[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[gNewSense-users] I am unable to boot from vmlinuz-2.6.33.3-libre-lemote
From: |
Christophe Jarry |
Subject: |
[gNewSense-users] I am unable to boot from vmlinuz-2.6.33.3-libre-lemote since upgrade |
Date: |
Wed, 22 Jun 2011 12:48:03 +0200 |
Dear gNewSense users,
Some time ago, I decided to install linux 2.6.37-libre-lemote and to boot from
it. After having updated my /boot.cfg and my /etc/fstab by using sdaX instead
of hdaX, I was able to boot from linux 2.6.37-libre-lemote.
Sometime in May, I did an upgrade of my system moving from Metad to Parkes.
Now when I try to boot from /boot/vmlinuz-2.6.33.3-libre-lemote, I replace sdaX
by hdaX in my /etc/fstab before booting on 2.6.33.3. Then, I can log in but
Linux-libre does not mount my /dev/hda2 to /home as intended. So, when I am
logged in as a user, I am under / and cannot access my /home.
For your information, here are the contents of my /boot.cfg and /etc/fstab
files (I use linux 2.6.37-libre-lemote now):
default 1
timeout 2
showmenu 1
title gNewSense metad - 2.6.33.3
kernel (wd0,0)/boot/vmlinuz-2.6.33.3-libre-lemote
args console=tty no_auto_cmd root=/dev/hda1 resume=/dev/hda3 rootdelay=8
machtype=8.9
title gNewSense metad - 2.6.37
kernel (wd0,0)/boot/vmlinuz-2.6.37-libre-lemote
args console=tty no_auto_cmd root=/dev/sda1 resume=/dev/sda3 rootdelay=8
machtype=8.9
---
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
/dev/sda1 / ext3 errors=remount-ro 0 0
/dev/sda2 /home ext3 defaults 0 0
/dev/sda3 none swap sw,pri=20000 0 0
Does someone know how I can resolve this problem?
Thanks,
Christophe
- [gNewSense-users] I am unable to boot from vmlinuz-2.6.33.3-libre-lemote since upgrade,
Christophe Jarry <=