[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Therion] Introduction and question about join-syntax
From: |
Ladislav Blazek |
Subject: |
Re: [Therion] Introduction and question about join-syntax |
Date: |
Wed, 14 Nov 2007 14:11:22 +0100 (CET) |
User-agent: |
SquirrelMail/1.4.4 |
Hi Christian,
join command is used for joining scraps together. For joining two or more
surveys need to use equate command.
example:
one.th
------
survey one
centerline
data normal from to length compass clino
0 1 15 250 -10
1 2 8 120 -5
endcenterline
endsururvey
two.th
------
survey two
centerline
data normal from to length compass clino
0 1 5 150 -6
1 2 3 100 5
endcenterline
endsurvey
index.th
--------
survey index
input one.th
input two.th
centerline
equate address@hidden address@hidden
endcenterline
ensurvey
L.
Christian Rößler (Roessler) napsal(a):
> Good day,
>
> first let me introduce myself, perhaps: I am (of course) new to the
> Therion
> list. Well, I am from southern germany, the black forest, to be exact; and
> I
> am primarily interested in abandoned mines, not in caves. So I went on the
> search for a capable map-making software, found Therion and started with
> it -
> please bear with my as I am posting surely some stupid beginner's
> mistakes.
>
> Very nice software, Therion, by the way; and many thanks to the
> developers.
>
> But I have some problems. We are used to make lrud data when surveying
> mines,
> so I am bound to lrud (left-right-up-down I mean). I have come as far as
> mapping a single centerline successfully, but when I try to join two
> centerlines at the appropriate point I am stuck. I have tried al lot of
> possible join-syntaxes, so I fear my error lies perhaps deeper.
>
> I always get:
> | therion: error -- can not connect address@hidden to centerline
> | network
>
> I have a master file [eisenbach_hotel.thconfig] with just one line in it:
> | source eisenbach_hotel.th
>
> [eisenbach_hotel.th] reads:
> | survey Eisenbach -title "Hotelstollen Eisenbach Intervall 1"
> | input eisenbach_hotel_intervall_1.th
> | input eisenbach_hotel_intervall_2.th
> | join address@hidden address@hidden:end
> | #join address@hidden address@hidden
> | endsurvey
>
> If I out-comment one input line, no matter which, and insert an
> appropriate
> line with export in other place man I can successfully generate a
> background
> image for both after compiling, so I think the two data sets are ok. I
> have
> inserted these two sets below.
>
> Please, can anyone give me a functioning join line, or, if the error lies
> elsewhere, point me in the right direction?
>
> Many thanks,
> Christian
>
>
> The tho data sets:
> [eisenbach_hotel_intervall_1.th]:
> | survey Eisenbach_1 -title "Eisenbach 1. Intervall"
> | centerline
> | date 2007.11.08
> | declination -2 degrees
> | team "CHR"
> | data normal from to length compass clino left right up down
> | 0 2 2 340 1 0.55 1.30 1.40 0
> | [ ... data in between snipped for brevity]
> | 14 15.25 1.25 340 1 0.45 0.27 1.78 0
> | endcenterline
> | endsurvey
>
> [eisenbach_hotel_intervall_2.th]:
> | survey Eisenbach_2 -title "Eisenbach 2. Intervall"
> | centerline
> | date 2007.11.08
> | declination -2 degrees
> | team "CHR"
> | data normal from to length compass clino left right up down
> | 0 2 2 330 1 0.40 0.25 1.68 0
> | [...]
> | 14 15.25 1.25 330 1 0.69 0.37 1.40 0
> | endcenterline
> | endsurvey
> _______________________________________________
> Therion mailing list
> address@hidden
> http://www.speleo.sk/mailman/listinfo/therion
>
--
Ladislav Blazek
_______________________________________________
Therion mailing list
address@hidden
http://www.speleo.sk/mailman/listinfo/therion