[Qemu-stable] [PATCH 33/97] pc: acpi: revert back to 1 SRAT entry for hotpluggable area

[Michael Roth]

From: Igor Mammedov <address@hidden>

Commit
  10efd7e108 "pc: acpi: fix memory hotplug regression by reducing stub SRAT 
entry size"
attemped to fix hotplug regression introduced by
  848a1cc1e "hw/acpi-build: build SRAT memory affinity structures for DIMM 
devices"

fixed issue for Windows/3.0+ linux kernels, however it regressed 2.6 based
kernels (RHEL6) to the point where guest might crash at boot.
Reason is that 2.6 kernel discards SRAT table due too small last entry
which down the road leads to crashes. Hack I've tried in 10efd7e108 is also
not ACPI spec compliant according to which whole possible RAM should be
described in SRAT. Revert 10efd7e108 to fix regression for 2.6 based kernels.

With 10efd7e108 reverted, I've also tried splitting SRAT table statically
in different ways %/node and %/slot but Windows still fails to online
2nd pc-dimm hot-plugged into node 0 (as described in 10efd7e108) and
sometimes even coldplugged pc-dimms where affected with static SRAT
partitioning.
The only known so far way where Windows stays happy is when we have 1
SRAT entry in the last node covering all hotplug area.

Revert 848a1cc1e until we come up with a way to avoid regression
on Windows with hotplug area split in several entries.
Tested this with 2.6/3.0 based kernels (RHEL6/7) and WS20[08/12/12R2/16]).

Signed-off-by: Igor Mammedov <address@hidden>
Acked-by: Laszlo Ersek <address@hidden>
Reviewed-by: Eduardo Habkost <address@hidden>
Reviewed-by: Michael S. Tsirkin <address@hidden>
Signed-off-by: Michael S. Tsirkin <address@hidden>
(cherry picked from commit dbb6da8ba7e02105bdbb33b527e088249c9843c8)
Signed-off-by: Michael Roth <address@hidden>
---
 hw/i386/acpi-build.c | 73 ++++++++------------------------------------
 1 file changed, 12 insertions(+), 61 deletions(-)

diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
index e1ee8ae9e0..1599caa7c5 100644
--- a/hw/i386/acpi-build.c
+++ b/hw/i386/acpi-build.c
@@ -2251,64 +2251,6 @@ build_tpm2(GArray *table_data, BIOSLinker *linker, 
GArray *tcpalog)
 #define HOLE_640K_START  (640 * KiB)
 #define HOLE_640K_END   (1 * MiB)
 
-static void build_srat_hotpluggable_memory(GArray *table_data, uint64_t base,
-                                           uint64_t len, int default_node)
-{
-    MemoryDeviceInfoList *info_list = qmp_memory_device_list();
-    MemoryDeviceInfoList *info;
-    MemoryDeviceInfo *mi;
-    PCDIMMDeviceInfo *di;
-    uint64_t end = base + len, cur, size;
-    bool is_nvdimm;
-    AcpiSratMemoryAffinity *numamem;
-    MemoryAffinityFlags flags;
-
-    for (cur = base, info = info_list;
-         cur < end;
-         cur += size, info = info->next) {
-        numamem = acpi_data_push(table_data, sizeof *numamem);
-
-        if (!info) {
-            /*
-             * Entry is required for Windows to enable memory hotplug in OS
-             * and for Linux to enable SWIOTLB when booted with less than
-             * 4G of RAM. Windows works better if the entry sets proximity
-             * to the highest NUMA node in the machine at the end of the
-             * reserved space.
-             * Memory devices may override proximity set by this entry,
-             * providing _PXM method if necessary.
-             */
-            build_srat_memory(numamem, end - 1, 1, default_node,
-                              MEM_AFFINITY_HOTPLUGGABLE | 
MEM_AFFINITY_ENABLED);
-            break;
-        }
-
-        mi = info->value;
-        is_nvdimm = (mi->type == MEMORY_DEVICE_INFO_KIND_NVDIMM);
-        di = !is_nvdimm ? mi->u.dimm.data : mi->u.nvdimm.data;
-
-        if (cur < di->addr) {
-            build_srat_memory(numamem, cur, di->addr - cur, default_node,
-                              MEM_AFFINITY_HOTPLUGGABLE | 
MEM_AFFINITY_ENABLED);
-            numamem = acpi_data_push(table_data, sizeof *numamem);
-        }
-
-        size = di->size;
-
-        flags = MEM_AFFINITY_ENABLED;
-        if (di->hotpluggable) {
-            flags |= MEM_AFFINITY_HOTPLUGGABLE;
-        }
-        if (is_nvdimm) {
-            flags |= MEM_AFFINITY_NON_VOLATILE;
-        }
-
-        build_srat_memory(numamem, di->addr, size, di->node, flags);
-    }
-
-    qapi_free_MemoryDeviceInfoList(info_list);
-}
-
 static void
 build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine)
 {
@@ -2414,10 +2356,19 @@ build_srat(GArray *table_data, BIOSLinker *linker, 
MachineState *machine)
         build_srat_memory(numamem, 0, 0, 0, MEM_AFFINITY_NOFLAGS);
     }
 
+    /*
+     * Entry is required for Windows to enable memory hotplug in OS
+     * and for Linux to enable SWIOTLB when booted with less than
+     * 4G of RAM. Windows works better if the entry sets proximity
+     * to the highest NUMA node in the machine.
+     * Memory devices may override proximity set by this entry,
+     * providing _PXM method if necessary.
+     */
     if (hotplugabble_address_space_size) {
-        build_srat_hotpluggable_memory(table_data, 
machine->device_memory->base,
-                                       hotplugabble_address_space_size,
-                                       pcms->numa_nodes - 1);
+        numamem = acpi_data_push(table_data, sizeof *numamem);
+        build_srat_memory(numamem, machine->device_memory->base,
+                          hotplugabble_address_space_size, pcms->numa_nodes - 
1,
+                          MEM_AFFINITY_HOTPLUGGABLE | MEM_AFFINITY_ENABLED);
     }
 
     build_header(linker, table_data,
-- 
2.17.1