grub-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PATCH v3] grub-fs-tester: Add luks1 and luks2 support


From: Glenn Washburn
Subject: [PATCH v3] grub-fs-tester: Add luks1 and luks2 support
Date: Tue, 14 Jun 2022 21:43:03 -0500

From: Pierre-Louis Bonicoli <pierre-louis.bonicoli@libregerbil.fr>

The logical sector size used by LUKS1 is 512 bytes and LUKS2 uses 512 to
4069 bytes. The deafualt password used is "pass", but can be overridden
by setting the PASS environment variable. The device mapper name is set
to the name of the temp directory so that its easy to corrolate device
mapper name with a particular test run. Also since this name is unique
per test run, multiple simultaneous test runs are allowed.

Note that cryptsetup is passing the --disable-locks parameter to allow
cryptsetup run successfully when /run/lock/cryptsetup is not accessible.
Since the device mapper name is unique per test run, there is no need to
worry about locking the device to serialize access.

Signed-off-by: Pierre-Louis Bonicoli <pierre-louis.bonicoli@libregerbil.fr>
Signed-off-by: Glenn Washburn <development@efficientek.com>
---
This is a heavily modified version of Pierre-Louis's v2 patch. It has been
tested with Fabian's v3 and Josselin's v4 series. Some notable differences
from the previous version:
 * Rebase on to master accounting for cleanup() changes
 * Allow multple tests runs to run simultaneously
 * Allow specifying alternate password with environment variable
 * Fixed bug in previous version where LC_ALL=C was being set for echo and
   not run_it
 * Make output on UUID fail consistent with other filesystems
 * Allow tests to work with older cryptsetups
 * Fixed bug where luks1 tests were actually testing luks2
 * Address my review comments

Note: The luks2 test will fail without some form of working grub-probe
support for luks2. This patch is independent of the above mentioned
patch series, will apply without them just fine, and can be reviewed
independently.

Glenn
---
 .gitignore                   |  2 ++
 Makefile.util.def            | 12 ++++++++
 tests/luks1_test.in          | 23 +++++++++++++++
 tests/luks2_test.in          | 23 +++++++++++++++
 tests/util/grub-fs-tester.in | 57 ++++++++++++++++++++++++++++++++++--
 5 files changed, 115 insertions(+), 2 deletions(-)
 create mode 100644 tests/luks1_test.in
 create mode 100644 tests/luks2_test.in

diff --git a/.gitignore b/.gitignore
index f6a1bd051..4064d3d1e 100644
--- a/.gitignore
+++ b/.gitignore
@@ -230,6 +230,8 @@ widthspec.bin
 /lib/libgcrypt-grub
 /libgrub_a_init.c
 /lzocompress_test
+/luks1_test
+/luks2_test
 /m4/
 /minixfs_test
 /missing
diff --git a/Makefile.util.def b/Makefile.util.def
index d919c562c..3f1162b76 100644
--- a/Makefile.util.def
+++ b/Makefile.util.def
@@ -1213,6 +1213,18 @@ script = {
   common = tests/syslinux_test.in;
 };
 
+script = {
+  testcase = native;
+  name = luks1_test;
+  common = tests/luks1_test.in;
+};
+
+script = {
+  testcase = native;
+  name = luks2_test;
+  common = tests/luks2_test.in;
+};
+
 program = {
   testcase = native;
   name = example_unit_test;
diff --git a/tests/luks1_test.in b/tests/luks1_test.in
new file mode 100644
index 000000000..cd28fd714
--- /dev/null
+++ b/tests/luks1_test.in
@@ -0,0 +1,23 @@
+#!@BUILD_SHEBANG@
+
+set -e
+
+if [ "x$EUID" = "x" ] ; then
+  EUID=`id -u`
+fi
+
+if [ "$EUID" != 0 ] ; then
+   exit 99
+fi
+
+if ! which mkfs.ext2 >/dev/null 2>&1; then
+   echo "mkfs.ext2 not installed; cannot test luks."
+   exit 99
+fi
+
+if ! which cryptsetup >/dev/null 2>&1; then
+   echo "cryptsetup not installed; cannot test luks."
+   exit 99
+fi
+
+"@builddir@/grub-fs-tester" luks1
diff --git a/tests/luks2_test.in b/tests/luks2_test.in
new file mode 100644
index 000000000..6a26ba626
--- /dev/null
+++ b/tests/luks2_test.in
@@ -0,0 +1,23 @@
+#!@BUILD_SHEBANG@
+
+set -e
+
+if [ "x$EUID" = "x" ] ; then
+  EUID=`id -u`
+fi
+
+if [ "$EUID" != 0 ] ; then
+   exit 99
+fi
+
+if ! which mkfs.ext2 >/dev/null 2>&1; then
+   echo "mkfs.ext2 not installed; cannot test luks2."
+   exit 99
+fi
+
+if ! which cryptsetup >/dev/null 2>&1; then
+   echo "cryptsetup not installed; cannot test luks2."
+   exit 99
+fi
+
+"@builddir@/grub-fs-tester" luks2
diff --git a/tests/util/grub-fs-tester.in b/tests/util/grub-fs-tester.in
index 43f6175c3..e488c0e41 100644
--- a/tests/util/grub-fs-tester.in
+++ b/tests/util/grub-fs-tester.in
@@ -6,6 +6,7 @@ export BLKID_FILE=/dev/null
 fs="$1"
 
 GRUBFSTEST="@builddir@/grub-fstest"
+GRUBPROBE="@builddir@/grub-probe"
 
 tempdir=`mktemp -d "${TMPDIR:-/tmp}/${0##*/}.$(date 
'+%Y%m%d%H%M%S%N').${fs}.XXX"` ||
 { echo "Failed to make temporary directory"; exit 99; }
@@ -13,6 +14,8 @@ tempdir=`mktemp -d "${TMPDIR:-/tmp}/${0##*/}.$(date 
'+%Y%m%d%H%M%S%N').${fs}.XXX
 # xorriso -as mkisofs options to ignore locale when processing file names and
 # FSLABEL. This is especially needed for the conversion to Joliet UCS-2.
 XORRISOFS_CHARSET="-input-charset UTF-8 -output-charset UTF-8"
+DMNAME="${tempdir##*/}"
+PASS="${PASS:-pass}"
 
 MOUNTS=
 LODEVICES=
@@ -28,6 +31,10 @@ cleanup() {
        umount "$i" || :
     done
 
+    if [ -e /dev/mapper/"$DMNAME" ]; then
+       cryptsetup close --disable-locks "$DMNAME"
+    fi
+
     for lodev in $LODEVICES; do
        local i=600
        while losetup -l -O NAME | grep -q "^$lodev\$"; do
@@ -68,7 +75,12 @@ run_grubfstest () {
        need_images="$need_images $FSIMAGEP${i}.img";
     done
 
-    run_it -c $NEED_IMAGES_N $need_images  "$@"
+    case x"$fs" in
+       xluks*)
+           echo -n "$PASS" | run_it -C -c $NEED_IMAGES_N $need_images  "$@";;
+       *)
+           run_it -c $NEED_IMAGES_N $need_images  "$@";;
+    esac
 }
 
 # OS LIMITATION: GNU/Linux has no AFS support, so we use a premade image and a 
reference tar file. I.a. no multiblocksize test
@@ -76,6 +88,8 @@ run_grubfstest () {
 MINLOGSECSIZE=9
 MAXLOGSECSIZE=9
 case x"$fs" in
+    xluks2)
+       MAXLOGSECSIZE=12;;
     xntfs*)
        MINLOGSECSIZE=8
        MAXLOGSECSIZE=12;;
@@ -363,7 +377,7 @@ for LOGSECSIZE in $(range "$MINLOGSECSIZE" "$MAXLOGSECSIZE" 
1); do
                    #FSLABEL="g;/_é莭莽😁кит u"
                    ;;
                # FS LIMITATION: reiserfs, extN and jfs label is at most 16 
UTF-8 characters
-               x"reiserfs_old" | x"reiserfs" | x"ext"* | x"lvm"* | x"mdraid"* 
| x"jfs" | x"jfs_caseins")
+               x"reiserfs_old" | x"reiserfs" | x"ext"* | x"lvm"* | x"luks"* | 
x"mdraid"* | x"jfs" | x"jfs_caseins")
                    FSLABEL="g;/éт 莭😁";;
                # FS LIMITATION: No underscore, space, semicolon, slash or 
international characters in UFS* in label. Limited to 32 UTF-8 characters
                x"ufs1" | x"ufs1_sun" | x"ufs2")
@@ -832,6 +846,12 @@ for LOGSECSIZE in $(range "$MINLOGSECSIZE" 
"$MAXLOGSECSIZE" 1); do
                    MOUNTDEVICE="/dev/mapper/grub_test-testvol"
                    MOUNTFS=ext2
                    "mkfs.ext2" -L "$FSLABEL" -q "${MOUNTDEVICE}"  ;;
+               x"luks"*)
+                   echo -n "$PASS" | cryptsetup luksFormat --type "$fs" 
--sector-size $SECSIZE --pbkdf pbkdf2 --disable-locks $LODEVICE
+                   echo -n "$PASS" | cryptsetup open --disable-locks $LODEVICE 
"$DMNAME"
+                   MOUNTDEVICE="/dev/mapper/${DMNAME}"
+                   MOUNTFS=ext2
+                   "mkfs.ext2" -L "$FSLABEL" -q "${MOUNTDEVICE}"  ;;
                xf2fs)
                    "mkfs.f2fs" -l "$FSLABEL" -q "${MOUNTDEVICE}" ;;
                xnilfs2)
@@ -944,6 +964,22 @@ for LOGSECSIZE in $(range "$MINLOGSECSIZE" 
"$MAXLOGSECSIZE" 1); do
                    GRUBDEVICE="mduuid/`mdadm --detail --export $MOUNTDEVICE | 
grep MD_UUID=|sed 's,MD_UUID=,,g;s,:,,g'`";;
                xlvm*)
                    GRUBDEVICE="lvm/grub_test-testvol";;
+               xluks*)
+                   if test x"$fs" = xluks2 && ! (cryptsetup luksDump 
--debug-json --disable-locks $LODEVICE | grep -q "\"sector_size\":$SECSIZE"); 
then
+                           echo "Unexpected sector size for $LODEVICE 
(expected: $SECSIZE)"
+                           exit 1
+                   fi
+
+                   UUID=$(cryptsetup luksUUID --disable-locks $LODEVICE | tr 
-d '-')
+                   PROBE_UUID=$("$GRUBPROBE" --device $MOUNTDEVICE 
--target=cryptodisk_uuid)
+                   if [ x"$UUID" != x"$PROBE_UUID" ]; then
+                       echo "UUID FAIL"
+                       echo "$UUID"
+                       echo "$PROBE_UUID"
+                       exit 1
+                   fi
+                   GRUBDEVICE="cryptouuid/${UUID}"
+                   ;;
            esac
            GRUBDIR="($GRUBDEVICE)"
            case x"$fs" in
@@ -1102,6 +1138,15 @@ for LOGSECSIZE in $(range "$MINLOGSECSIZE" 
"$MAXLOGSECSIZE" 1); do
                    sleep 1
                    vgchange -a n grub_test
                    ;;
+               xluks*)
+                   for try in $(range 0 20 1); do
+                       if umount "$MNTPOINTRW" ; then
+                           break;
+                       fi
+                   done
+                   UMOUNT_TIME=$(date -u "+%Y-%m-%d %H:%M:%S")
+                   cryptsetup close --disable-locks "$DMNAME"
+                   ;;
                xmdraid*)
                    sleep 1
                    for try in $(range 0 20 1); do
@@ -1152,6 +1197,11 @@ for LOGSECSIZE in $(range "$MINLOGSECSIZE" 
"$MAXLOGSECSIZE" 1); do
                    mount -t "$MOUNTFS" "${MOUNTDEVICE}" "$MNTPOINTRO" -o 
${MOUNTOPTS}${SELINUXOPTS}ro
                    MOUNTS="$MOUNTS $MNTPOINTRO"
                    ;;
+               xluks*)
+                   echo -n "$PASS" | cryptsetup open --disable-locks $LODEVICE 
"$DMNAME"
+                   mount -t "$MOUNTFS" "${MOUNTDEVICE}" "$MNTPOINTRO" -o 
${MOUNTOPTS}${SELINUXOPTS}ro
+                   MOUNTS="$MOUNTS $MNTPOINTRO"
+                   ;;
                xmdraid*)
                    mdadm --assemble /dev/md/"${fs}_$NDEVICES" $LODEVICES
                    sleep 1
@@ -1600,6 +1650,9 @@ for LOGSECSIZE in $(range "$MINLOGSECSIZE" 
"$MAXLOGSECSIZE" 1); do
                    vgchange -a n grub_test
                    sleep 1
                    ;;
+               xluks*)
+                   cryptsetup close --disable-locks "$DMNAME"
+                   ;;
            esac
            case x"$fs" in
                x"tarfs" | x"cpio_"* | x"iso9660" | xrockridge | xjoliet | 
xrockridge_joliet | x"ziso9660" | x"romfs" | x"squash4_"* | x"iso9660_1999" | 
xrockridge_1999 | xjoliet_1999 | xrockridge_joliet_1999) ;;
-- 
2.34.1




reply via email to

[Prev in Thread] Current Thread [Next in Thread]