[PATCH 2/3] hw/intc/arm_gicv3: Use bitops.h uint32_t bit array functions

[Peter Maydell]

Now we have official uint32_t bit array functions in bitops.h, use
them instead of the hand-rolled local versions.

We retain gic_bmp_replace_bit() because bitops doesn't provide that
specific functionality.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 include/hw/intc/arm_gicv3_common.h | 54 ++++++++----------------------
 1 file changed, 14 insertions(+), 40 deletions(-)

diff --git a/include/hw/intc/arm_gicv3_common.h 
b/include/hw/intc/arm_gicv3_common.h
index cd09bee3bc4..a3d6a0e5077 100644
--- a/include/hw/intc/arm_gicv3_common.h
+++ b/include/hw/intc/arm_gicv3_common.h
@@ -51,13 +51,13 @@
 /* Maximum number of list registers (architectural limit) */
 #define GICV3_LR_MAX 16
 
-/* For some distributor fields we want to model the array of 32-bit
+/*
+ * For some distributor fields we want to model the array of 32-bit
  * register values which hold various bitmaps corresponding to enabled,
- * pending, etc bits. These macros and functions facilitate that; the
- * APIs are generally modelled on the generic bitmap.h functions
- * (which are unsuitable here because they use 'unsigned long' as the
- * underlying storage type, which is very awkward when you need to
- * access the data as 32-bit values.)
+ * pending, etc bits. We use the set_bit32() etc family of functions
+ * from bitops.h for this. For a few cases we need to implement some
+ * extra operations.
+ *
  * Each bitmap contains a bit for each interrupt. Although there is
  * space for the PPIs and SGIs, those bits (the first 32) are never
  * used as that state lives in the redistributor. The unused bits are
@@ -65,39 +65,13 @@
  * avoids bugs where we forget to subtract GIC_INTERNAL from an
  * interrupt number.
  */
-#define GICV3_BMP_SIZE DIV_ROUND_UP(GICV3_MAXIRQ, 32)
-
-#define GIC_DECLARE_BITMAP(name) \
-    uint32_t name[GICV3_BMP_SIZE]
-
-#define GIC_BIT_MASK(nr) (1U << ((nr) % 32))
-#define GIC_BIT_WORD(nr) ((nr) / 32)
-
-static inline void gic_bmp_set_bit(int nr, uint32_t *addr)
-{
-    uint32_t mask = GIC_BIT_MASK(nr);
-    uint32_t *p = addr + GIC_BIT_WORD(nr);
-
-    *p |= mask;
-}
-
-static inline void gic_bmp_clear_bit(int nr, uint32_t *addr)
-{
-    uint32_t mask = GIC_BIT_MASK(nr);
-    uint32_t *p = addr + GIC_BIT_WORD(nr);
-
-    *p &= ~mask;
-}
-
-static inline int gic_bmp_test_bit(int nr, const uint32_t *addr)
-{
-    return 1U & (addr[GIC_BIT_WORD(nr)] >> (nr & 31));
-}
+#define GIC_DECLARE_BITMAP(name) DECLARE_BITMAP32(name, GICV3_MAXIRQ)
+#define GICV3_BMP_SIZE BITS_TO_U32S(GICV3_MAXIRQ)
 
 static inline void gic_bmp_replace_bit(int nr, uint32_t *addr, int val)
 {
-    uint32_t mask = GIC_BIT_MASK(nr);
-    uint32_t *p = addr + GIC_BIT_WORD(nr);
+    uint32_t mask = BIT32_MASK(nr);
+    uint32_t *p = addr + BIT32_WORD(nr);
 
     *p &= ~mask;
     *p |= (val & 1U) << (nr % 32);
@@ -106,7 +80,7 @@ static inline void gic_bmp_replace_bit(int nr, uint32_t 
*addr, int val)
 /* Return a pointer to the 32-bit word containing the specified bit. */
 static inline uint32_t *gic_bmp_ptr32(uint32_t *addr, int nr)
 {
-    return addr + GIC_BIT_WORD(nr);
+    return addr + BIT32_WORD(nr);
 }
 
 typedef struct GICv3State GICv3State;
@@ -301,15 +275,15 @@ struct GICv3State {
 #define GICV3_BITMAP_ACCESSORS(BMP)                                     \
     static inline void gicv3_gicd_##BMP##_set(GICv3State *s, int irq)   \
     {                                                                   \
-        gic_bmp_set_bit(irq, s->BMP);                                   \
+        set_bit32(irq, s->BMP);                                         \
     }                                                                   \
     static inline int gicv3_gicd_##BMP##_test(GICv3State *s, int irq)   \
     {                                                                   \
-        return gic_bmp_test_bit(irq, s->BMP);                           \
+        return test_bit32(irq, s->BMP);                                 \
     }                                                                   \
     static inline void gicv3_gicd_##BMP##_clear(GICv3State *s, int irq) \
     {                                                                   \
-        gic_bmp_clear_bit(irq, s->BMP);                                 \
+        clear_bit32(irq, s->BMP);                                       \
     }                                                                   \
     static inline void gicv3_gicd_##BMP##_replace(GICv3State *s,        \
                                                   int irq, int value)   \
-- 
2.34.1