grub-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PATCH v2] Fix vlan networking on little-endian systems


From: Chad Kimes
Subject: [PATCH v2] Fix vlan networking on little-endian systems
Date: Wed, 2 Mar 2022 14:21:22 -0500

Vlan configuration seems to have never worked on little-endian systems. This is
likely because VLANTAG_IDENTIFIER is not byte-swapped before copying into the
net buffer, nor is vlantag. We can resolve this by using grub_cpu_to_be16 and
its inverse when copying vlan info to/from the net buffer.

Signed-off-by: Chad Kimes <chkimes@github.com>
---
 grub-core/net/ethernet.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/grub-core/net/ethernet.c b/grub-core/net/ethernet.c
index 4d7ceed6f..a9906338c 100644
--- a/grub-core/net/ethernet.c
+++ b/grub-core/net/ethernet.c
@@ -58,7 +58,7 @@ send_ethernet_packet (struct grub_net_network_level_interface 
*inf,
   struct etherhdr *eth;
   grub_err_t err;
   grub_uint8_t etherhdr_size;
-  grub_uint16_t vlantag_id = VLANTAG_IDENTIFIER;
+  grub_uint16_t vlantag_id = grub_cpu_to_be16_compile_time 
(VLANTAG_IDENTIFIER);
 
   etherhdr_size = sizeof (*eth);
   COMPILE_TIME_ASSERT (sizeof (*eth) + 4 < GRUB_NET_MAX_LINK_HEADER_SIZE);
@@ -93,8 +93,9 @@ send_ethernet_packet (struct grub_net_network_level_interface 
*inf,
                    (char *) nb->data + etherhdr_size - 6, 2);
 
       /* Add the tag in the middle */
+      grub_uint16_t vlan = grub_cpu_to_be16 (inf->vlantag);
       grub_memcpy ((char *) nb->data + etherhdr_size - 6, &vlantag_id, 2);
-      grub_memcpy ((char *) nb->data + etherhdr_size - 4, (char *) 
&(inf->vlantag), 2);
+      grub_memcpy ((char *) nb->data + etherhdr_size - 4, &vlan, 2);
     }
 
   return inf->card->driver->send (inf->card, nb);
@@ -118,9 +119,9 @@ grub_net_recv_ethernet_packet (struct grub_net_buff *nb,
   /* Check if a vlan-tag is present. If so, the ethernet header is 4 bytes */
   /* longer than the original one. The vlantag id is extracted and the header 
*/
   /* is reseted to the original size. */
-  if (grub_get_unaligned16 (nb->data + etherhdr_size - 2) == 
VLANTAG_IDENTIFIER)
+  if (grub_get_unaligned16 (nb->data + etherhdr_size - 2) == 
grub_cpu_to_be16_compile_time (VLANTAG_IDENTIFIER))
     {
-      vlantag = grub_get_unaligned16 (nb->data + etherhdr_size);
+      vlantag = grub_be_to_cpu16 (grub_get_unaligned16 (nb->data + 
etherhdr_size));
       etherhdr_size += 4;
       /* Move eth type to the original position */
       grub_memcpy((char *) nb->data + etherhdr_size - 6,
-- 
2.25.1




reply via email to

[Prev in Thread] Current Thread [Next in Thread]