gnewsense-users
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[gNewSense-users] Re: gNewSense-users Digest, Vol 40, Issue 30


From: Peter Rock
Subject: [gNewSense-users] Re: gNewSense-users Digest, Vol 40, Issue 30
Date: Wed, 27 Jan 2010 09:13:08 +0800

> Message: 1
> Date: Mon, 25 Jan 2010 23:12:29 +0100
> From: Sam Geeraerts <address@hidden>
> Subject: Re: [gNewSense-users] lemote does not boot after install
> To: gNS users list <address@hidden>
> Message-ID: <address@hidden>
> Content-Type: text/plain; charset=UTF-8; format=flowed

> Press del key upon powerup. On PMON type...
>
> load (usb0,0)/boot/vmlinux-2.6.31.6-libre1
> initrd (usb0,0)/boot/initrd.img-2.6.31.6-libre1
> g console=tty no_auto_cmd root=/dev/hda1 rootdelay=8 machtype=8.9
>
> It boots with the installed OS. When done open a terminal and type:

Following the instructions on the wiki, I don't have a
initrd.img-2.6.31.6-libre1 file on my USB. I have 2 files:

vmlinux-2.6.31.6-libre1
initrd.gz

I tried "load (usb0,0)/vmlinux-2.6.31.6-libre1" and that seemed to be fine.
Then "initrd (usb0,0)/initrd.gz" and that didn't give me an error but
I don't know if this is what I'm to do (I suspect this is where I'm
going wrong...should I be running initrd on a .gz file?).
Then "g console=tty no_auto_cmd root=/dev/hda1 rootdelay=8
machtype=8.9" simply runs the installation process again. But gNS is
already installed. I don't want to install it again.

I guess I'm confused as to how the initrd.img-2.6.31.6-libre1 file
ever made it to the USB along with it being in a /boot directory.




reply via email to

[Prev in Thread] Current Thread [Next in Thread]