gnewsense-users
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [gNewSense-users] gNewSense Repo


From: Karl Goetz
Subject: Re: [gNewSense-users] gNewSense Repo
Date: Fri, 23 Nov 2007 07:33:53 +1030

On Thu, 2007-11-22 at 08:46 -0500, Andres Genovez wrote:
> Hi thanks for your Help!
> 
> I downloaded the repo but I got this errors
> 
> Downloaded 13296 MiB in 93365s at 145.82 kiB/s
> Errors:
>  Release signature does not verify, use -v to see the gpg error.
>  Release signature does not verify, use -v to see the gpg error. 
>  Release signature does not verify, use -v to see the gpg error.
>  Release signature does not verify, use -v to see the gpg error.
>  Download of pool/main/c/cupsys/libcupsimage2_1.2.0-0ubuntu5_i386.deb
> failed: 500 read timeout Download of
> pool/universe/m/mozilla-locale-no-nb/mozilla-locale-no-nb_1.7-1_all.deb 
> failed: 500 Can't connect to ec.archive.gnewsense.org:80 (Bad hostname 
> 'ec.archive.gnewsense.org') Download of 
> pool/universe/m/mozilla-locale-pl/mozilla-locale-pl_1.7.12-1_all.deb failed: 
> 500 Can't connect to ec.archive.gnewsense.org:80 (Bad hostname 
> 'ec.archive.gnewsense.org')Failed to download files (3 errors)!

re run it.
:)
kk

> 
> What can I do? 
> 
> 2007/11/20, Karl Goetz <address@hidden>:
>         On Tue, 2007-11-20 at 22:52 -0500, Andres Genovez wrote:
>         > Ok thanks, so here it is correct me if I am wrong
>         >
>         > -----------------
>         > sudo debmirror --nosource -m
>         --host=ec.archive.gnewsense.org/
>         > --root=gnewsense/ --method=http --progress --dist=deltad
>         > --section=main,universe --arch=i386 gnewsense/
>         --ignore-release-gpg
>         > -----------------
>         >
>         > Do I need to add this? for security and updates? 
>         >
>         > ---------------
>         > sudo debmirror --nosource -m
>         --host=ec.archive.gnewsense.org/
>         > --root=gnewsense/ --method=http --progress
>         >
>         --dist=deltad,deltad-updates,deltad-security,deltad-backports 
>         > --section=main,universe --arch=i386 gnewsense/
>         --ignore-release-gpg
>         
>         -updates and -backports are not offically supported, so you
>         may or may
>         not want these.
>         kk
>         
>         > ----------------
>         >
>         > 2007/11/20, Brian Brazil < address@hidden>:
>         >         On Nov 20, 2007 10:04 PM, Andres Genovez
>         >         <address@hidden> wrote: 
>         >         > Greetings I have a little question
>         >         >
>         >         > How do I download All gNewSense and write It to
>         DVDs
>         >         >
>         >         > Since I don´t know because in gNewSense site,
>         maybe this is 
>         >         for
>         >         > downloading repos for development.
>         >         >
>         >         > Thanks!
>         >         >
>         >         >
>         >         > debmirror --nocleanup --verbose --progress
>         --method=http 
>         >         > --host=ie.archive.ubuntu.com --arch=i386 \
>         >         >  --source
>         >
>         --dist=dapper,dapper-security,dapper-updates,dapper-backports
>         >         > --section=main,main/debian-installer,universe \ 
>         >         >  --ignore-release-gpg
>         --root=ubuntu /the/target/directory
>         >
>         >         Off the top of my head: s/ubuntu.com/gnewsense.org/,
>         >         s/ubuntu/gnewsense/, s/dapper/deltad/ and
>         >         there's some option needed to pull the binaries too.
>         This will 
>         >         take ~30GB iirc.
>         >         Just main is ~10GB.
>         >
>         >         Brian
>         >         > --
>         >         > Atentamente
>         >         >
>         >         > Andrés Genovez Tobar / Departamento Tecnico 
>         >         > COMERCIAL SALVADOR PACHECO MORA S.A. / DESDE 1945
>         >         > SPM TECNOLOGIAS
>         >         > Cuenca, Luis Cordero 9-70 y Gran Colombia
>         >         >              Av. 27 de Febrero y Jacinto Flores 
>         >         > Teléfono. 593-7-2816587
>         >         > Fax. 593-7-2882016
>         >         > Celular 593-97670874
>         >         > Mail: address@hidden
>         >         > Viaje: address@hidden
>         >         > www.cspmsa.com
>         >         >
>         >         >
>         >         > _______________________________________________ 
>         >         > gNewSense-users mailing list
>         >         > address@hidden
>         >         >
>         http://lists.nongnu.org/mailman/listinfo/gnewsense-users
>         >         >
>         >
>         >
>         >
>         > --
>         > Atentamente
>         >
>         > Andrés Genovez Tobar / Departamento Tecnico
>         > COMERCIAL SALVADOR PACHECO MORA S.A. / DESDE 1945
>         > SPM TECNOLOGIAS
>         > Cuenca, Luis Cordero 9-70 y Gran Colombia
>         >              Av. 27 de Febrero y Jacinto Flores
>         > Teléfono. 593-7-2816587
>         > Fax. 593-7-2882016
>         > Celular 593-97670874 
>         > Mail: address@hidden
>         > Viaje: address@hidden
>         > www.cspmsa.com
>         > _______________________________________________
>         > gNewSense-users mailing list
>         > address@hidden
>         > http://lists.nongnu.org/mailman/listinfo/gnewsense-users
>         >
>         --
>         Karl Goetz <address@hidden>
>         Debian / Ubuntu / gNewSense
>         
> 
> 
> 
> -- 
> Atentamente
> 
> Andrés Genovez Tobar / Departamento Tecnico
> COMERCIAL SALVADOR PACHECO MORA S.A. / DESDE 1945
> SPM TECNOLOGIAS
> Cuenca, Luis Cordero 9-70 y Gran Colombia
>              Av. 27 de Febrero y Jacinto Flores
> Teléfono. 593-7-2816587
> Fax. 593-7-2882016
> Celular 593-97670874
> Mail: address@hidden
> Viaje: address@hidden
> www.cspmsa.com
-- 
Karl Goetz,
Debian user / Ubuntu contributor / gNewSense contributor
http://www.kgoetz.id.au





reply via email to

[Prev in Thread] Current Thread [Next in Thread]