[Fwd: Re: [Tlf-devel] Using TLF with hamlib]

[Bob Nielsen]

> On Fri, 2005-05-06 at 03:42 -0400, Ed wrote:
> > Bob Nielsen wrote:
> > > I tried the TS-570D with xlog and hamlib and had similar problems.
> > > Strangely, grig works for the most part (it talks to the radio but a few
> > > functions don't respond).  I'll see if I can figure out what is
> > > happening or ask on the hamlib list.  I'll also finish the I/O card for
> > > my K2 and give that a try.
> > > 
> > > Bob, N7XY
> > > 
> > > On Wed, 2005-05-04 at 12:13 +0200, Rein Couperus PA0R wrote:
> > > 
> > >>I have tlf-0.9.23 running without problem with hamblib 1.2.4 and the
> > >>ORION (rig nr. 1608). Also no problem with the K2.
> > >>
> > >>my config.h says:
> > >>
> > >>/* Define if you have the <hamlib/riglist.h> header file. */
> > >>/* #undef HAVE_HAMLIB_RIGLIST_H */
> > >>
> > >>/* Define if you have the <hamlib/rig.h> header file. */
> > >>#define HAVE_HAMLIB_RIG_H 1
> > >>
> > >>/* Define if you have the <inttypes.h> header file. */
> > >>#define HAVE_INTTYPES_H 1
> > >>
> > >>/* Define if you have the `hamlib' library (-lhamlib). */
> > >>#define HAVE_LIBHAMLIB 1
> > >>
> > >>Looks like tlf does not need riglist.h
> > >>
> > >>Moreover, the error message you get is not from tlf, but from hamlib, so
> > >>I would look in that direction...
> > >>
> > >>Anybody else have problems with the TS570D ?
> > >>
> > >>Rein PA0R
> > >>
> > >>
> > >>
> > >>
> > >>
> > >>On Mon, 2005-05-02 at 16:55 -0700, Bob Nielsen wrote:
> > >>
> > >>>I finally got around to trying to interface my TS-570D to my computer.  
> > >>>It works fine with grig, but I haven't been able to get the rig to talk 
> > >>>to TLF.
> > >>>
> > >>>I ran configure with --enable-hamlib.  It appears to recognize hamlib:
> > >>>
> > >>>checking for main in -lhamlib... yes
> > >>>checking hamlib/rig.h usability... yes
> > >>>checking hamlib/rig.h presence... yes
> > >>>checking for hamlib/rig.h... yes
> > >>>enabling hamlib support
> > >>>
> > >>>However, checking the resultant config.h, I see:
> > >>>
> > >>>
> > >>>/* Define if you have the <hamlib/riglist.h> header file. */
> > >>>/* #undef HAVE_HAMLIB_RIGLIST_H */
> > >>>
> > >>>However, /usr/include/hamlib/riglist.h exists.
> > >>>
> > >>>I compiled TLF and enabled rig control in logcfg.dat, setting RIGMODEL, 
> > >>>RIGSPEED and RIGPORT to the appropriate values.  When I run TLF, I get 
> > >>>the following:
> > >>>
> > >>>Trying to start rig ctrl
> > >>>rig_open: error
> > >>>
> > >>>Editing config.h to define HAVE_HAMLIB_RIGLIST_H doesn't help
> > >>>
> > >>>TLF is version 0.9.23 and hamlib-dev is version 1.2.4-1.  The system is
> > >>>a 1.2 GHz Celeron running Libranet 2.8.1 updated with packages from
> > >>>Debian Sarge and Sid.
> > >>>
> > >>>Any ideas?
> > >>>
> > >>>TIA and 73,
> > >>>
> > >>>Bob, N7XY
> > 
> > 
> > Bob, you do have hamlib-utils installed don't you. ??  I think you will
> > find it is needed for the apps you have installed. Not sure it is just a
> > Debian thing or not. TIA....73
> > 
> > Ed W3NR
> 
> Yes I do have hamlib-utils installed.  I had forgotten that it was on
> the system.  I will try the rigctl program included in that package to
> check things out and maybe I can get a clearer picture of what is
> happening.
> 
> Bob, N7XY
>