[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-stable] [PATCH] target-i386: Preserve the Z bit for bt/bts/btr/btc
From: |
Richard Henderson |
Subject: |
[Qemu-stable] [PATCH] target-i386: Preserve the Z bit for bt/bts/btr/btc |
Date: |
Mon, 12 May 2014 14:28:22 -0700 |
Older Intel manuals (pre-2010) and current AMD manuals describe Z as
undefined, but newer Intel manuals describe Z as unchanged.
Cc: address@hidden
Reviewed-by: Paolo Bonzini <address@hidden>
Signed-off-by: Richard Henderson <address@hidden>
---
target-i386/translate.c | 40 +++++++++++++++++++++++++++++++---------
1 file changed, 31 insertions(+), 9 deletions(-)
diff --git a/target-i386/translate.c b/target-i386/translate.c
index 02625e3..032b0fd 100644
--- a/target-i386/translate.c
+++ b/target-i386/translate.c
@@ -6708,41 +6708,63 @@ static target_ulong disas_insn(CPUX86State *env,
DisasContext *s,
}
bt_op:
tcg_gen_andi_tl(cpu_T[1], cpu_T[1], (1 << (3 + ot)) - 1);
+ tcg_gen_shr_tl(cpu_tmp4, cpu_T[0], cpu_T[1]);
switch(op) {
case 0:
- tcg_gen_shr_tl(cpu_cc_src, cpu_T[0], cpu_T[1]);
- tcg_gen_movi_tl(cpu_cc_dst, 0);
break;
case 1:
- tcg_gen_shr_tl(cpu_tmp4, cpu_T[0], cpu_T[1]);
tcg_gen_movi_tl(cpu_tmp0, 1);
tcg_gen_shl_tl(cpu_tmp0, cpu_tmp0, cpu_T[1]);
tcg_gen_or_tl(cpu_T[0], cpu_T[0], cpu_tmp0);
break;
case 2:
- tcg_gen_shr_tl(cpu_tmp4, cpu_T[0], cpu_T[1]);
tcg_gen_movi_tl(cpu_tmp0, 1);
tcg_gen_shl_tl(cpu_tmp0, cpu_tmp0, cpu_T[1]);
- tcg_gen_not_tl(cpu_tmp0, cpu_tmp0);
- tcg_gen_and_tl(cpu_T[0], cpu_T[0], cpu_tmp0);
+ tcg_gen_andc_tl(cpu_T[0], cpu_T[0], cpu_tmp0);
break;
default:
case 3:
- tcg_gen_shr_tl(cpu_tmp4, cpu_T[0], cpu_T[1]);
tcg_gen_movi_tl(cpu_tmp0, 1);
tcg_gen_shl_tl(cpu_tmp0, cpu_tmp0, cpu_T[1]);
tcg_gen_xor_tl(cpu_T[0], cpu_T[0], cpu_tmp0);
break;
}
- set_cc_op(s, CC_OP_SARB + ot);
if (op != 0) {
if (mod != 3) {
gen_op_st_v(s, ot, cpu_T[0], cpu_A0);
} else {
gen_op_mov_reg_v(ot, rm, cpu_T[0]);
}
+ }
+
+ /* Delay all CC updates until after the store above. Note that
+ C is the result of the test, Z is unchanged, and the others
+ are all undefined. */
+ switch (s->cc_op) {
+ case CC_OP_MULB ... CC_OP_MULQ:
+ case CC_OP_ADDB ... CC_OP_ADDQ:
+ case CC_OP_ADCB ... CC_OP_ADCQ:
+ case CC_OP_SUBB ... CC_OP_SUBQ:
+ case CC_OP_SBBB ... CC_OP_SBBQ:
+ case CC_OP_LOGICB ... CC_OP_LOGICQ:
+ case CC_OP_INCB ... CC_OP_INCQ:
+ case CC_OP_DECB ... CC_OP_DECQ:
+ case CC_OP_SHLB ... CC_OP_SHLQ:
+ case CC_OP_SARB ... CC_OP_SARQ:
+ case CC_OP_BMILGB ... CC_OP_BMILGQ:
+ /* Z was going to be computed from the non-zero status of CC_DST.
+ We can get that same Z value (and the new C value) by leaving
+ CC_DST alone, setting CC_SRC, and using a CC_OP_SAR of the
+ same width. */
tcg_gen_mov_tl(cpu_cc_src, cpu_tmp4);
- tcg_gen_movi_tl(cpu_cc_dst, 0);
+ set_cc_op(s, ((s->cc_op - CC_OP_MULB) & 3) + CC_OP_SARB);
+ break;
+ default:
+ /* Otherwise, generate EFLAGS and replace the C bit. */
+ gen_compute_eflags(s);
+ tcg_gen_deposit_tl(cpu_cc_src, cpu_cc_src, cpu_tmp4,
+ ctz32(CC_C), 1);
+ break;
}
break;
case 0x1bc: /* bsf / tzcnt */
--
1.9.0
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Qemu-stable] [PATCH] target-i386: Preserve the Z bit for bt/bts/btr/btc,
Richard Henderson <=