[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
texinfo update (Thu May 18 09:22:01 EDT 2006)
|
From: |
Karl Berry |
|
Subject: |
texinfo update (Thu May 18 09:22:01 EDT 2006) |
|
Date: |
Thu, 18 May 2006 09:22:04 -0400 |
Index: config.guess
===================================================================
RCS file: /sources/texinfo/texinfo/config.guess,v
retrieving revision 1.60
retrieving revision 1.61
diff -u -r1.60 -r1.61
--- config.guess 29 Apr 2006 13:22:32 -0000 1.60
+++ config.guess 18 May 2006 13:12:00 -0000 1.61
@@ -4,7 +4,7 @@
# 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation,
# Inc.
-timestamp='2006-04-26'
+timestamp='2006-05-13'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
@@ -989,7 +989,7 @@
LIBC=gnulibc1
# endif
#else
- #if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__sun)
+ #if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__SUNPRO_C)
|| defined(__SUNPRO_CC)
LIBC=gnu
#else
LIBC=gnuaout
Index: config.rpath
===================================================================
RCS file: /sources/texinfo/texinfo/config.rpath,v
retrieving revision 1.6
retrieving revision 1.7
diff -u -r1.6 -r1.7
--- config.rpath 10 May 2006 13:33:43 -0000 1.6
+++ config.rpath 18 May 2006 13:12:00 -0000 1.7
@@ -25,7 +25,7 @@
# known workaround is to choose shorter directory names for the build
# directory and/or the installation directory.
-# All known linkers require a `.a' archive for static linking (except M$VC,
+# All known linkers require a `.a' archive for static linking (except MSVC,
# which needs '.lib').
libext=a
shrext=.so
@@ -35,7 +35,17 @@
host_vendor=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
host_os=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-cc_basename=`echo "$CC" | sed -e 's%^.*/%%'`
+# Code taken from libtool.m4's _LT_CC_BASENAME.
+
+for cc_temp in $CC""; do
+ case $cc_temp in
+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+done
+cc_basename=`echo "$cc_temp" | sed -e 's%^.*/%%'`
# Code taken from libtool.m4's AC_LIBTOOL_PROG_COMPILER_PIC.
@@ -48,7 +58,7 @@
wl='-Wl,'
;;
darwin*)
- case "$cc_basename" in
+ case $cc_basename in
xlc*)
wl='-Wl,'
;;
@@ -78,8 +88,12 @@
como)
wl='-lopt='
;;
- c89* | c99*)
- wl='-Wl,'
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ wl='-Wl,'
+ ;;
+ esac
;;
esac
;;
@@ -123,6 +137,10 @@
with_gnu_ld=no
fi
;;
+ interix*)
+ # we just hope/assume this is gcc and not c89 (= MSVC++)
+ with_gnu_ld=yes
+ ;;
openbsd*)
with_gnu_ld=no
;;
@@ -130,6 +148,12 @@
ld_shlibs=yes
if test "$with_gnu_ld" = yes; then
+ # Set some defaults for GNU ld with shared library support. These
+ # are reset later if shared libraries are not supported. Putting them
+ # here allows them to be overridden if necessary.
+ # Unlike libtool, we use -rpath here, not --rpath, since the documented
+ # option of GNU ld is called -rpath, not --rpath.
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
case "$host_os" in
aix3* | aix4* | aix5*)
# On AIX/PPC, the GNU linker is very broken
@@ -165,9 +189,20 @@
ld_shlibs=no
fi
;;
+ interix3*)
+ hardcode_direct=no
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ ;;
+ linux*)
+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+ :
+ else
+ ld_shlibs=no
+ fi
+ ;;
netbsd*)
;;
- solaris* | sysv5*)
+ solaris*)
if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
ld_shlibs=no
elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null;
then
@@ -176,16 +211,23 @@
ld_shlibs=no
fi
;;
+ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+ case `$LD -v 2>&1` in
+ *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+ ld_shlibs=no
+ ;;
+ *)
+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null;
then
+ hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo
${wl}-rpath,$libdir`'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ esac
+ ;;
sunos4*)
hardcode_direct=yes
;;
- linux*)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- :
- else
- ld_shlibs=no
- fi
- ;;
*)
if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
:
@@ -194,10 +236,8 @@
fi
;;
esac
- if test "$ld_shlibs" = yes; then
- # Unlike libtool, we use -rpath here, not --rpath, since the documented
- # option of GNU ld is called -rpath, not --rpath.
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ if test "$ld_shlibs" = no; then
+ hardcode_libdir_flag_spec=
fi
else
case "$host_os" in
@@ -228,6 +268,7 @@
break
fi
done
+ ;;
esac
fi
hardcode_direct=yes
@@ -247,6 +288,7 @@
hardcode_libdir_flag_spec='-L$libdir'
hardcode_libdir_separator=
fi
+ ;;
esac
fi
# Begin _LT_AC_SYS_LIBPATH_AIX.
@@ -294,7 +336,7 @@
if test "$GCC" = yes ; then
:
else
- case "$cc_basename" in
+ case $cc_basename in
xlc*)
;;
*)
@@ -329,24 +371,25 @@
# but as the default location of the library.
hardcode_minus_L=yes
;;
- hpux10* | hpux11*)
+ hpux10*)
if test "$with_gnu_ld" = no; then
- case "$host_cpu" in
- hppa*64*)
- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator=:
- hardcode_direct=no
- ;;
- ia64*)
- hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_direct=yes
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ fi
+ ;;
+ hpux11*)
+ if test "$with_gnu_ld" = no; then
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+ case $host_cpu in
+ hppa*64*|ia64*)
hardcode_direct=no
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- hardcode_minus_L=yes
;;
*)
- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator=:
hardcode_direct=yes
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
@@ -400,8 +443,6 @@
fi
hardcode_libdir_separator=:
;;
- sco3.2v5*)
- ;;
solaris*)
hardcode_libdir_flag_spec='-R$libdir'
;;
@@ -430,14 +471,11 @@
ld_shlibs=yes
fi
;;
- sysv4.2uw2*)
- hardcode_direct=yes
- hardcode_minus_L=no
- ;;
- sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*)
+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7*)
;;
- sysv5*)
- hardcode_libdir_flag_spec=
+ sysv5* | sco3.2v5* | sco5v6*)
+ hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo
${wl}-R,$libdir`'
+ hardcode_libdir_separator=':'
;;
uts4*)
hardcode_libdir_flag_spec='-L$libdir'
@@ -474,12 +512,12 @@
;;
kfreebsd*-gnu)
;;
- freebsd*)
+ freebsd* | dragonfly*)
;;
gnu*)
;;
hpux9* | hpux10* | hpux11*)
- case "$host_cpu" in
+ case $host_cpu in
ia64*)
shrext=.so
;;
@@ -491,6 +529,8 @@
;;
esac
;;
+ interix3*)
+ ;;
irix5* | irix6* | nonstopux*)
case "$host_os" in
irix5* | nonstopux*)
@@ -526,16 +566,16 @@
;;
osf3* | osf4* | osf5*)
;;
- sco3.2v5*)
- ;;
solaris*)
;;
sunos4*)
;;
- sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ sysv4 | sysv4.3*)
;;
sysv4*MP*)
;;
+ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ ;;
uts4*)
;;
esac
Index: install-sh
===================================================================
RCS file: /sources/texinfo/texinfo/install-sh,v
retrieving revision 1.18
retrieving revision 1.19
diff -u -r1.18 -r1.19
--- install-sh 29 Apr 2006 13:22:32 -0000 1.18
+++ install-sh 18 May 2006 13:12:00 -0000 1.19
@@ -1,7 +1,7 @@
#!/bin/sh
# install - install a program, script, or datafile
-scriptversion=2006-04-25.22
+scriptversion=2006-05-11.20
# This originates from X11R5 (mit/util/scripts/install.sh), which was
# later released in X11R6 (xc/config/util/install.sh) with the
@@ -42,12 +42,17 @@
# from scratch. It can only install one file at a time, a restriction
# shared with many OS's install programs.
+nl='
+'
+IFS=" "" $nl"
+
# set DOITPROG to echo to test this script
# Don't use :- since 4.3BSD and earlier shells don't like it.
doit="${DOITPROG-}"
-# put in absolute paths if you don't have them in your path; or use env. vars.
+# Put in absolute file names if you don't have them in your path;
+# or use environment vars.
mvprog="${MVPROG-mv}"
cpprog="${CPPROG-cp}"
@@ -311,9 +316,9 @@
# step, checking for races as we go.
case $dstdir in
- /*) pathcomp=/ ;;
- -*) pathcomp=./ ;;
- *) pathcomp= ;;
+ /*) prefix=/ ;;
+ -*) prefix=./ ;;
+ *) prefix= ;;
esac
case $posix_glob in
@@ -333,19 +338,36 @@
$posix_glob && set +f
IFS=$oIFS
+ prefixes=
+
for d
do
- test "x$d" = x && continue
+ test -z "$d" && continue
- pathcomp=$pathcomp$d
- if test ! -d "$pathcomp"; then
- $mkdirprog "$pathcomp"
- # Don't fail if two instances are running concurrently.
- test -d "$pathcomp" || exit 1
+ prefix=$prefix$d
+ if test -d "$prefix"; then
+ prefixes=
+ else
+ if $posix_mkdir; then
+ $mkdirprog -m "$mkdir_mode" -p -- "$dstdir" && break
+ # Don't fail if two instances are running concurrently.
+ test -d "$prefix" || exit 1
+ else
+ case $prefix in
+ *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+ *) qprefix=$prefix;;
+ esac
+ prefixes="$prefixes '$qprefix'"
+ fi
fi
- pathcomp=$pathcomp/
+ prefix=$prefix/
done
- obsolete_mkdir_used=true
+
+ if test -n "$prefixes"; then
+ # Don't fail if two instances are running concurrently.
+ eval "\$mkdirprog $prefixes" || test -d "$dstdir" || exit 1
+ obsolete_mkdir_used=true
+ fi
fi
fi
P config.guess
P config.rpath
P install-sh
| [Prev in Thread] |
Current Thread |
[Next in Thread] |
- texinfo update (Thu May 18 09:22:01 EDT 2006),
Karl Berry <=