Hi, i take note for lut.im, thank you.
i tried to add the "mem=xxx" param (exemple "mem=2147483648" for 2GB
RAM) on differents computers but it never resolved the problem.
To respond to Narcis Garcia, i tried to start the gNewSense 4 i386
live
CD on these computers :
- Desktop computer with Asrock N3150B-ITX motherboard with 64-bit 2.1
GHZ Intel quad core processor and 8GB RAM running Debian 8.4.
- netbook Asus eee PC 1001HA with 32-bit Intel N270 1.6 GHZ single
core
processor and 2GB RAM running gNewSense 3.1.
- netbook HP Pavilion 10-e001sf with 64-bit AMD 1GHZ dual core A4
processor and 2GB RAM running Trisquel 7.
- notebook HP compaq NX6125 with 32-bit AMD Sempron 1.8 GHZ single
core
processor and ~ 1.2 GB RAM running Trisquel 7.
Always the same error message visible on the photos
http://www.casimages.com/u/renaud15/355399/
I will retry to burn the iso file to a new USB key and also to a DVD.
Renaud
Le 07-05-2016 16:51, Tio a écrit :
Renaud
For sharing screenshots or pictures
You can allso use
https://lut.im/
License: AGPL
The images are encrypted on the server (Lutim does not keep the key).
Toile-Libre est une association qui propose des services
d'hébergement
internet à prix libre..
http://www.toile-libre.org/
the error message displayed is similar to
https://wiki.debian.org/InstallingDebianOn/Dell/XPS630i/wheezy
Initramfs unpacking failed: junk in compressed archive
Kernel panic - not syncing: VFS: Unable to mount root fs on
unknown-block{x,y}
And am not sure if this may help(?)
Workaround :
Boot from CD or DVD
Add "mem=xxx" (without quotes and replace xxx with your memory)
to
the end of the boot options string
Hit return to start boot process
To determine your memory :
mem=X*1024*1024*1024 where X is the number of GB ram you have.
Example: 4GB Ram = 4*1024*1024*1024=4294967296, add
"mem=4294967296"
Example: 6GB Ram = 6*1024*1024*1024=4294967296, add
"mem=6442450944"
Tio~/
On Sat, 07 May 2016 00:32:20 +0200
address@hidden wrote:
Hello,
No, the i386 netboot and live images do not work. I tried to start
gNewSense 4 i386 live on 4 differents PC without success (2
computers
have 32-bit CPU and 2 have 64-bit CPU). Everytime the same error,
see
photos below. I also tried to install it, the installation program
can't
load the "release" file. I checked the live iso file with md5sum
with
success and tried to reburn the USB key with "dd" but it did not
resolve
the problem. The "amd64" version works good.
Photos of the problems : http://www.casimages.com/u/renaud15/355399/
Renaud
Le 06-05-2016 07:34, Marcus Moeller a écrit :
> Hi Sam.
>
>> Op Tue, 03 May 2016 22:36:49 +0200
>> schreef address@hidden:
>>
>>> Hi, i can't launch the live cd of gNewSense 4 on an Asus eee pc
>>> 1001HA netbook. I tried the live session 686 and the failsafe 686
>>> session. See attached photos in this email.
>>
>> Weird. Does the netboot image [1] work for you?
>>
>> [1]
>>
http://archive.gnewsense.org/gnewsense/dists/ucclia/main/installer-i386/current/images/netboot/mini.iso
>
> I experience the same with the Netboot Image, but I have tested AMD64.
>
> Greets
> Marcus
>
> _______________________________________________
> gNewSense-users mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/gnewsense-users
_______________________________________________
gNewSense-users mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/gnewsense-users
_______________________________________________
gNewSense-users mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/gnewsense-users