[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-trivial] [Qemu-devel] [PATCH] docs: Grammar and spelling fixes
From: |
Markus Armbruster |
Subject: |
Re: [Qemu-trivial] [Qemu-devel] [PATCH] docs: Grammar and spelling fixes |
Date: |
Thu, 14 Jun 2018 21:14:25 +0200 |
User-agent: |
Gnus/5.13 (Gnus v5.13) Emacs/26.1 (gnu/linux) |
Looks like a candidate for merging via qemu-trivial.
Ville Skyttä <address@hidden> writes:
> Signed-off-by: Ville Skyttä <address@hidden>
> Reviewed-by: Peter Maydell <address@hidden>
> Reviewed-by: Eric Blake <address@hidden>
> ---
> docs/colo-proxy.txt | 2 +-
> docs/config/mach-virt-graphical.cfg | 2 +-
> docs/config/mach-virt-serial.cfg | 2 +-
> docs/config/q35-emulated.cfg | 2 +-
> docs/config/q35-virtio-graphical.cfg | 2 +-
> docs/config/q35-virtio-serial.cfg | 2 +-
> docs/devel/migration.rst | 2 +-
> docs/devel/multi-thread-tcg.txt | 2 +-
> docs/interop/qcow2.txt | 6 +++---
> docs/interop/vhost-user.txt | 4 ++--
> docs/memory-hotplug.txt | 2 +-
> docs/multiseat.txt | 2 +-
> docs/qemu-block-drivers.texi | 2 +-
> docs/qemupciserial.inf | 2 +-
> docs/specs/acpi_nvdimm.txt | 3 ++-
> docs/specs/ppc-spapr-hcalls.txt | 2 +-
> docs/specs/tpm.txt | 2 +-
> docs/usb2.txt | 2 +-
> 18 files changed, 22 insertions(+), 21 deletions(-)
>
> diff --git a/docs/colo-proxy.txt b/docs/colo-proxy.txt
> index 8b726ea094..1f8e4b4e77 100644
> --- a/docs/colo-proxy.txt
> +++ b/docs/colo-proxy.txt
> @@ -145,7 +145,7 @@ and redirect indev's packet to filter.
> COLO-compare, we do packet comparing job.
> Packets coming from the primary char indev will be sent to outdev.
> Packets coming from the secondary char dev will be dropped after comparing.
> -COLO-comapre need two input chardev and one output chardev:
> +COLO-compare needs two input chardevs and one output chardev:
> primary_in=chardev1-id (source: primary send packet)
> secondary_in=chardev2-id (source: secondary send packet)
> outdev=chardev3-id
> diff --git a/docs/config/mach-virt-graphical.cfg
> b/docs/config/mach-virt-graphical.cfg
> index 0fdf6846dd..d6d31b17f5 100644
> --- a/docs/config/mach-virt-graphical.cfg
> +++ b/docs/config/mach-virt-graphical.cfg
> @@ -185,7 +185,7 @@
> # attached to it.
> #
> # We also create an optical disk, mostly for installation
> -# purposes: once the guest OS has been succesfully
> +# purposes: once the guest OS has been successfully
> # installed, the guest will no longer boot from optical
> # media. If you don't want, or no longer want, to have an
> # optical disk in the guest you can safely comment out
> diff --git a/docs/config/mach-virt-serial.cfg
> b/docs/config/mach-virt-serial.cfg
> index aee9f1c5a1..18a7c83731 100644
> --- a/docs/config/mach-virt-serial.cfg
> +++ b/docs/config/mach-virt-serial.cfg
> @@ -191,7 +191,7 @@
> # attached to it.
> #
> # We also create an optical disk, mostly for installation
> -# purposes: once the guest OS has been succesfully
> +# purposes: once the guest OS has been successfully
> # installed, the guest will no longer boot from optical
> # media. If you don't want, or no longer want, to have an
> # optical disk in the guest you can safely comment out
> diff --git a/docs/config/q35-emulated.cfg b/docs/config/q35-emulated.cfg
> index c6416d6545..99ac918e78 100644
> --- a/docs/config/q35-emulated.cfg
> +++ b/docs/config/q35-emulated.cfg
> @@ -130,7 +130,7 @@
> # it to that controller so that the guest can use it.
> #
> # We also create an optical disk, mostly for installation
> -# purposes: once the guest OS has been succesfully
> +# purposes: once the guest OS has been successfully
> # installed, the guest will no longer boot from optical
> # media. If you don't want, or no longer want, to have an
> # optical disk in the guest you can safely comment out
> diff --git a/docs/config/q35-virtio-graphical.cfg
> b/docs/config/q35-virtio-graphical.cfg
> index 28bde2fc57..4207f11e4f 100644
> --- a/docs/config/q35-virtio-graphical.cfg
> +++ b/docs/config/q35-virtio-graphical.cfg
> @@ -136,7 +136,7 @@
> # attached to it.
> #
> # We also create an optical disk, mostly for installation
> -# purposes: once the guest OS has been succesfully
> +# purposes: once the guest OS has been successfully
> # installed, the guest will no longer boot from optical
> # media. If you don't want, or no longer want, to have an
> # optical disk in the guest you can safely comment out
> diff --git a/docs/config/q35-virtio-serial.cfg
> b/docs/config/q35-virtio-serial.cfg
> index c33c9cc07a..d2830aec5e 100644
> --- a/docs/config/q35-virtio-serial.cfg
> +++ b/docs/config/q35-virtio-serial.cfg
> @@ -141,7 +141,7 @@
> # attached to it.
> #
> # We also create an optical disk, mostly for installation
> -# purposes: once the guest OS has been succesfully
> +# purposes: once the guest OS has been successfully
> # installed, the guest will no longer boot from optical
> # media. If you don't want, or no longer want, to have an
> # optical disk in the guest you can safely comment out
> diff --git a/docs/devel/migration.rst b/docs/devel/migration.rst
> index 40f136f6be..6ed3fce061 100644
> --- a/docs/devel/migration.rst
> +++ b/docs/devel/migration.rst
> @@ -37,7 +37,7 @@ over any transport.
> - tcp migration: do the migration using tcp sockets
> - unix migration: do the migration using unix sockets
> - exec migration: do the migration using the stdin/stdout through a process.
> -- fd migration: do the migration using an file descriptor that is
> +- fd migration: do the migration using a file descriptor that is
> passed to QEMU. QEMU doesn't care how this file descriptor is opened.
>
> In addition, support is included for migration using RDMA, which
> diff --git a/docs/devel/multi-thread-tcg.txt b/docs/devel/multi-thread-tcg.txt
> index a99b4564c6..ac485c8e62 100644
> --- a/docs/devel/multi-thread-tcg.txt
> +++ b/docs/devel/multi-thread-tcg.txt
> @@ -308,7 +308,7 @@ other cores sharing access to the memory. The classic
> example is the
> x86 cmpxchg instruction.
>
> The second type offer a pair of load/store instructions which offer a
> -guarantee that an region of memory has not been touched between the
> +guarantee that a region of memory has not been touched between the
> load and store instructions. An example of this is ARM's ldrex/strex
> pair where the strex instruction will return a flag indicating a
> successful store only if no other CPU has accessed the memory region
> diff --git a/docs/interop/qcow2.txt b/docs/interop/qcow2.txt
> index 8e1547ded2..845d40a086 100644
> --- a/docs/interop/qcow2.txt
> +++ b/docs/interop/qcow2.txt
> @@ -326,8 +326,8 @@ in the image file.
> It contains pointers to the second level structures which are called refcount
> blocks and are exactly one cluster in size.
>
> -Given a offset into the image file, the refcount of its cluster can be
> obtained
> -as follows:
> +Given an offset into the image file, the refcount of its cluster can be
> +obtained as follows:
>
> refcount_block_entries = (cluster_size * 8 / refcount_bits)
>
> @@ -365,7 +365,7 @@ The L1 table has a variable size (stored in the header)
> and may use multiple
> clusters, however it must be contiguous in the image file. L2 tables are
> exactly one cluster in size.
>
> -Given a offset into the virtual disk, the offset into the image file can be
> +Given an offset into the virtual disk, the offset into the image file can be
> obtained as follows:
>
> l2_entries = (cluster_size / sizeof(uint64_t))
> diff --git a/docs/interop/vhost-user.txt b/docs/interop/vhost-user.txt
> index d51fd58242..f59667f498 100644
> --- a/docs/interop/vhost-user.txt
> +++ b/docs/interop/vhost-user.txt
> @@ -108,12 +108,12 @@ Depending on the request type, payload can be:
> IOVA: a 64-bit I/O virtual address programmed by the guest
> Size: a 64-bit size
> User address: a 64-bit user address
> - Permissions: a 8-bit value:
> + Permissions: an 8-bit value:
> - 0: No access
> - 1: Read access
> - 2: Write access
> - 3: Read/Write access
> - Type: a 8-bit IOTLB message type:
> + Type: an 8-bit IOTLB message type:
> - 1: IOTLB miss
> - 2: IOTLB update
> - 3: IOTLB invalidate
> diff --git a/docs/memory-hotplug.txt b/docs/memory-hotplug.txt
> index d96397c1af..6aa5e17e26 100644
> --- a/docs/memory-hotplug.txt
> +++ b/docs/memory-hotplug.txt
> @@ -62,7 +62,7 @@ It's also possible to start a guest with memory
> cold-plugged into the
> hotpluggable memory slots. This might seem counterintuitive at first,
> but this allows for a lot of flexibility when using the file backend.
>
> -In the following command-line example, a 8GB guest is created where 6GB
> +In the following command-line example, an 8GB guest is created where 6GB
> comes from regular RAM, 1GB is a 1GB hugepage page and 256MB is from
> 2MB pages. Also, the guest has additional memory slots to hotplug more
> 2GB if needed:
> diff --git a/docs/multiseat.txt b/docs/multiseat.txt
> index 807518c8af..fb7e790b22 100644
> --- a/docs/multiseat.txt
> +++ b/docs/multiseat.txt
> @@ -62,7 +62,7 @@ to its own window so you can see both display devices
> side-by-side.
>
> For vnc some additional configuration on the command line is needed.
> We'll create two vnc server instances, and bind the second one to the
> -second seat, simliar to input devices:
> +second seat, similar to input devices:
>
> -display vnc=:1,id=primary \
> -display vnc=:2,id=secondary,display=video.2
> diff --git a/docs/qemu-block-drivers.texi b/docs/qemu-block-drivers.texi
> index f1793692bb..38e9f34cc9 100644
> --- a/docs/qemu-block-drivers.texi
> +++ b/docs/qemu-block-drivers.texi
> @@ -524,7 +524,7 @@ You can create a cloned image from the existing snapshot.
> @example
> qemu-img create -b sheepdog:///@address@hidden sheepdog:///@var{image}
> @end example
> -where @var{base} is a image name of the source snapshot and @var{tag}
> +where @var{base} is an image name of the source snapshot and @var{tag}
> is its tag name.
>
> You can use an unix socket instead of an inet socket:
> diff --git a/docs/qemupciserial.inf b/docs/qemupciserial.inf
> index 6f7eef49cc..7ca766745d 100644
> --- a/docs/qemupciserial.inf
> +++ b/docs/qemupciserial.inf
> @@ -1,7 +1,7 @@
> ; qemupciserial.inf for QEMU, based on MSPORTS.INF
>
> ; The driver itself is shipped with Windows (serial.sys). This is
> -; just a inf file to tell windows which pci id the serial pci card
> +; just an inf file to tell windows which pci id the serial pci card
> ; emulated by qemu has, and to apply a name tag to it which windows
> ; will show in the device manager.
>
> diff --git a/docs/specs/acpi_nvdimm.txt b/docs/specs/acpi_nvdimm.txt
> index 3f322e6f55..3ec42ecbce 100644
> --- a/docs/specs/acpi_nvdimm.txt
> +++ b/docs/specs/acpi_nvdimm.txt
> @@ -72,7 +72,8 @@ for NVDIMM ACPI.
>
> Memory:
> QEMU uses BIOS Linker/loader feature to ask BIOS to allocate a memory
> - page and dynamically patch its into a int32 object named "MEMA" in ACPI.
> + page and dynamically patch its address into an int32 object named "MEMA"
> + in ACPI.
>
> This page is RAM-based and it is used to transfer data between _DSM
> method and QEMU. If ACPI has control, this pages is owned by ACPI which
> diff --git a/docs/specs/ppc-spapr-hcalls.txt b/docs/specs/ppc-spapr-hcalls.txt
> index 5bd8eab78f..93fe3da91b 100644
> --- a/docs/specs/ppc-spapr-hcalls.txt
> +++ b/docs/specs/ppc-spapr-hcalls.txt
> @@ -10,7 +10,7 @@ calls which are mostly used as a private interface between
> the firmware
> running in the guest and QEMU.
>
> All those hypercalls start at hcall number 0xf000 which correspond
> -to a implementation specific range in PAPR.
> +to an implementation specific range in PAPR.
>
> - H_RTAS (0xf000)
>
> diff --git a/docs/specs/tpm.txt b/docs/specs/tpm.txt
> index c230c4c93e..575a267611 100644
> --- a/docs/specs/tpm.txt
> +++ b/docs/specs/tpm.txt
> @@ -252,7 +252,7 @@ swtpm socket --tpmstate dir=/tmp/mytpm1 \
> --ctrl type=unixio,path=/tmp/mytpm1/swtpm-sock \
> --log level=20 --tpm2
>
> -In the 2nd terminal restore the state of the VM using the additonal
> +In the 2nd terminal restore the state of the VM using the additional
> '-incoming' option.
>
> qemu-system-x86_64 -display sdl -enable-kvm \
> diff --git a/docs/usb2.txt b/docs/usb2.txt
> index 09df45b5b1..9e47169f45 100644
> --- a/docs/usb2.txt
> +++ b/docs/usb2.txt
> @@ -15,7 +15,7 @@ the PIIX3 chipset. The USB 1.1 bus will carry the name
> "usb-bus.0".
>
> You can use the standard -device switch to add a EHCI controller to
> your virtual machine. It is strongly recommended to specify an ID for
> -the controller so the USB 2.0 bus gets a individual name, for example
> +the controller so the USB 2.0 bus gets an individual name, for example
> '-device usb-ehci,id=ehci". This will give you a USB 2.0 bus named
> "ehci.0".
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- Re: [Qemu-trivial] [Qemu-devel] [PATCH] docs: Grammar and spelling fixes,
Markus Armbruster <=