer.
[New Thread 2049 (LWP 29941)]
Delayed SIGSTOP caught for LWP 29941.
[New Thread 1026 (LWP 29942)]
Delayed SIGSTOP caught for LWP 29942.
L4 -1023942529- <udp.c: 75> info: Entering osipua thread.
Found 2 interfaces.
Found eth0 interface with ip address 10.4.7.241

GnomeUI-WARNING **: Could not open help topics file NULL
Adding <sip:address@hidden> to the list of alias.
Added payload type 3 3 gsm/8000/1
Added payload type 115 115 lpc10-15/8000/1
Added payload type 8 8 pcma/8000/1
Added payload type 0 0 pcmu/8000/1
Acceptable blocksize for query (2048) is 2048
 dsp opened.
SUB_DIVIDE said error=-1,errno=22
SUB_DIVIDE said error=0,errno=22
Warning: dsp block size set to 16384.
blocksize is 16384.
L3 -1023942538- <osipmanager.c: 137> info: port already listened
Added payload type 3 3 gsm/8000/1
Added payload type 115 115 lpc10-15/8000/1
Added payload type 8 8 pcma/8000/1
Added payload type 0 0 pcmu/8000/1
state=0
L3 -1023942558- <sdp_rfc2327.c: 1309> The rfc2327 says there should be at
least an email or a phone header!- anyway, we don't mind about it.
L3 -1023942558- <transaction.c: 34> INFO: allocating transaction ressource 1
189014985
L3 -1023942558- <ict.c: 31> INFO: allocating ICT context
L3 -1023942558- <transaction.c: 209> sipevent evt->transactionid: 1
L3 -1023942558- <transaction.c: 210> sipevent tr->state: 0
L3 -1023942558- <transaction.c: 211> sipevent evt->type: 16
L3 -1023942558- <transaction.c: 212> sipevent evt->sip: 8113468
L2 -1023942558- <udp.c: 192> Sending message:
INVITE sip:address@hidden:5064 SIP/2.0
Via: SIP/2.0/UDP 127.0.0.1:5060
From: <sip:address@hidden>;tag=4ef6f
To: <sip:address@hidden:5064>
Call-ID: address@hidden
CSeq: 1 INVITE
Contact: <sip:address@hidden>
user-agent: oSIP/Linphone-0.8.0
Content-Type: application/sdp
Content-Length: 222

v=0
o=root 123456 654321 IN IP4 127.0.0.1
s=A conversation
c=IN IP4 127.0.0.1
t=0 0
m=audio 7077 RTP/AVP 3 115 8 0
a=rtpmap:3 gsm/8000/1
a=rtpmap:115 lpc10-15/8000/1
a=rtpmap:8 pcma/8000/1
a=rtpmap:0 pcmu/8000/1
L3 -1023942558- <transaction.c: 243> sipevent evt: method called!
invite state=1
L2 -1023942558- <udp.c: 159> info: RECEIVING UDP MESSAGE:
SIP/2.0 100 Trying
via: SIP/2.0/UDP 127.0.0.1:5060
from: sip:address@hidden;tag=4ef6f
to: sip:address@hidden:5064
cseq: 1 INVITE
call-id: address@hidden
user-agent: oSIP/Linphone-0.4.2
content-length: 0


L3 -1023942558- <transaction.c: 209> sipevent evt->transactionid: 1
L3 -1023942558- <transaction.c: 210> sipevent tr->state: 1
L3 -1023942558- <transaction.c: 211> sipevent evt->type: 13
L3 -1023942558- <transaction.c: 212> sipevent evt->sip: 8114470
L1 -1023942558- <ict_callbacks.c: 41> OnEvent_New_Incoming1xxResponse!
L3 -1023942558- <transaction.c: 243> sipevent evt: method called!
L2 -1023942558- <udp.c: 159> info: RECEIVING UDP MESSAGE:
SIP/2.0 180 Ringing
via: SIP/2.0/UDP 127.0.0.1:5060
from: sip:address@hidden;tag=4ef6f
to: sip:address@hidden:5064
cseq: 1 INVITE
call-id: address@hidden
contact: sip:address@hidden:5064
user-agent: oSIP/Linphone-0.4.2
content-length: 0


L3 -1023942558- <transaction.c: 209> sipevent evt->transactionid: 1
L3 -1023942558- <transaction.c: 210> sipevent tr->state: 2
L3 -1023942558- <transaction.c: 211> sipevent evt->type: 13
L3 -1023942558- <transaction.c: 212> sipevent evt->sip: 8112938
L1 -1023942558- <ict_callbacks.c: 41> OnEvent_New_Incoming1xxResponse!
Acceptable blocksize for query (2048) is 2048
 dsp opened.
SUB_DIVIDE said error=-1,errno=22
SUB_DIVIDE said error=0,errno=22
Warning: dsp block size set to 16384.
blocksize is 16384.
[New Thread 2051 (LWP 29944)]
Delayed SIGSTOP caught for LWP 29944.
L3 -1023942558- <transaction.c: 243> sipevent evt: method called!
Acceptable blocksize for query (2048) is 2048
 dsp opened.
SUB_DIVIDE said error=-1,errno=22
SUB_DIVIDE said error=0,errno=22
Warning: dsp block size set to 16384.
blocksize is 16384.
Acceptable blocksize for query (2048) is 2048
 dsp opened.
SUB_DIVIDE said error=-1,errno=22
SUB_DIVIDE said error=0,errno=22
Warning: dsp block size set to 16384.
blocksize is 16384.
L2 -1023942563- <udp.c: 159> info: RECEIVING UDP MESSAGE:
SIP/2.0 200 OK
via: SIP/2.0/UDP 127.0.0.1:5060
from: sip:address@hidden;tag=4ef6f
to: sip:address@hidden:5064
cseq: 1 INVITE
call-id: address@hidden
contact: sip:address@hidden:5064
user-agent: oSIP/Linphone-0.4.2
content-type: application/sdp
content-length: 123

v=0
o=robot 1623146875 1623146875 IN IP4 127.0.0.1
s=A conversation
c=IN IP4 127.0.0.1
t=0 0
m=audio 7071 RTP/AVP 3

L3 -1023942563- <transaction.c: 209> sipevent evt->transactionid: 1
L3 -1023942563- <transaction.c: 210> sipevent tr->state: 2
L3 -1023942563- <transaction.c: 211> sipevent evt->type: 14
L3 -1023942563- <transaction.c: 212> sipevent evt->sip: 810ad90
L1 -1023942563- <ict_callbacks.c: 68> OnEvent_New_Incoming2xxResponse!
L3 -1023942563- <osipdialog.c: 292> info: Contact in 2xx - adding to route
list
L2 -1023942563- <ict_callbacks.c: 90> The content-type is not explicitely
set.
L1 -1023942563- <ict_callbacks.c: 101> Found body application/sdp
L3 -1023942563- <sdp_rfc2327.c: 1309> The rfc2327 says there should be at
least an email or a phone header!- anyway, we don't mind about it.
L2 -1023942563- <sdpcontext.c: 71> sdp_context_notify_inc_resp: could not
parse sdp msg.

Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 1026 (LWP 29942)]
0x404b1c40 in sdp_m_port_get (sdp=0x0, pos_media=0) at sdp_accessor.c:380
380     sdp_accessor.c: No such file or directory.
        in sdp_accessor.c
(gdb) where
#0  0x404b1c40 in sdp_m_port_get (sdp=0x0, pos_media=0) at
sdp_accessor.c:380
#1  0x0805bc42 in invite_accepted_cb (call=0x8114098, trn=0x811fb70,
    msg=0x810ad90, p2=0x0) at callbacks.c:284
#2  0x4048a261 in ict_2xx_received (trn=0x811fb70, sipmsg=0x810ad90)
    at ict_callbacks.c:121
#3  0x404ba823 in ict_rcv_2xx (ict=0x811fb70, evt=0x8119788) at
ict_fsm.c:226
#4  0x404be239 in fsm_callmethod (type=RCV_STATUS_2XX, state=ICT_PROCEEDING,
    statemachine=0x8076990, sipevent=0x8119788, transaction=0x811fb70)
    at fsm_misc.c:61
#5  0x404c03d6 in transaction_execute (transaction=0x811fb70, evt=0x8119788)
    at transaction.c:223
#6  0x4048efda in osipua_distribute_event (m=0x8076890, ev=0x8119788)
    at udp.c:58
#7  0x4048f371 in udp_receive (manager=0x8076890) at udp.c:165
#8  0x4048f07d in sipd_thread (managerp=0x8076890) at udp.c:80
#9  0x40514bfd in pthread_start_thread (arg=0x40e86c00) at manager.c:262
#10 0x40514cdf in pthread_start_thread_event (arg=0x40e86c00) at
manager.c:285
(gdb) thread 1
[Switching to thread 1 (Thread 1024 (LWP 29940))]#0  0x40627227 in __poll (
    fds=0x8119808, nfds=3, timeout=-1) at
../sysdeps/unix/sysv/linux/poll.c:63
63      ../sysdeps/unix/sysv/linux/poll.c: No such file or directory.
        in ../sysdeps/unix/sysv/linux/poll.c
(gdb) where
#0  0x40627227 in __poll (fds=0x8119808, nfds=3, timeout=-1)
    at ../sysdeps/unix/sysv/linux/poll.c:63
#1  0x404fb241 in g_main_poll () from /usr/lib/libglib-1.2.so.0
#2  0x404fabd4 in g_main_iterate () from /usr/lib/libglib-1.2.so.0
#3  0x404faf8c in g_main_run () from /usr/lib/libglib-1.2.so.0
#4  0x401ea803 in gtk_main () at eval.c:41
#5  0x40407dd7 in applet_widget_gtk_main () at eval.c:41
#6  0x08051d18 in main (argc=1, argv=0xbffff8bc) at main.c:224
#7  0x40564177 in __libc_start_main (main=0x8051960 <main>, argc=1,
    ubp_av=0xbffff8bc, init=0x8050248 <_init>, fini=0x806ad90 <_fini>,
    rtld_fini=0x4000e184 <_dl_fini>, stack_end=0xbffff8ac)
    at ../sysdeps/generic/libc-start.c:129
(gdb) thread 2
[Switching to thread 2 (Thread 2049 (LWP 29941))]#0  0x40627227 in __poll (
    fds=0x807deb4, nfds=1, timeout=2000)
    at ../sysdeps/unix/sysv/linux/poll.c:63
63      in ../sysdeps/unix/sysv/linux/poll.c
(gdb) where
#0  0x40627227 in __poll (fds=0x807deb4, nfds=1, timeout=2000)
    at ../sysdeps/unix/sysv/linux/poll.c:63
#1  0x40514900 in __pthread_manager (arg=0x8) at manager.c:136
#2  0x40515499 in __pthread_manager_event (arg=0x8) at manager.c:218
(gdb) thread 3
[Switching to thread 3 (Thread 1026 (LWP 29942))]#0  0x404b1c40 in
sdp_m_port_get (sdp=0x0, pos_media=0) at sdp_accessor.c:380
380     sdp_accessor.c: No such file or directory.
        in sdp_accessor.c
(gdb) where
#0  0x404b1c40 in sdp_m_port_get (sdp=0x0, pos_media=0) at
sdp_accessor.c:380
#1  0x0805bc42 in invite_accepted_cb (call=0x8114098, trn=0x811fb70,
    msg=0x810ad90, p2=0x0) at callbacks.c:284
#2  0x4048a261 in ict_2xx_received (trn=0x811fb70, sipmsg=0x810ad90)
    at ict_callbacks.c:121
#3  0x404ba823 in ict_rcv_2xx (ict=0x811fb70, evt=0x8119788) at
ict_fsm.c:226
#4  0x404be239 in fsm_callmethod (type=RCV_STATUS_2XX, state=ICT_PROCEEDING,
    statemachine=0x8076990, sipevent=0x8119788, transaction=0x811fb70)
    at fsm_misc.c:61
#5  0x404c03d6 in transaction_execute (transaction=0x811fb70, evt=0x8119788)
    at transaction.c:223
#6  0x4048efda in osipua_distribute_event (m=0x8076890, ev=0x8119788)
    at udp.c:58
#7  0x4048f371 in udp_receive (manager=0x8076890) at udp.c:165
#8  0x4048f07d in sipd_thread (managerp=0x8076890) at udp.c:80
#9  0x40514bfd in pthread_start_thread (arg=0x40e86c00) at manager.c:262
#10 0x40514cdf in pthread_start_thread_event (arg=0x40e86c00) at
manager.c:285
(gdb) thread 4
[Switching to thread 4 (Thread 2051 (zombie))]#0  __strtol_internal
(nptr=???,
    endptr=???, base=???, group=???) at eval.c:36
36      eval.c: No such file or directory.
        in eval.c
(gdb) where
#0  __strtol_internal (nptr=???, endptr=???, base=???, group=???) at
eval.c:36
(gdb) the   read 5
Thread ID 5 not known.
(gdb) q
The program is running.  Exit anyway? (y or n) y
 ]0;address@hidden: /home/ngnsip/address@hidden Linphone]#
Script done on Thu Jun 13 10:00:43 2002



Hope this is helpful for u. There may be some typogrqaphical errors, pls
ignore those in the report.

Thanx and regds
karthik


-----Original Message-----
From: Simon Morlat [mailto:address@hidden
Sent: Wednesday,June 12, 2002 6:18 PM
To: address@hidden
Cc: address@hidden
Subject: RE: [Linphone-users] URGENT help


Ok, thanks.
Could you please give a gdb report of this crash, if it is reproducable
?
For your information, if you don't know what to do, here are some
instructions:

gdb linphone
run
<then do the actions that produce the crash and wait for it, then gdb
should give you the prompt>
where
thread 1
where
thread 2
where
thread 3
where
thread 4
where
thread 5
where


In the case where the crash is not a crash but a deadlock (linphone is
locked), then you can do control-C to interrupt linphone, and then you
will be prompted for commands inside gdb.

Thank you very much.
Very often trace reports for crash are not enough. Here I see nothing
special, execpted that you did not configure linphone to run on the "lo"
interface, as it should be for the sipomatic test. However this error
from you does not explain the crash at all.

Simon
Le mer 12/06/2002 à 14:06, Karthikeyan S a écrit :
> Hi simon,
>
> I tried with that dummy bitio.c.IT got compiled , thanx for that.
> So with 0.8.8 Linphone I tested the robot (sipomatic). But suddenly
Linphone
> got crashed.
> I am attaching the debug report.
>
> #############
> Script started on Wed Jun 12 17:43:53 2002
> ]0;address@hidden: /home/ngnsip/address@hidden Linphone]$
> linphone
> L3 -1023884042- <osipua.c: 59> info: Starting osip stack and osipua layer.
> L4 -1023884042- <udp.c: 75> info: Entering osipua thread.
> Xlib: connection to ":0.0" refused by server Xlib: Client is not
authorized
> to connect to Server
> Gtk-WARNING **: cannot open display: :0
> ]0;address@hidden: /home/ngnsip/address@hidden Linphone]$ su
> Password:
> ]0;address@hidden: /home/ngnsip/address@hidden Linphone]#
linphone
> L3 -1023884057- <osipua.c: 59> info: Starting osip stack and osipua layer.
> L4 -1023884057- <udp.c: 75> info: Entering osipua thread.
> Found 2 interfaces.
> Found eth0 interface with ip address 10.4.7.241
>
> GnomeUI-WARNING **: Could not open help topics file NULL
> Adding <sip:address@hidden> to the list of alias.
> Added payload type 3 3 gsm/8000/1
> Added payload type 115 115 lpc10-15/8000/1
> Added payload type 8 8 pcma/8000/1
> Added payload type 0 0 pcmu/8000/1
> Acceptable blocksize for query (2048) is 2048
>  dsp opened.
> SUB_DIVIDE said error=-1,errno=22
> SUB_DIVIDE said error=0,errno=22
> Warning: dsp block size set to 16384.
> blocksize is 16384.
> L3 -1023884082- <osipmanager.c: 137> info: port already listened
> Added payload type 3 3 gsm/8000/1
> Added payload type 115 115 lpc10-15/8000/1
> Added payload type 8 8 pcma/8000/1
> Added payload type 0 0 pcmu/8000/1
> state=0
> L3 -1023884088- <sdp_rfc2327.c: 1309> The rfc2327 says there should be at
> least an email or a phone header!- anyway, we don't mind about it.
> L3 -1023884088- <transaction.c: 34> INFO: allocating transaction ressource
1
> 1215320193
> L3 -1023884088- <ict.c: 31> INFO: allocating ICT context
> L3 -1023884088- <transaction.c: 209> sipevent evt->transactionid: 1
> L3 -1023884088- <transaction.c: 210> sipevent tr->state: 0
> L3 -1023884088- <transaction.c: 211> sipevent evt->type: 16
> L3 -1023884088- <transaction.c: 212> sipevent evt->sip: 811b388
> L2 -1023884088- <udp.c: 192> Sending message:
> INVITE sip:address@hidden:5064 SIP/2.0 Via: SIP/2.0/UDP 127.0.0.1:5060
> From: <sip:address@hidden>;tag=34137 To: <sip:address@hidden:5064> Call-ID:
> address@hidden CSeq: 1 INVITE Contact: <sip:address@hidden>
> user-agent: oSIP/Linphone-0.8.0 Content-Type: application/sdp
> Content-Length: 222    v=0 o=root 123456 654321 IN IP4 127.0.0.1 s=A
> conversation c=IN IP4 127.0.0.1 t=0 0 m=audio 7077 RTP/AVP 3 115 8 0
> a=rtpmap:3 gsm/8000/1 a=rtpmap:115 lpc10-15/8000/1 a=rtpmap:8 pcma/8000/1
> a=rtpmap:0 pcmu/8000/1 L2 -1023884088- <udp.c: 159> info: RECEIVING UDP
> MESSAGE:
> SIP/2.0 100 Trying via: SIP/2.0/UDP 127.0.0.1:5060 from:
> sip:address@hidden;tag=34137 to: sip:address@hidden:5064 cseq: 1 INVITE
> call-id: address@hidden user-agent: oSIP/Linphone-0.4.2
> content-length: 0
> L3 -1023884088- <transaction.c: 243> sipevent evt: method called!
> L3 -1023884088- <transaction.c: 209> sipevent evt->transactionid: 1
> L3 -1023884088- <transaction.c: 210> sipevent tr->state: 1
> L3 -1023884088- <transaction.c: 211> sipevent evt->type: 13
> L3 -1023884088- <transaction.c: 212> sipevent evt->sip: 810e040
> L1 -1023884088- <ict_callbacks.c: 41> OnEvent_New_Incoming1xxResponse!
> invite state=1
> L3 -1023884088- <transaction.c: 243> sipevent evt: method called!
> L2 -1023884088- <udp.c: 159> info: RECEIVING UDP MESSAGE:
> SIP/2.0 180 Ringing via: SIP/2.0/UDP 127.0.0.1:5060 from:
> sip:address@hidden;tag=34137 to: sip:address@hidden:5064 cseq: 1 INVITE
> call-id: address@hidden contact: sip:address@hidden:5064
user-agent:
> oSIP/Linphone-0.4.2 content-length: 0
> L3 -1023884088- <transaction.c: 209> sipevent evt->transactionid: 1
> L3 -1023884088- <transaction.c: 210> sipevent tr->state: 2
> L3 -1023884088- <transaction.c: 211> sipevent evt->type: 13
> L3 -1023884088- <transaction.c: 212> sipevent evt->sip: 8113168
> L1 -1023884088- <ict_callbacks.c: 41> OnEvent_New_Incoming1xxResponse!
> Acceptable blocksize for query (2048) is 2048
>  dsp opened.
> SUB_DIVIDE said error=-1,errno
> #############
>
> sipomatic debug report ##############
> L3 -1023883661- <osipua.c: 59> info: Starting osip stack and osipua layer.
> L0 -1023883661- <osipmanager.c: 152> error: Failed to bind socket !
> L4 -1023883661- <udp.c: 75> info: Entering osipua thread.
> ################
>
> Pls provide me ur directions on this and gimme ur guidelines to run the
> sipomatic test. I used
> sip:address@hidden:5064 and lo as the interface. Is there i need to make.
>
> thanx and regds
> karthik
>


***************************************************************************
This message is proprietary to Future Software Limited (FSL) 
and is intended solely for the use of the individual to whom it
is addressed. It may contain  privileged or confidential information 
and should not be circulated or used for any purpose other than for 
what it is intended. 

If you have received this message in error, please notify the
originator immediately. If you are not the intended recipient,
you are notified that you are strictly prohibited from using,
copying, altering, or disclosing the contents of this message. 
FSL accepts no responsibility for loss or damage arising from 
the use of the information transmitted by this email including
damage from virus.
***************************************************************************