[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Traverso-user] Use JAMin for mastering
From: |
Stefan Koelling |
Subject: |
Re: [Traverso-user] Use JAMin for mastering |
Date: |
Mon, 18 Feb 2008 20:31:21 +0100 |
Am Sun, 17 Feb 2008 17:51:16 +0100
schrieb <address@hidden>:
> On Sun, 17 Feb 2008 17:08:21 +0100
> Stefan Koelling <address@hidden> wrote:
>
> > Hi,
> >
> > I was trying to use traverso/ JAMin for mastering of my audio-files.
> > The attached screenshot shows how I connected the ports. The
> > settings of the mastering unit (output level, EQ) are directly
> > applied to the monitor - I am able to hear the modified
> > audio-signal. I have exported the track to an mp3-file, but (of
> > course) the modified signal, that has passed the mastering unit was
> > not exported. Is there a way to export the modified signal or do I
> > have to connect other signal paths via jack?
> >
> > Thank you for your reply.
> >
> > Reagrds,
> > Stefan
>
>
> Hi Stefan,
> the problem with your setup is that you connect jamin only to the
> audio output. This way you can hear it but you can't record it with
> any app (jamin doesn't record itself).
> What you need to do is to route the jamin output either back into the
> traverso input and record on another track or use any other app
> for that.
>
> Best Regards,
> Philipp
>
>
> _______________________________________________
> Traverso-user mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/traverso-user
Hi Philipp,
thank you for your reply. I did as you suggested and I was able to
record the modified signal on a second track.
Thank you again!
Regards,
Stefan
signature.asc
Description: PGP signature