Re: Re: [PATCH v5 0/9] Add support for LoongArch

[武校田]

Thanks for your reply.

> Thanks for doing this testing. What are the values passed for the
> configure options --build, --host, and --target?

I compiled it on my local machine, using the Archlinux 2022.03 LoongArch
version, the iso and repository are here: 
https://mirrors.wsyu.edu.cn/loongarch/2022.03/

> Also, would you be able to run these tests again on a system with as
> many of the make check test prerequisites installed? They are listed in
> the INSTALL file in the repository root. This would allow the testing
> of various GRUB filesystem code which is not happening now (the reason
> many tests fail with ERROR).

I will check the dependencies required by grub-fs-tester, thanks.

> There are two actual failure in the provided log. One is the functional
> test, which are not expected to be working. The other is the partmap
> test, which should be working. Its not clear exactly which sub-test of
> the partmap test is failing (due to output not being very verbose). If
> you add 'set -x' to the top of partmap_test and rerun the tests, I can
> get a clearer picture of what's going on.
> 
> Glenn
> 

The details of this partmap_test are as follows:

+ echo 'Checking MSDOS partition types...'
Checking MSDOS partition types...
+ create_disk_image /tmp/tmp.N6QvM6XPXY 64
+ name=/tmp/tmp.N6QvM6XPXY
+ size=64
+ rm -f /tmp/tmp.N6QvM6XPXY
+ dd if=/dev/zero of=/tmp/tmp.N6QvM6XPXY bs=512 count=1 seek=131071 
status=noxfer
记录了1+0 的读入
记录了1+0 的写出
+ parted -a none -s /tmp/tmp.N6QvM6XPXY mklabel msdos
+ list_parts part_msdos /tmp/tmp.N6QvM6XPXY /tmp/tmp.dOULt2UJMN
+ mod=part_msdos
+ shift
+ imgfile=/tmp/tmp.N6QvM6XPXY
+ shift
+ outfile=/tmp/tmp.dOULt2UJMN
+ shift
+ ./grub-shell --disk=/tmp/tmp.N6QvM6XPXY --modules=part_msdos
+ echo ls
WARNING: Image format was not specified for '/tmp/tmp.N6QvM6XPXY' and probing 
guessed raw.
         Automatically detecting the format is dangerous for raw images, write 
operations on block 0 will be restricted.
         Specify the 'raw' format explicitly to remove the restrictions.
WARNING: Image format was not specified for '/tmp/tmp.mQzmZs2ROc' and probing 
guessed raw.
         Automatically detecting the format is dangerous for raw images, write 
operations on block 0 will be restricted.
         Specify the 'raw' format explicitly to remove the restrictions.
+ cat /tmp/tmp.dOULt2UJMN
+ tr -d '\n\r'
(hd0) (hd1) (hd1,gpt3) (hd1,gpt2,msdos1) (hd1,gpt2) (hd1,gpt1) + echo

+ check_output /tmp/tmp.dOULt2UJMN hd2
+ outfile=/tmp/tmp.dOULt2UJMN
+ shift
+ for dsk in $@
+ grep '(hd2)' /tmp/tmp.dOULt2UJMN
++ cat /tmp/tmp.dOULt2UJMN
+ echo '(hd2): disk/partiton not found in: (hd0) (hd1) (hd1,gpt3) 
(hd1,gpt2,msdos1) (hd1,gpt2) (hd1,gpt1) '
(hd2): disk/partiton not found in: (hd0) (hd1) (hd1,gpt3) (hd1,gpt2,msdos1) 
(hd1,gpt2) (hd1,gpt1) 
+ exit 1
FAIL partmap_test (exit status: 1)

It looks like it can't find '(hd2)' in the output.

------------------------------
Best Regards
Xiaotian Wu


本邮件及其附件含有龙芯中科的商业秘密信息，仅限于发送给上面地址中列出的个人或群组。禁止任何其他人以任何形式使用（包括但不限于全部或部分地泄露、复制或散发）本邮件及其附件中的信息。如果您错收本邮件，请您立即电话或邮件通知发件人并删除本邮件。
 
This email and its attachments contain confidential information from Loongson 
Technology , which is intended only for the person or entity whose address is 
listed above. Any use of the information contained herein in any way 
(including, but not limited to, total or partial disclosure, reproduction or 
dissemination) by persons other than the intended recipient(s) is prohibited. 
If you receive this email in error, please notify the sender by phone or email 
immediately and delete it.